Nakamichi NA200R Service Manual - Function Setting
Function Setting
1 Press to access into the [AUDIO MENU] mode, press and hold to enter into the [MENU] mode.
2 Press repeatedly to select the item to be adjusted.
3 Turn the encoder volume knob to select a value / option.
MENU
[AUDIO MENU]...
[MENU]...
Item Selectable Setting
Item Selectable Setting
BASS ADJUST
CLOCK
MIDDLE ADJUST
SUBWOOFER ADJUST
TREBLE ADJUST
BASS LEVEL
CLOCK SET
MIDDLE LEVEL
SUBWOOFER
TREBLE LEVEL
BASS CFQ
CLOCK FORMAT
MIDDLE CFQ
SUBWOOFER LPF
RESUME
BEEP TONE
DIMMER
VRD DISPLAY COLOR
DEMO
TREBLE CFQ
BALANCE
FADER
Adjust the level -7 to +7.
Adjust the Hours and Minutes
Adjust the level -7 to +7.
Adjust the level 0 to 12.
Adjust the level -7 to +7.
Select the center frequency: 60 / 80 / 100 / 200
Select the time format 12H or 24H
Select the center frequency: 0.5K / 1.0K / 1.5K / 2.5K
Subwoofer low pass filter range: 80 / 120 / 160
Resume the preset EQ value to factory default value.
Turn On or Off this beep sound
Adjust the LCD display backlight level between Hight or Low
This unit is equipped with variable color display. Once into the DISPLAY COLOR mode, rotating
encoder volume knob to selected the LCD color.
To automatically demo this unit’s major features cyclic on LCD display.
Select the center frequency: 10.0K / 12.5K / 15.0K / 17.5K
Adjust the balance between the right and left speakers from 12R (full right) to
12L (full left).
Adjust the fader between the front and rear speakers from 12R (full rear) to
12L (full front).
■
COLOR SCAN (default setting); WHITE; GREEN 1; GREEN 2; GREEN 3; AMBER; PINK 1; PINK 2;
PURPLE 1; PURPLE 2; BLUE 1; BLUE 2; USER COLOR; ORANGE