Napoleon SRPH02-XXXX Owner's Manual

Other manuals for SRPH02-XXXX: Owner's Manual
Manual is about: Deluxe Outdoor Patio Heater

Summary of SRPH02-XXXX

  • Page 1

    Model # srph02-xxxx patio heater questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-537-8484, 8 a.M. - 8 p.M., est or saturday 9:30 a.M - 6:00 p.M. E-mail: ps@frontgate.Com. If you smell gas: 1. Shut off gas to the appliance. 2. Extin...

  • Page 2: Danger

    2 this appliance can produce carbon monoxide which has no odor. Using it in an enclosed space can kill you. Never use this appliance in an enclosed space such as a camper, tent or home. Danger carbon monoxide hazard warning: improper installation, adjustment, alteration, services or maintenance can ...

  • Page 3: Precautions

    3 precautions the installation must conform with local codes or, in the absence of local codes, with the national fuel gas code, ansi z223.1/nfpa 54, nfpa58 natural gas and propane installation code, csa b149.1, or propane storage and handling code, b149.2 the heater, when installed, must be electri...

  • Page 4: Precautions

    4 precautions within a partial enclosure which includes an overhead cover and three side walls, as long as 30 percent or more of the horizontal periphery of the enclosure is permanently open. This appliance requires 9kg(20lb) lp-gas supply cylinder. The lp-gas supply cylinder to be used must be: con...

  • Page 5: Precautions

    5 precautions precautions precautions precautions warnings and cautions this heater is designed to operate with a standard 20 ib propane cylinder with approved cylinder connection. Note: please read the following safety rules: adjustable opening wrench philips screwdriver estimated time for assembly...

  • Page 6: Package Content

    6 package content part description quantity a b c d e f g 1 pc 1 pc 1 pc 1 pc 1 pc 1 set 1 pc 1 pc part description quantity h fixing chain decorative cap regulator & gas hose reflector head assembly pole gas cylinder cover pole support ff hh ee b ii gg c bb aa d e f g a h cc dd.

  • Page 7: Hardware Contents

    7 hardware contents part description quantity picture m4x8 screw 5 pcs 4 mm washer 5 pcs m5x8 screw 6 pcs 5 mm washer 6 pcs 6 mm washer 6 pcs m6 nut 5 pcs m6x70 double sided bolt 3 pcs m6x55 double sided bolt 1 pc decorative nut 1 pc aa bb cc dd ee ff gg hh ii.

  • Page 8

    F f f f.

  • Page 9

    D attach the head assembly (c) to the pole (d) by inserting regulator & gas hose (a) through it, secure it with m4 x 8 screw (aa) and 4mm washer (bb). Sided sided bolt.

  • Page 10: Assembly Instructions

    10 step 6: assembly instructions ee 6 mm washer x3 ff m6 nut x3 fig. 6 ff ee b c hardware used attach the reflector (b) to the m6 x 70 double sided bolt (gg) with m6 nut (ff) and 6mm washer (ee). Fig. 6 step 5: fig. 5 insert m6 x 55 double sided bolt (hh) through the central hole of the reflector (b...

  • Page 11: Assembly Instructions

    11 assembly instructions step 7: fig. 7 attach the decorative cap (h) to the reflector (b) with decorative nut (ii). Fig. 7 b h ii tighten the pole support (f) as indicated. And fix it with fixing chain (g). Fig.8. Place cylinder inside the pole support (f) g step 8: fig. 8 attach the regulator to t...

  • Page 12

    12 connections at the factory for leakage. To check the connection at the gas hose/regulator/cylinder. Loosen and there is still a leak, please call customer service: 1-800-537-8484.

  • Page 13: Operation

    13 operation before turning gas supply on warning: do not attempt to operate heater until you have read and understand all precautions. Before lighting heater should be thoroughly inspected before each use, and by a qualified service person at least annually. If relighting a hot heater, always wait ...

  • Page 14: Operation

    14 operation yellow tip emitter screen ignition hole primarily blue flame 4) once the pilot is lit, continue to keep the control knob depressed for at least 30 seconds, after 30 seconds release control knob. 5) if pilot does not stay lit, repeat steps 3 and 4. 6) if pilot still does not stay lit, th...

  • Page 15: Operation

    15 operation note: the burner may be noisy when initially turned on. To eliminate excessive noise from the burner, turn the control knob to the "low" position. Then, turn the knob to the level of heater desired. When heater is on: emitter screen will become bright red due to intense heat. The color ...

  • Page 16: Locating Header For Use

    16 locating header for use figure 1 caution: when certain materials or items are left, above, beside or under this heater while in use, they will be subject to radiant heat and could be seriously damaged. This heater is primarily used for the heating of outdoor patios, decks, spas, pools and open wo...

  • Page 17

    17.

  • Page 18

    18.

  • Page 19

    19 please contact one of our product specialists for assembly assistance or questions at 1-800-537-8484 or email: ps@frontgate.Com specialists are available weekdays 8:00 am to 8:00 est or saturdays 9:30 am to 6:00 pm..

  • Page 20

    20 srph02-xxxx color material & base p o l e & w h e e l s reflector reflector 1. 1pc reflector 2. 2pcs reflector 3. 3pcs slidable reflector 4. 3pcs reflector 5. 5pcs kd reflector pole & w h eels 1. 1pc pole w/o wheels 2. 1pc pole w/ wheels 3. 2pcs pole w/o wheels 4. 2pcs pole w/ wheels material & b...