User manual clip on reverse mirror monitor & camera pack ncp-mir43.
Thank you for purchasing nanocam plus' 4.3" reverse mirror monitor & camera pack. We are certain that our product will give you trouble- free operation while providing you with a safety feature that enhances your driving experience. Our products, like most after-market safety enhanced devices, are d...
3 ncp-mir43 component list & package contents: • mirror monitor • camera • 6m av cable • power cable • camera connection cable important notice 1. Please read this manual carefully before using the product. 2. This unit is for vehicles with 12v dc only. 3. Route wiring harness away from heat sources...
4 wiring diagram front view option: ncp-mir43 functions as a rear view camera standard and also supports front view application. For front view application, you can cut the thin white wire near the camera lead and restart power to see the image reversed. Grid-line option: ncp-mir43 comes with parkin...
5 installing the mirror 1. Place the cable over the front of the mirror so that it does not get caught between the mirror monitor and your vehicles rear view mirror during installation. 2. Place the clips on the top of the mirror monitor on the top of your rear view mirror. 3. Place your thumbs on t...
6 trouble shooting problem solution “no signal” appears while reversing 1. Check video input connections 2. Check camera power connections video image is not sharp check camera lens for debris maintenance always keep camera clear from dirt and mud. Clean camera with a soft moist cloth..
7 warranty terms & conditions our goods come with guarantees that cannot be excluded under the australian & new zealand consumer law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to hav...
Www.Nanocamplus.Com.Au www.Nanocamplus.Co.Nz © nanocam plus 2016.
