Natec MOUSE LYNX User Manual - page 10
10
2.
Install batteries with the positive (+) & negative (-) in the correct direction
indicated by the battery compartment label.
3.
Replace battery compartment cover. The red LED on the bottom of the mouse,
will indicate power to the mouse
Note: The ON/OFF sliding-switch on the mouse bottom must be put on the “ON”
position.
Step 2. Connecting the Mouse to the available Bluetooth-enabled PC or Laptop
There requires a one-time connection between the mouse and
the available Bluetooth-
enabled PC or Laptop.
Please follow the steps below to finish the connection:
1.
Before you can install your Lynx Bluetooth mouse, please make sure you have
done the Bluetooth dongle installation procedure.
2.
Press and release the “CONNECT” button on the bottom of the Bluetooth mouse.
The red light led under the wheel button will be turn on.
3.
On your computer system, double click the
Bluetooth icon, and select the
advanced configuration program.
4.
Follow the indication of the advanced configuration program to setup the HID
Bluetooth mouse driver.
Your mouse now is ready to be used.
Connect Button
Link Indicator