National Geographic NGDRONE2G Instruction Manual

Manual is about: QUADCOPTER

Page of 12

Download

Print this page

Bookmark us

Ages 14 +

QUADCOPTER DRONE

STOP: READ THESE INSTRUCTIONS BEFORE FLYING!

Before operating your drone, read the ENTIRE user manual to become

familiar with the features of this product. Failure to operate the product

correctly can result in damage to the product or personal property and cause serious injury. This

is a sophisticated product that must be operated with caution and common sense and requires

some basic mechanical ability. This product is not intended for use by children without direct adult

supervision. DO NOT use with incompatible components or alter this product in any way outside of

the documents provided by JMW SALES, INC. These Safety Guidelines contain instructions for safety,

operation, and maintenance. It is essential to read and follow all of the instructions and warnings

in the Quadcopter Drone user manual, prior to assembly, setup, or use, in order to operate the

product correctly and avoid damage or serious injury.

INSTRUCTION MANUAL

Before you take off, learn how to fly responsibly. Drone registration for this National Geographic Quadcopter Drone is

not required as of June, 2016. Please check website for the most current rules and regulations:

http://knowbeforeyoufly.org/

KNOW BEFORE YOU FLY

KNOW BEFORE YOU FLY

WARNING

1 2 3 4 5 6 7 Next › »

Summary of NGDRONE2G

Page 1
Ages 14 + quadcopter drone stop: read these instructions before flying! Before operating your drone, read the entire user manual to become familiar with the features of this product. Failure to operate the product correctly can result in damage to the product or personal property and cause serious i...
Page 2: Safety Precautions
Follow these safety precautions when operating this drone. Adult supervision required. Do not turn on the drone unless controller has been turned on first. Turn off controller and drone when not in use. Do not touch the spinning blades or fly over another person’s head. Do not submerge in water. Thi...
Page 3: Battery Charging
Do not put the loose cells in a pocket, bag, or drawer where they may short-circuit against other items or where the battery terminals could be pressed against each other. Never disassemble or modify pack wiring in any way or puncture cells. Always keep a supply of sand accessible when charging. Dum...
Page 4: Controller Battery Info
Battery installation and removal should be performed by an adult. Use only batteries recommended in this instruction manual. Be careful to install the batteries with the correct polarity as indicated. Do not mix old and new batteries. Remove all batteries when replacing. Do not mix alkaline, standar...
Page 5
Remove the battery cover on the back of the remote control and install 4 x aa batteries (not included). Make sure to follow the diagram on the inside of the battery compartment to ensure that batteries are installed in the correct direction. Replace the battery cover on the remote. Installing batter...
Page 6: Battery Removal
Plug the micro-usb end of the usb charging cable directly into the battery charging port on the side of the drone. Then insert the usb end of the charging cable into a usb power source (i.E. Cell phone adapter). Step 4 the power button will illuminate a red color indicating the drone is charging. Wh...
Page 7
To sync the drone start by standing directly behind the drone. Turn on the remote control by pushing the power button. The lights on the bottom of the drone will briefly flash, indicating the remote control is on and ready to sync. The synced light on the remote control will also flash, confirming i...
Page 8: Drone Operational Features
To turn the power off on the remote control, hold down the power button for approximately 1 second. The remote control has a built-in safety feature that requires the power button to be held down to power off. The remote control lights will turn off, indicating power has been deactivated. Step 7 pus...
Page 9: Trim
The trim feature helps align the drone during flight and counter any drift, i.E. If it “pulls” in one direction when the controller is in the centered position. Each time you put in the battery the balance of the drone may be slightly affected by the exact battery position. Therefore it might need t...
Page 10: Speed Switches
Pressing the return to home button on the top left of the remote control will instruct the quadcopter drone to immediately return back to your current position. E note: it will not stop when it gets to you, so be prepared to maneuver the drone safely as it returns to your position. Battery installat...
Page 11: Troubleshooting
Battery installation and charging troubleshooting problem reason solution the quadcopter lights are flashing but it is not responsive to the remote control. 1. The sync between the remote and the drone is not complete. 1. Try re-syncing the remote to the drone. You may need to move closer to properl...
Page 12: Fcc Warning Message
Fcc warning message fcc radiation exposure statement any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with fcc radiation exposure limits set forth for an uncontrolled environm...