NAPCO QuickModem Installation Instructions
R
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, (800) 645-9445
For Technical Service, (800) 645-9440
Publicly traded on NASDAQ Symbol: NSSC
© NAPCO 2005
Quick-Modem
INSTALLATION INSTRUCTIONS
GENERAL DESCRIPTION
The NAPCO Quick-Modem is a modem which is
fully compatible with the NAPCO Quickloader
PCD3000, PCD2000 and PCD-Windows Quick-
loader V4.54 (or higher) downloader programs.
SPECIFICATIONS
Input Power: 9 VAC, 750-1000mA, 9.8 W (from
supplied AC adapter).
CONNECTION
Connect the Quick-Modem to the J2 connector of
the PCI2000 Interface module using a standard
modem cable (not supplied).
CONFIGURATION
PCD3000, PCD2000 and PCD-Windows Quick-
loader software must be configured as follows for
use with the Quick-Modem:
PCD3000
From the PCD main screen (teal screen with the
large NAPCO logo):
Press S for Setup
Press M for Modem Setup
Select the StarComm 2400 Data (model
2400E-030) modem
Modem type (Select StarComm 2400 Data
(model 2400E-030) )
port none COM1 COM2 COM3 COM4
(select the Comm port for Quick-Modem)
physical type external internal
carrier detect slow fast
call monitor none connect always
(select preference)
speaker volume 1 2 3 4
(select preference)
Telephone line:
dialing mode rotary TouchTone
dialtone type nonstandard standard
telephone number
dial-out prefix
•
Press [ESC]
•
Press X for EXit
The settings will be checked for errors. If none are
found, a message will display:
[Local Configuration values changed]
Save changes?
•
Press [Y] to accept the changes and exit
Setup.
PCD2000
Go to the DOS directory in which PCD2000 is
installed cd\PCD2000 (or the directory name in
which PCD2000 is installed).
•
Type SETUP
•
Select option A Basic Setup
PCI Module installed? Yes No
WI1066C 5/05
For Technical Assistance, Contact the NAPCO
Toll Free Helpline
(800) 645-9440
NAPCO Security Systems, Inc.
333 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs, call Toll Free: (800) 645-9445