Napa/Evercraft 775-0232 Instruction Manual & Parts Breakdown

Rev. 05/13/02

775-0232

1

®

ALWAYS READ 

INSTRUCTIONS

BEFORE USING

POWER TOOLS

ALWAYS WEAR 

SAFETY GOGGLES

WEAR HEARING 

PROTECTION

AVOID 

PROLONGED 

EXPOSURE TO 

VIBRATION

INSTRUCTION MANUAL & PARTS BREAKDOWN

775-0232

Rt. Angle Die Grinder

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to cause cancer, birth defects

or other reproductive harm. Some examples of these chemicals are:

• lead from lead-based paints,

• crystalline silica from bricks and cement 

and other masonry products, and

• arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those

dust masks that are specially designed to filter out microscopic particles.

Specifications

Free Speed  . . . . . . . . .18,000 RPM

Collet Size  . . . . . . . . . . . . . . .1/4"

Air Inlet  . . . . . . . . . . . . .1/4" NPT

Hose Size  . . . . . . . . . . . . . .3/8" ID

Air Pressure  . . . . . . . . . . . . .90 PSI

Air Consumption  . . . . . . . .4 CFM

Sound Level . . . . . . . . . . . .85 dBA

Length . . . . . . . . . . . . . . . . .6-1/2"

Shipping Wt.  . . . . . . . . .1-3/5 Lbs.

• MAXIMUM RPM OF 18,000

• MAX AIR PRESSURE: 90 PSIG,

6.2 BAR

• RPM OF THE ACCESSORY

MUST EXCEED TOOL RPM