NanoEnTek JuLi Stage Quick Manual - page 8
Manual is about: automated cell imaging system
of
12
8
Manual position set and Manual focus
1. Click a well you want to capture using the Right
mouse button.
2. Once the well is selected, stage is automatically
moved to center of well. Move to position you
want using the Right mouse button, and check
where you moved to within the navigation window.
3. Turn on the Manual Focus toggle button.
4. Select the LED channel.
5. Adjust the Exposure, Brightness and LED power and
D-Phase, if necessary.
6. Find optional focus adjusting the Focus
bar and buttons.
7. Set Focus button is used to assign
optional focus per each position. After setting
the focus of each position, press the Set
Focus button to save setting value.