NAPCO CICP1400UL Datasheet - page 2
A standard on-board power supply provides 800mA @5VDC
or 500mA@12VDC for reader power. An additional 3A
@12VDC is available with the optional expanded power
supply. The Superterm can be ordered with a factory installed
expanded power supply. The expanded power supply can also
be ordered separately and field installed within the Superterm
enclosure. The expanded power supply includes a 12AH
standby battery, an upgrade to the standard 7AH battery.
The standard 7AH and expanded 12AH batteries provide 4-6
hours standby. In addition to the rechargeable standby battery,
each Superterm includes a lithium battery for up to one year of
data protection.
The Superterm-4 is UL Listed for UL294 (Access Control
System Unit), UL1076 (Proprietary Burglar Alarm Unit) and
UL1950** (Information Technology Equipment).
Typical Door Configuration
See Continental Instruments Configuration Guide for
additional detailed system wiring information.
Continental Instruments, A Napco Security Group Company
•
355 Bayview Ave., Amityville, NY 11701
(631) 842-9400
•
FAX (631) 842-9135 www.cicaccess.com GSA GS-07F-00039H
CardAccess® and CI SQL 3000™ are trademarks of Continental/NAPCO. © Continental Instruments/NAPCO, 2003.
Door Contact
Electric
Door Strike
Door Lock
Power Supply
RS422 to Panels
Continental
Instruments llc
Request to Exit
Motion Detector
Door Contact
Card Reader
Request
to Exit
Bu
Door Lock
A or B
G
D
G
G
G
Request
to Exit
G
H
G
NOTE: Request to Exit motion detectors will require
an additional 12VDC power cable. Exit devices are
typically mounted on the egress side of door.
CardAccess 3000
Database and
Communications
Server
CICE1940PL-1
Polling Line Converter
RS232 to RS422
Required if server is not located
within 50
RS422 Repeat Mode Communications Network
4000' max. distance between controllers.
Up to 63 controllers on a Repeat Mode Network.
perterm
Sup
p
perterm
Sup
p
RS422
x. 4000'
RS422
Max. 4000'
RS422
Max. 4000'
RS422
Max. 4000'
RS422
Max. 4000'
RS232
Max. 50'
niterm
Mii
marterm
Sm
m
C
CICP1400UL Four Door Intelligent Controller
Continental Instrument’s Controllers can connect to the
CardAccess Server via hardwire (shown below), LAN/WAN
dial-up modem or fiber optics. See the CIC Configuration
Guide for additional detailed system information.
Superterm-4 Components
QTY.
Part No.
Description
1
CICP1400UL
or
CICP1400ULEXP
Four (4) reader controller with stan-
dard 20,000 card capacity, 16 super-
vised alarm inputs, tamper alarm, and
9 relay outputs. Unit ships complete
in a locked steel enclosure including a
7AH standby battery for memory and
system operation.
Same as above, with expanded power
supply. Required if more than one Re-
lay Expander Board (CICP1800RB) is
used or additional 12VDC is needed. A
12AH Battery is included.
1
Standard
14VAC Power Supply via step-
down transformer mounted inside
enclosure. 10’ power line cable with
110VAC plug is included.
1
Standard
7 AH Battery Backup included.
1 Optional CICEXPPWS
12V Linear Expanded Power
Supply provides 3A @ 12VDC
Auxiliary Power. 12AH Battery is
included.
1 Optional CICP1800MB2-1
Memory Board - 2MB (up to 145,000
cardholders).
Up to 3
Optional*
CICP1800RB
Relay Expander Board - 16 output
relays, 8 alarm inputs (Unsupervised).
Up to 3
Optional*
CICP1800AB
Alarm Expander Board - 16 alarm
inputs (Supervised). UL Listed.
Note: *A maximum of 3 Expansion Boards in any combination may be added to the Superterm
enclosure.
A458