NAPCO CICP1100 Datasheet - page 2
Continental Instruments, A Napco Security Group Company
•
355 Bayview Ave., Amityville, NY 11701
(631) 842-9400
•
FAX (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H
CardAccess® and CI SQL 3000™ are trademarks of Continental/NAPCO. © Continental Instruments/NAPCO, 2003.
Door Contact
Electric
Door Strike
Door Lock
Power Supply
RS422 to Panels
Continental
Instruments llc
Request to Exit
Motion Detector
Door Contact
Card Reader
Request
to Exit
Bu
Door Lock
A or B
G
D
G
G
G
Request
to Exit
G
H
G
NOTE: Request to Exit motion detectors will require
an additional 12VDC power cable. Exit devices are
typically mounted on the egress side of door.
CardAccess 3000
Database and
Communications
Server
CICE1940PL-1
Polling Line Converter
RS232 to RS422
Required if server is not located
within 50
RS422 Repeat Mode Communications Network
4000' max. distance between controllers.
Up to 63 controllers on a Repeat Mode Network.
perterm
Sup
p
perterm
Sup
p
RS422
x. 4000'
RS422
Max. 4000'
RS422
Max. 4000'
RS422
Max. 4000'
RS422
Max. 4000'
RS232
Max. 50'
niterm
Mii
marterm
Sm
m
C
CICP1100 Single Door Intelligent Controller
Continental Instrument’s Controllers can connect to the
CardAccess Server via hardwire (shown below), LAN/WAN
dial-up modem or fiber optics. See the CIC Configuration
Guide for additional detailed system information.
Microterm Components
QTY.
Part No.
Description
1
CICP1100
Stand-alone single- or two-door controller
with standard 1,400 card capacity, 2 alarm
inputs, tamper alarm, 3 relay outputs and
printer output. Unit ships complete in a steel
enclosure.
1
Standard
12VDC Wallmount Power Supply included.
1
Standard
15-conductor wiring Harness included.
1 Optional
CICP1100BAT-2
CICP1100BAT-2 Battery Standby - Input
120VAC, Output 12VDC to temporary power
the Microterm only in the event of a power
failure.
Typical Door Configuration
See Continental Instruments Configuration Guide for
additional detailed system wiring information.
A431A