Np11g wifi bridge — user manual 1.
Np11g wifi bridge — user manual 2 thanks for choosing nanosat np11g wifi bridge. This portable device works best with nanosat receivers to access wireless network easily. A must have for homestream, ip movie (video club) and ip radio. 1. Introduction.
Np11g wifi bridge — user manual 3 np11g provides users a combination of ethernet network and power cable, np11g uses the original power supply of ip camera or some other it products’ power supply which has dc 2.0 power jack (5- 15v, 1.5w). One power supply can power np11g, as well as the ip camera a...
Np11g wifi bridge — user manual 4 please set this np11g before using it, you can connect it to pc and run the np11g_setup.Exe in the cd. The physical connection for setup as below: 2. Setup.
Np11g wifi bridge — user manual 5 1) please put into the cd-rom, the system will automati- cally eject the disk and guide page, please refer to the right picture and click the corresponding label. 2) please click install software label to run the set up pro- gram, if it’s shown the right picuture, p...
Np11g wifi bridge — user manual 6 3) if it’s shown the right picture, please click yes to install- winpcap program. 4) please click next, don’t need to do other settings until finish..
Np11g wifi bridge — user manual 7 5) after the installation is complete, please double click the desktop icon , the right picture shows it is searching the product mac. 6) please click next, don’t need to do other settings until finish..
Np11g wifi bridge — user manual 8 7) the right picture shows the product has searched the- wifi network, please choose the correct wifi network. Wpa wpa automatically uses tkip with dynamic encryption keys. Enter a passphrase on this screen. Encryption - tkip is automatically selected as the encrypt...
Np11g wifi bridge — user manual 9 wep (128-bit) or wep (64-bit) enter a passphrase in the passphrase field and click next. If you want to manually enter a wep key, leave the passphrase field blank and click next. Key 1-4 - one to four fields will be displayed, depending on the level of encryption yo...
Np11g wifi bridge — user manual 10 10) the product is shown on the picture to obtain a gateway router. Make sure the bridge’s wireless led is solidly lit or flashing. This indicates that the bridge has connected to the wireless network. If the attempt succeeds, proceed to screen 12. If the attempt f...
Np11g wifi bridge — user manual 11 11) the right picture shows the product to obtain the gateway router successfully completed all the configurations to this, please click success- fully associated to wireless icon, then click exit to exit the installationwizard. To make sure np11g is working, cut o...
