National Geographic NG60AZ Instructions And Owner's Manual - page 4
4
ASSEMBLY
1) Carefully remove all parts from the cardboard cartons and lay them on a table or
on the floor in order to take an inventory of all the pieces. Keep your box for storage
or in case you ever need to ship your telescope.
2) Extend the legs, and lock each one at the desired height with the supplied tripod
adjustment knob (See Fig. 1).
(Fig. 1)
3) Connect all three tripod legs to the yoke with the supplied tripod leg attachment
bolts, washers, and wing nuts (See Fig. 2).
(Fig. 2)
4) Fasten the tripod support bracket to each leg using the included bolts and nuts that
come attached to the end of each arm of the tripod support bracket. Remove each
bolt and nut (See Fig. 3). Then position one arm of the tripod support bracket so that
Azimuth Locking Knob