1 operating guide for your napco freedom home security system © napco 2006 oi318a 9/06 r freedom f-64tp touchpad afreedom_f-64tp_oi318a.0... Page 1 friday, september 15, 2006 09:33 composite.
2 the napco freedom f-64tp is a “smart” interac- tive menu-driven touchpad with an integral motion sensor, integral siren, and integral speaker designed for your napco control panel. It is designed for ease of use and to eliminate false alarms by using the exit door deadbolt for arming and disarming...
3 t ab l e o f c o n t e n t s table of contents f-64tp touchpad controls & indicators .................4 system disarmed ..............................................................6 arming when leaving ......................................................7 arming stay: protecting yourself at ho...
4 system ready 10/15/06 12:05p bypass fire fire tbl sys tbl f - 6 4 t p t o u c h p ad c o n t r o l s & i n d i c at o r s 20 2 3 4 5 6 19 21 22 7 13 17 9 8 4 12 10 11 16 15 14 18 1 afreedom_f-64tp_oi318a.0... Page 4 friday, september 15, 2006 09:33 composite.
5 f - 6 4 t p t o u c h p ad c o n t r o l s & i n d i c at o r s lcd window – 32 character lcd displays system status messages, zone descriptions, system troubles, etc. Status light. Lights (green) to indicate that the system is ready for arming. If a zone is not secured, the light will be off and ...
6 s y s t e m d i s ar m e d please note the following information when the system is disarmed: when the system is disarmed, the premises is not protected from intruders--but the keypad alarm buttons fire, aux, and police are always active (as are any other "24 hour" devices that the installer provi...
7 ar m i n g w h e n l e av i n g 1 check the touchpad indicators. The green status light must be on-steady, and the lcd window will read "system ready", indicating that the system is ready to arm. • if the green status light is off and zones are scrolling in the display, a perimeter zone is faulted...
8 ar m i n g s t ay : p r o t e c t i n g y o u r s e l f at h o m e arming in the stay mode allows you to remain home with the perimeter protection active but with the interior protection off, so that you may move freely within the premises. 1 check the touchpad indicators. The green status light m...
9 ar m i n g an d l e av i n g w i t h o t h e r s s t ay i n g 1 check the touchpad indicators. The green status light must be on-steady, and the lcd win- dow will read "system ready", indicating that the system is ready to arm. • if the green status light is off and zones are scrolling in the disp...
10 e x i t i n g w i t h t h e s y s t e m al r e ad y ar m e d with the system armed in stay mode, the touchpad will read "armed stay". The lcd window will read "exit and lock door to arm-stay" during the exit delay time period. 2 unlock the deadbolt from the inside. 3 open the door, exit and close...
11 e x i t i n g w i t h t h e s y s t e m al r e ad y ar m e d 1 press the away button. The touchpad will voice prompt the correct action. • if you change your mind after pressing away, press reset to clear arming. The lcd window will read "exit and lock door to arm-away". 2 unlock the deadbolt fro...
12 b y p as s i n g z o n e s ( o v e r v i e w ) you want to arm the system, but a zone cannot be secured, or you wish to intentionally leave a perimeter door open. These "faulted" or open zone(s), may be temporarily removed from the system or "bypassed". Warning: bypassed zones are unpro- tected--...
13 ar m i n g an d l e av i n g w i t h a f au l t e d z o n e you want to arm and leave the premises, but wish to intentionally leave a window open. Or perhaps a door deadbolt is bro- ken and is unable to be quickly repaired and locked. These "faulted" zone(s), may be temporarily removed from the s...
14 ar m i n g an d s t ay i n g w i t h a f au l t e d z o n e perhaps you want to arm the system and stay within the premises, but wish to intentionally leave a door open with all other perimeter protection secure. These open "faulted" zone(s), may be temporarily removed from the system ("bypassed"...
15 b y p as s i n g u s i n g t h e z o n e d i r e c t o r y bypassing using the zone directory allows you to scroll through a list of all zones in your system and manually select which zone to bypass. These "faulted" zone(s), may be temporarily removed from the system ("bypassed"). Warning: bypass...
16 e m e r g e n c y b u t t o n s emergency buttons (only available if programmed). Fire emergency hold down the fire button to alert the central station of a fire emer- gency. * (fire emergency programmed? yes no) auxiliary emergency hold down this button to alert the central station of an auxil...
17 d i s ar m i n g t h e s y s t e m disarming when returning home: when returning home, simply unlocking your deadbolt from the outside will automatically disarm the sys- tem. The red armed light will go out and, if there are no previously bypassed perimeter open zones, the green status light will...
18 if an alarm occurs while you are at home: the touchpad siren will sound and the red armed light will flash. The lcd window will read "alarm". Proceed with caution! If you suspect that an intruder may still be in the premises, leave immediately and call authorities from a neighbor's telephone. The...
19 if a fire is detected, the siren will sound a distinct pulsating tone and the lcd window will flash the word fire. If a fire alarm does occur: 1 if a fire is in progress, evacuate the premises immediately! Call the fire department from an outside phone. 2 if there is no evidence of a fire, press ...
20 f i r e p r o t e c t i o n preparing a fire escape plan even with the most advanced fire alarm system, adequate protection requires an escape plan. To prepare your plan, draw floor plans of your building. Show two ex- its - a front or back door and a window from each room. (make sure the win- do...
21 t o u c h p ad m e n u m o d e the touchpad can provide access to a wide assortment of utility functions, each displayed on the touchpad lcd window in a prompting “yes/no” format. 1 to enter touchpad menu mode, press menu. 2 to skip a function, press no. 3 to select and execute a function, answer...
22 continue to chime when system is armed. Change keypad beep volume - when the touchpad buttons are pressed or when an entry warning activates, the touchpad beeper sounds. This function allows the touchpad beeper volume to be adjusted. Press yes to increase, press no to de- crease. Selections are h...
23 activate fault find y/n reset system tbl y/n activate fault find - activates a multiple diagnostic test report. For installer's use only. If accidentally enabled, press reset to exit. Note: this selection only appears with a master i-fob inserted in the touchpad. Reset system tbl - system trouble...
24 activate download y/n activate download - for installer's use only. If accidentally enabled, press reset to exit. Note: this feature is disabled while armed. Note: this selection only appears with a master i-fob inserted in the touchpad. Activate lost key mode - in the event that the keys to your...
25 u s e r p r o g r am m o d e user program mode your installer has programmed into your system a uniquely coded digital master i-fob that can be used to not only disarm the system and silence the siren, but also allows access to the user program mode. User program mode allows you to program variou...
26 2. Repeat this process to increment (or decrement) the minute as needed. Press enter move the cursor to the right and press the yes or no buttons to toggle between "a" and "p" (for am and pm). When finished, press menu to save and proceed to the next op- tion, "enroll master i-fob y/n". Create ma...
27 2. With “create user i-fob y/n” displayed in the lcd window, press "y" and the lcd window will request to insert the new i-fob into the touchpad. 3. After 5 seconds, the i-fob will be programmed, and you will be prompted to remove the i-fob from the touchpad. It is recommended that you record the...
28 u s e r i - f o b l i s t • the space below is for recording the names of those in possession of user i-fob's in your system. If an i-fob is lost, be sure to delete its i-fob number from the system (using the procedure on the previous page) as soon as possible. I-fob number area name u __ __ u __...
29 s y s t e m t r o u b l e e r r o r c o d e s your control panel is capable of detecting a variety of troubles that may affect system performance. In the unlikely event that a problem should occur, the sys tbl (system trouble) icon will display on the left side of lcd window along with one or mor...
30 s y s t e m t r o u b l e e r r o r c o d e s trouble indication system trouble condition action e04-nn wireless transmitter supervisory failure a problem has been detected with a wireless transmitter. Call installing company for service e05-nn wireless transmitter low battery the battery in a wi...
31 s y s t e m t r o u b l e e r r o r c o d e s trouble indication system trouble condition action e10-nn touchpad response failure call installing company for service. E11-nn touchpad tamper a touchpad has been removed from the wall. Call installing company for service if problem cannot be repaire...
32 s y s t e m t r o u b l e e r r o r c o d e s trouble indication system trouble condition action e19-00 user program memory error call installing company for service. E20-00 dealer program memory error call installing company for service. E21-00 system shutdown call installing company for service...
33 s y s t e m t r o u b l e e r r o r c o d e s trouble indication system trouble condition action e40-00 rf self test failure a wireless motion sensor on the zone indicated has failed its automatic self test routine. Call installing company for service. E41-nn fire trouble a problem has been detec...
34 • the space below is for recording the descriptions of the zones in your system. • if the system has a faulted zone, the zone description will appear on the lcd window. Refer to the list below to see which zone is open and secure it (close the door or window, etc.). Zone 1 zone 2 zone 3 zone 4 zo...
35 federal communications commission (fcc) part 68 statement this equipment complies with part 68 of the fcc rules. On the front cover of this equipment is a label that contains, among other information, the fcc registration number and ringer equivalence number (ren) for this equipment. If requested...
36 warning! The limitations of this alarm system while this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variet...
37 warning! The limitations of this alarm system (continued) • even if the system responds to the emergency as intended, however, occupants may have insufficient time to protect them- selves from the situation. In the case of a monitored alarm system, authorities may not respond appropriately. • thi...
38 napco limited warranty napco security systems, inc. (napco) warrants its products to be free from manufacturing defects in materials and work- manship for thirty-six months following the date of manufacture. Napco will, within said period, at its option, repair or replace any product failing to o...
39 ten, are either merged herein or are expressly cancelled. Napco neither assumes, nor authorizes any other person purporting to act on its behalf to modify, to change, or to assume for it, any other warranty or liability concerning its products. In no event shall napco be liable for an amount in e...
40 the following statement is required by the fcc radio and television interference this equipment has been tested and found to comply with the limits for a class-b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interf...
41 notes afreedom_f-64tp_oi318a.0... Page 41 friday, september 15, 2006 09:33 composite.
42 notes afreedom_f-64tp_oi318a.0... Page 42 friday, september 15, 2006 09:33 composite.
43 notes afreedom_f-64tp_oi318a.0... Page 43 friday, september 15, 2006 09:33 composite.
44 333 bayview avenue amityville, new york 11701 for sales and repairs, (800) 645-9445 for technical service, (800) 645-9440 publicly traded on nasdaq symbol: nssc www.Napcosecurity.Com r afreedom_f-64tp_oi318a.0... Page 44 friday, september 15, 2006 09:33 composite.