Napa 00-99-000942 Owner's Manual - page 9

•

 5 

•

BATTERy CHARGING - AC CONNECTIONS

8. 

This battery charger is for use on a nominal 120-volt 

8.1 

circuit.

NOTE: The NIN-800A intermittently draws more than 

15 amps of current. We recommend that you either 

install a 20 amp circuit or do not run anything else on 

the same circuit as the NIN-800A or you may trip the 

breaker supplying the AC power.

DANGER – Never alter AC cord or plug provided – if it does not fit the 

outlet, have proper outlet installed by a qualified electrician. Improper 

connection can result in a risk of an electric shock.

Recommended minimum AWG size for extension cords for battery 

chargers 

Use of an extension cord is not recommended by manufacturer. If one 

8.2 

must be used, refer to the following chart:

Length of 

Cord

feet (m)

25

(7.6)

50

(15.2)

Gauge

12

10

ASSEMBLy INSTRUCTIONS

9. 

No assembly required.

9.1 

CONTROL PANEL

10.