Napoli Audio NPL-9073 Instruction Manual - page 8
Portable DVD Player
●
Operating the Player
★
Turning the player On and Off
Once the battery is fully charged or the player is attached to a power outlet with the power adapter, turn the
player on by sliding the POWER switch on the side of the player to the appropriate position. Once startup, it
will access the DVD startup screen. Power LED lamp flickers on startup, and no flickering when power off;
★
Adjusting the Volume
Press the volume key on the remote or button on the panel to set the appropriate volume for speaker and
headphones.
★
Using Earphone
To listen to the audio with earphone plug it into the earphone jack on the right side of the player. The
speakers will mute when headphone is plugged in.
★
DVD Mode Play
1. Press the DVD/TV/AV button on the panel or MODE key on the remote to switch to the DVD mode.
2. Press the OPEN button to open the receptacle.
3. Snap the disc onto the spindle in the center.
4. Close the receptacle cover, the player will begin to play the disc automatically.
Note: Remove the laser head protective shield for the first time use.
For more detail setting, please refer to “DVD Setup Menu”
★
ISDB Mode Play
1. Press the DVD/TV/AV button on the panel or MODE key on the remote to switch to the ISDB mode.
2. Insert the antenna (included in your package) or cable TV into ANT port.
3. Press the SETUP button on the panel or SETUP key on the remote, select the item Channel Scan, press
OK key to search the ISDB program automatically.
For more detail setting, please refer to “ISDB Setup Menu”
★
AV IN Mode Play
1. Press the DVD/TV/AV button on the panel or MODE key on the remote to switch to the AV mode.
2. Insert A/V Connector (included in your package) into the AV IN port.
3. Connect the lines by referring to the following diagram, and you may use the product as AV display after
input the video/audio.
Video (YELLOW)
Left Audio
Right Audio
Video Input
Audio Input
Unit (AV IN port) AV Signal Source
Note:
1: Because the AV IN port and the AV OUT port are the some ports. Please pull out this A/V Connector
7