Summary of BT HP01
Page 2
Contents important safety instructions -------------------------------------2 bt hp01 --------------------------------------------- ----------------4 - bt hp01 anatomy ----------------- ------------------------- -------5 - - adjusting the headband -------------------------------------------6 connect...
Page 3
Important safety instructions . Read this user manual carefully and completely before using the product. . Always include this user manual when passing this product on to third parties. . Do not use a defective product if found. Preventing damage to health and accidents . Do not listen at high volum...
Page 4
Safety instructions for the lithium –polymer battery pack if abused or misused, the battery pack may leak. In extreme cases, it may even present an explosion or fire hazard. . Heat generation . Fire development . Explosion . Smoke of gas development please note that nakamichi does not accept liabili...
Page 5
Bt hp01 – bluetooth headphone the bt hp01 is a headphone which allows for wireless music streaming when used with mobile phones or other bluetooth devices/bluetooth compliant devices. Bluetooth the bt hp01 complies with the bluetooth 3.0 standard. Via its bluetooth interface, it can be connected to ...
Page 6: Bt Hp01’S Anatomy
Ch ar ge bt hp01’s anatomy 1. Usb interface for charging 2. Volume up (+) 3. Volume down (-) 4. Power on/off button 5. Microphone 6. Previous track 7. Play/pause button 8. Next track 1. 4. 5. 6. 7. 8. 3. 2. Page 5.
Page 7
Adjusting the headband for optimum transmission quality, good noise attenuation and best possible comfort, the headband has to be adjusted to properly fit your head: . Wear the headset so that the headband runs over the top of your head. . Adjust the length of the headband so that the ear pads rest ...
Page 8
Pairing the bt hp01 with an audio source if the device is connect to an audio source via bluetooth, the led will flash blue three times and you will hear a beeping sound. This indicated the device is now connected with the audio source. If no device is found within approximately five minutes, the le...
Page 9
Changing the volume the bt hp01 allows you to change the volume of the audio signal during a call or while listening to music: v+ incrementally increases the volume. If you press the respective button briefly, the volume changes incrementally, if you hold down the button, the volume changes continuo...
Page 10
Remote-controlling the connect devices from bt hp01 you can directly control any device support bluetooth avrcp profile via the buttons on the device. Please kindly refer to the instruction manual of your audio source for information on whether your audio source supports the bluetooth avrcp profile....
Page 11
Managing calls when the device is connected to mobile phone. When you received a call, the led will flash blue three times per second. You can also hear the ringtone of the mobile phone, if your mobile phone supports this function. If your mobile phone automatically transfer the call to the headset,...
Page 12
Troubleshooting problems possible cause solution device cannot be switch on press once to pause or play the current track music. Recharge the device. No audio signal during a connected bluetooth connection the device is switched off. Switch the device on. The device is not paired with an audio sourc...
Page 13
Fcc statement this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses an...
Page 14
Specifications speaker diameter Ф40mm frequency response 20 – 20,000 hz impedance 32Ω sound pressure level at 1 khz113db rated output power 20 mw aggregate capability 50 mw battery 400 mah charging cable length 1.5 m weight 200g o o operating temperature range -10 c - 45 c o o storage temperature ra...
Page 15
Wow technologies limited warranty (u.S only) wow technologies warrants this product against defects in materials or workmanship, under normal use, in accordance with the specifications and warnings, for a period of 12 months from the original date of purchase of the product. Pursuant to this limited...
Page 16: 304131111
Instructions: to obtain warranty service, you must deliver the product with the valid proof of purchase in the form of original sales receipt from wow technologies or a wow technologies’ retailer showing the product name and the date of purchase, freight prepaid, in either its original packaging or ...