Napa 6-798 Instruction Manual - Warning!
▲
WARNING!
FAILURE TO OBSERVE THESE WARNINGS COULD RESULT IN INJURY.
This
insTrucTion
Manual
conTains iMporTanT safeTy
inforMaTion.
read This insTruc
Tion Manual care
fully and under
sTand all inforMa
Tion
Before
operaT
ing This Tool.
• Always operate, inspect and
maintain this tool in accor-
dance with American Nation-
al Standards Institute Safety
Code of Portable Air Tools
(ANSI B86.) and any other
applicable safety codes and
regulations.
• For safety, top performance
and maximum durability of
parts, operate this tool at 90
psig 6.2 bar max air pressure
with ⁄2" diameter air supply
hose.
• Always wear impact-resistant
eyeandfaceprotectionwhen
operatingorperformingmain-
tenance on this tool. Always
wearhearingprotectionwhen
usingthistool.
• High sound levels can cause
permanent hearing loss. Use
hearing protection as recom-
mended by your employer or
OSHAregulation.
• Keepthetoolinefficientoper-
atingcondition.
• Operators and maintenance
personnel must be physical-
ly able to handle the bulk,
weight and power of this
tool.
• Air under pressure can
cause severe injury. Never
directairatyourselforothers.
Alwaysturnofftheairsupply,
drainhoseofairpressureand
detach tool from air supply
beforeinstalling,removingor
adjustinganyaccessoryonthis
tool, or before performing
anymaintenanceonthistool.
Failuretodosocouldresultin
injury. Whip hoses can cause
serious injury. Always check
for damaged, frayed or loose
hosesandfittings,andreplace
immediately.Donotusequick
detach couplings at tool. See
instructionsforcorrectset-up.
• Airpoweredtoolscanvibrate
in use. Vibration, repetitive
motions or uncomfortable
positions over extended peri-
ods of time may be harmful
to your hands and arms. Dis-
continueuseoftoolifdiscom-
fort, tingling feeling or pain
occurs. Seek medical advice
beforeresuminguse.
• Place the tool on the work
before starting the tool. Do
not point or indulge in any
horseplaywiththistool.
• Slipping, tripping and/or fall-
ing while operating air tools
canbeamajorcauseofseri-
ousinjuryordeath.Beaware
ofexcesshoseleftonthewalk-
ingorworksurface.
• Keep body working stance
balanced and firm. Do not
overreachwhenoperatingthe
tool.
• Anticipateandbealertforsud-
denchangesinmotionduring
startupandoperationofany
powertool.
•Donotcarrytoolbythehose.
Protect the hose from sharp
objectsandheat.
• Tool shaft may continue to
rotate briefly after throttle is
released.Avoiddirectcontact
with accessories during and
after use. Gloves will reduce
theriskofcutsorburns.
•Keepawayfromrotatingend
of tool. Do not wear jewelry
orlooseclothing.Securelong
hair.Scalpingcanoccurifhair
is not kept away from tool
and accessories. Choking can
occur if neckwear is not kept
away from tool and accesso-
ries.
• Do not lubricate tools with
flammable or volatile liquids
suchaskerosene,dieselorjet
fuel.
• Impact wrenches are not
torque control devices. Fas-
teners with specific torque
requirementsmustbechecked
with suitable torque measur-
ing devices after installation
withanimpactwrench.
• Useonlyimpactwrenchsock-
ets and accessories on this
tool.Donotusehandsockets
andaccessories.
• Don'tforcetoolbeyonditsrat-
edcapacity.
• Do not remove any labels.
Replaceanydamagedlabels.
• Use accessories recommend-
ed by NAPA Professional Air
please revieW all Warning insTrucTions prior To operaTion. save This Manual for fuTure reference.
2