Watch collection ng741 series instruction manual.
Alarm hand 12 hr second hand minute hand push button b: sets the 24 hr hand date window day indicator 24 hr time zone hour hand main parts and indicators pushbutton a: alarm on-off a) setting the time - pull the crown out to the second position. - turn the crown to set the hour and minute hands. - p...
B) setting the day - pull the crown out to the second position. - turn the crown to advance or rewind 24 hours from the day being changed. For example, if the current day is tuesday and the correct day is wednesday, advance the time 24 hours until the day indicator changes to the correct day. - push...
E) second time zone - press button "b" and hold down for two seconds to enable the second time zone set mode. - press button "b" continuously until the second time zone is set. - three seconds after setting the second time zone, the mode will be set back to normal. Enter (2 sec) setting off (after 3...
F) power reserve calibration to be used only after battery exchange or watch mishandling. - pull out the crown to the first position. - press button "a" repeatedly until the power reserve indicator is set to 0 percent. - push the crown back to the original position. Watch specifications movement cal...
© 2008 national geographic society. National geographic and yellow border design are trademarks of the national geographic society. All rights reserved..
