Nambison's SoftroniX Hi-Power Digi-Scope User Manual - page 2
*The actual product may not be the same as displayed in the photographs. Page No. 1
n
a
m
b
is
o
n
’s
Get Set Go:
Get Set Go:
Get Set Go:
Get Set Go:
1.
Make connections
1
2.
Power supply
(The device needs 5.0 Volts)
2
3.
Line out connections
(Speaker/Computer/iPod/PDA/Headphone)
3
4.
Recommended Hardware
4
5.
Recommended Software
5
6.
Audio Driver/Software settings
7
7.
General Maintenance and Cleaning
7
8.
Service and Warranty
8
1. Make connections:
First of all make sure that the Hi
Hi
Hi
Hi----Power
Power
Power
Power
Dig
Dig
Dig
Digiiii----Scope
Scope
Scope
Scope
is free of physical damages, if not, please report
your supplier. Then, connect the power supply as
illustrated
. Make
line out
connections. Switch On the
instrument by pressing down the switch on the
front panel
& look for Red light at the top panel which
when glowing indicates the instrument is ready for use.
FRONT VIEW
FRONT VIEW
FRONT VIEW
FRONT VIEW