1. DL manuals
  2. National Instruments
  3. Adapter
  4. DAQ SC-205X Series
  5. User Manual

National Instruments DAQ SC-205X Series User Manual - Sc-2053 Connection

Summary of DAQ SC-205X Series

  • Page 1

    Daq sc-205 x series user manual sc-205 x series user manual november 1998 edition part number 3 71176a -01.

  • Page 2

    Internet support e-mail: support@natinst.Com ftp site: ftp.Natinst.Com web address: http://www.Natinst.Com bulletin board support bbs united states: 512 794 5422 bbs united kingdom: 01635 551422 bbs france: 01 48 65 15 59 fax-on-demand support 512 418 1111 telephone support (usa) tel: 512 795 8248 f...

  • Page 3: Important Information

    Important information warranty the sc-205x series boards are warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National instruments will, at its option, repair or replace equipment that proves t...

  • Page 4: Contents

    © national instruments corporation v sc-205x series user manual contents about this manual organization of this manual .........................................................................................Xi conventions used in this manual.............................................................

  • Page 5

    Contents sc-205x series user manual vi © national instruments corporation chapter 5 sc-2053 sc-2053 connection ..................................................................................................... 5-3 connectors ...........................................................................

  • Page 6

    Contents © national instruments corporation vii sc-205x series user manual chapter 10 installation and operation hardware installation.....................................................................................................10-1 rack mounting .................................................

  • Page 7

    Contents sc-205x series user manual viii © national instruments corporation figure 4-4. Pin assignments for sc-2052 i/o connector j3 .................................. 4-6 figure 4-5. Pin assignments for sc-2052 i/o connector j4 .................................. 4-6 figure 4-6. Pin assignments for ...

  • Page 8

    Contents © national instruments corporation ix sc-205x series user manual figure 8-14. Pin assignments for sc-2056 i/o connector j12.................................8-16 figure 8-15. Pin assignments for sc-2056 i/o connector j13.................................8-16 figure 9-1. Sc-2057 parts locator ...

  • Page 9

    Contents sc-205x series user manual x © national instruments corporation table 9-1. Sc-2057 connectors ............................................................................. 9-9 table 9-2. Scxi-1348 pin translations ................................................................. 9-15.

  • Page 10: About This Manual

    © national instruments corporation xi sc-205x series user manual about this manual this manual describes the mechanical and electrical aspects of the sc-205x series adapters and contains information about installing and operating the adapters. Organization of this manual the sc-205x series user manu...

  • Page 11

    About this manual sc-205x series user manual xii © national instruments corporation • appendix b, customer communication , contains forms you can use to request help from national instruments or to comment on our products. • the glossary contains an alphabetical list and description of terms in this...

  • Page 12

    About this manual © national instruments corporation xiii sc-205x series user manual sc-205x refers to the sc-2050, sc-2051, sc-2052, sc-2053, sc-2054, sc-2055, sc-2056, and sc-2057 adapters. National instruments documentation the sc-205x series user manual is one piece of the documentation set for ...

  • Page 13: Related Documentation

    About this manual sc-205x series user manual xiv © national instruments corporation related documentation the following documentation from national instruments contains information that may be helpful as you read this manual: • sc-2042-rtd user manual • sc-2043-sg user manual • sc-206x series user m...

  • Page 14: Introduction

    © national instruments corporation 1-1 sc-205x series user manual 1 introduction this chapter introduces the sc-205x series adapters; describes the sc-2050, sc-2051, sc-2052, sc-2053, sc-2054, sc-2055, sc-2056, and sc-2057 kits; describes the optional equipment, signal conditioning accessories, and ...

  • Page 15

    Chapte r 1 introduc tion sc-205x series user manual 1-2 © national instruments corporation table 1-1. Daq hardware used with the sc-205 x series adapters daq hardware family sc-2050 sc-2051 sc-2052 sc-2053 sc-2054 sc-2055 sc-2056 sc-2057 e series at-mio-16e-10 at-mio-16de-10 at-mio-16e-2 at-mio-16e-...

  • Page 16: What You Need to Get Started

    Chapter 1 introduction © national instruments corporation 1-3 sc-205x series user manual the sc-205x series adapters link the national instruments daq devices and the signal conditioning accessories. You can configure any usual combination of signal conditioners (for example, solid-state relays, opt...

  • Page 17: Unpacking

    Chapter 1 introduction sc-205x series user manual 1-4 © national instruments corporation ❑ your daq device ❑ your computer detailed specifications for the sc-205x series adapters are in appendix a, specifications . Unpacking your sc-205x adapter is shipped in an antistatic package to prevent electro...

  • Page 18: Sc-2050

    © national instruments corporation 2-1 sc-205x series user manual 2 sc-2050 this chapter describes the sc-2050 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2050 converts e series conn...

  • Page 19

    Chapter 2 sc-2050 sc-205x series user manual 2-2 © national instruments corporation figure 2-1 shows the sc-2050 parts locator diagram. Figure 2-1. Sc-2050 parts locator diagram 1 product name, assembly number, revision letter, and serial number 2 shield jumper 3 to e series device (mio-16, etc.) 4 ...

  • Page 20: Sc-2050 Connection

    Chapter 2 sc-2050 © national instruments corporation 2-3 sc-205x series user manual sc-2050 connection connect your sc-2050 to the daq device via an sh6850 cable or pshr68-50 cable (for daqcards). Connect the sc-2050 to the 100-pin at-mio-16de-10 and pci-6071e via a 100-pin r1005050 cable, available...

  • Page 21

    Chapter 2 sc-2050 sc-205x series user manual 2-4 © national instruments corporation figure 2-2. Sc-2050 connections table 2-1 describes the connectors on the sc-2050. Table 2-1. Sc-2050 connectors connectors connection description j1, j2 50-pin male ribbon cable connectors; e series connection attac...

  • Page 22

    Chapter 2 sc-2050 © national instruments corporation 2-5 sc-205x series user manual figures 2-3 through 2-6 show the pin assignments for each i/o connector on the sc-2050. Figure 2-3. Pin assignments for sc-2050 i/o connectors j1 and j2 gpctr0_out pfi8/gpctr0_source pfi6/wftrig gpctr1_out pfi3/gpctr...

  • Page 23

    Chapter 2 sc-2050 sc-205x series user manual 2-6 © national instruments corporation figure 2-4. Pin assignments for sc-2050 analog input connector j3 figure 2-5. Pin assignments for sc-2050 analog i/o connector j4 aisense ach7 aignd ach6 ach5 aignd ach4 ach3 aignd ach2 ach1 aignd ach0 nc aignd ach15...

  • Page 24: Mounting

    Chapter 2 sc-2050 © national instruments corporation 2-7 sc-205x series user manual figure 2-6. Pin assignments for sc-2050 digital i/o connector j5 mounting the sc-2050 adapter is equipped with metal standoffs so it can sit on a workbench close to the host computer. A rack-mount chassis is also ava...

  • Page 25: Sc-2051

    © national instruments corporation 3-1 sc-205x series user manual 3 sc-2051 this chapter describes the sc-2051 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2051 converts 24 digital i/...

  • Page 26

    Chapter 3 sc-2051 sc-205x series user manual 3-2 © national instruments corporation figure 3-1 shows the sc-2051 parts locator diagram. Figure 3-1. Sc-2051 parts locator diagram 1 product name, assembly number, revision letter, and serial number 2 shield jumper 3 to daq device 4 to cb-50 5 to sc-206...

  • Page 27: Sc-2051 Connection

    Chapter 3 sc-2051 © national instruments corporation 3-3 sc-205x series user manual sc-2051 connection connect your sc-2051 to a 50-pin daq board via a type nb1, 50-pin ribbon cable. To connect the sc-2051 to the at-mio-16d or at-mio-16de-10, you will need a type nb5 cable; use a pr50-50f cable for ...

  • Page 28

    Chapter 3 sc-2051 sc-205x series user manual 3-4 © national instruments corporation figure 3-2 illustrates the connections between the sc-2051 and the necessary accessories and devices. Figure 3-2. Sc-2051 connections table 3-1 describes the connectors on the sc-2051. Table 3-1. Sc-2051 connectors c...

  • Page 29

    Chapter 3 sc-2051 © national instruments corporation 3-5 sc-205x series user manual figures 3-3 through 3-6 show the pin assignments for each i/o connector on the sc-2051. Figure 3-3. Pin assignments for sc-2051 i/o connectors j1 and j2 +5 v pa0 pa1 pa2 pa3 pa4 pa5 pa6 pa7 pb0 pb1 pb2 pb3 pb4 pb5 pb...

  • Page 30

    Chapter 3 sc-2051 sc-205x series user manual 3-6 © national instruments corporation figure 3-4. Pin assignments for sc-2051 i/o connector j3 figure 3-5. Pin assignments for sc-2051 i/o connector j4 +5 v pc0 pc1 pc2 pc3 pc4 pc5 pc6 pc7 +5 v +5 v +5 v +5 v gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd g...

  • Page 31: Mounting

    Chapter 3 sc-2051 © national instruments corporation 3-7 sc-205x series user manual figure 3-6. Pin assignments for sc-2051 i/o connector j5 mounting the sc-2051 adapter is equipped with metal standoffs so it can sit on a workbench close to the host computer. A rack-mount is also available and can b...

  • Page 32: Sc-2052

    © national instruments corporation 4-1 sc-205x series user manual 4 sc-2052 this chapter describes the sc-2052 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2052 converts 32 digital i/...

  • Page 33

    Chapter 4 sc-2052 sc-205x series user manual 4-2 © national instruments corporation figure 4-1 shows the sc-2052 parts locator diagram. Figure 4-1. Sc-2052 parts locator diagram 1 product name, assembly number, revision letter, and serial number 2 shield jumper 3 to dio-32 and 6533 devices 4 to cb-5...

  • Page 34: Sc-2052 Connection

    Chapter 4 sc-2052 © national instruments corporation 4-3 sc-205x series user manual sc-2052 connection connect your sc-2052 to the daq device via an r6850-d1 or a type nb1, 50-pin ribbon cable (for the at-dio-32f). Make this connection with the host computer powered off. Connect one end of the ribbo...

  • Page 35

    Chapter 4 sc-2052 sc-205x series user manual 4-4 © national instruments corporation figure 4-2. Sc-2052 connections table 4-1 describes the connectors on the sc-2052. Table 4-1. Sc-2052 connectors connectors connection description j1, j2 50-pin male connectors; dio-32, 6533 connection attach j1 or j...

  • Page 36

    Chapter 4 sc-2052 © national instruments corporation 4-5 sc-205x series user manual figures 4-3 through 4-7 show the pin assignments for each i/o connector on the sc-2052. Figure 4-3. Pin assignments for sc-2052 i/o connectors j1 and j2 diob4 diob0 diob7 diob5 dioa7 dioa1 dioa0 dioa4 req1 pclk1 (out...

  • Page 37

    Chapter 4 sc-2052 sc-205x series user manual 4-6 © national instruments corporation figure 4-4. Pin assignments for sc-2052 i/o connector j3 figure 4-5. Pin assignments for sc-2052 i/o connector j4 nc diod0 diod1 diod2 diod3 diod4 diod5 diod6 diod7 nc nc nc nc gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd...

  • Page 38: Mounting

    Chapter 4 sc-2052 © national instruments corporation 4-7 sc-205x series user manual figure 4-6. Pin assignments for sc-2052 i/o connector j5 figure 4-7. Pin assignments for sc-2052 i/o connector j6 mounting the sc-2052 adapter is equipped with metal standoffs so it can sit on a workbench close to th...

  • Page 39: Cabling

    Chapter 4 sc-2052 sc-205x series user manual 4-8 © national instruments corporation cabling you need an r6850-d1 ribbon cable to connect the sc-2052 to a 68-pin daq device. Connections to the sc-206x series boards require a 26-pin ribbon cable. A 26-conductor ribbon cable is needed for the 8-channel...

  • Page 40: Sc-2053

    © national instruments corporation 5-1 sc-205x series user manual 5 sc-2053 this chapter describes the sc-2053 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2053 converts the lab/1200 ...

  • Page 41

    Chapter 5 sc-2053 sc-205x series user manual 5-2 © national instruments corporation figure 5-1 shows the sc-2053 parts locator diagram. Figure 5-1. Sc-2053 parts locator diagram 1 product name, assembly number, revision letter, and serial number 2 shield jumper 3 to lab-nb, lab-pc, or 1200 device 4 ...

  • Page 42: Sc-2053 Connection

    Chapter 5 sc-2053 © national instruments corporation 5-3 sc-205x series user manual sc-2053 connection connect your sc-2053 to the daq device via a type nb1, 50-pin ribbon cable. Make this connection with the host computer powered off. Connect one end of the ribbon cable to the sc-2053 at either con...

  • Page 43

    Chapter 5 sc-2053 sc-205x series user manual 5-4 © national instruments corporation figure 5-2. Sc-2053 connections table 5-1 describes the connectors on the sc-2053. Table 5-1. Sc-2053 connectors connectors connection description j1, j2 50-pin male connectors; lab/1200 connection attach j1 or j2 to...

  • Page 44

    Chapter 5 sc-2053 © national instruments corporation 5-5 sc-205x series user manual figures 5-3 through 5-7 show the pin assignments for each i/o connector on the sc-2053. Figure 5-3. Pin assignments for sc-2053 i/0 connectors j1 and j2 +5 v gat2 clk1 out1 out0 extupdate pc7 pc5 pc3 pc1 pb7 pb5 pb3 ...

  • Page 45

    Chapter 5 sc-2053 sc-205x series user manual 5-6 © national instruments corporation figure 5-4. Pin assignments for sc-2053 i/o connector j3 figure 5-5. Pin assignments for sc-2053 i/o connector j4 aisense ach7 aognd ach6 ach5 aognd ach4 ach3 aignd ach2 ach1 aognd ach0 nc aognd nc nc aognd nc nc aog...

  • Page 46: Mounting

    Chapter 5 sc-2053 © national instruments corporation 5-7 sc-205x series user manual figure 5-6. Pin assignments for sc-2053 i/o connector j5 figure 5-7. Pin assignments for sc-2053 i/o connector j6 mounting the sc-2053 adapter is equipped with metal standoffs so it can sit on a workbench close to th...

  • Page 47: Cabling

    Chapter 5 sc-2053 sc-205x series user manual 5-8 © national instruments corporation cabling you need a 50-pin ribbon cable to connect the sc-2053. Connections to the sc-206x series boards and 5b series backplane require a 26-pin ribbon cable. A 26-conductor ribbon cable is needed for the 8-channel s...

  • Page 48: Sc-2054

    © national instruments corporation 6-1 sc-205x series user manual 6 sc-2054 this chapter describes the sc-2054 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2054 converts half of the 9...

  • Page 49: Sc-2054 Connection

    Chapter 6 sc-2054 sc-205x series user manual 6-2 © national instruments corporation figure 6-1 shows the sc-2054 parts locator diagram. Figure 6-1. Sc-2054 parts locator diagram sc-2054 connection your sc-2054 is connected to the 96-channel daq device via a type nb5, 100-pin ribbon cable or r1005050...

  • Page 50

    Chapter 6 sc-2054 © national instruments corporation 6-3 sc-205x series user manual connect your sc-2054 to the signal conditioning accessories via a type nb7, 26-pin ribbon cable. This cable connects the sc-2054 to any of the sc-206x series boards. An 8-channel ssr series backplane with a 26-conduc...

  • Page 51

    Chapter 6 sc-2054 sc-205x series user manual 6-4 © national instruments corporation figure 6-2. Sc-2054 connections table 6-1 describes the connectors on the sc-2054. Table 6-1. Sc-2054 connectors connectors connection description j1, j2 50-pin male connectors attach j1 or j2 to the daq device via a...

  • Page 52

    Chapter 6 sc-2054 © national instruments corporation 6-5 sc-205x series user manual j4, j8 26-pin male connectors port c digital i/o connection. J4 is tied to port c of ppi a or c (port number 2 or 8), depending on which half of the type nb5 cable is attached to j1. J8 is tied to port c of ppi b or ...

  • Page 53

    Chapter 6 sc-2054 sc-205x series user manual 6-6 © national instruments corporation figures 6-3 through 6-7 show the pin assignments for each i/o connector on the sc-2054. Figure 6-3. Pin assignments for sc-2054 i/o connectors j1 and j2 a. Type nb5 or r1005050 cable connector labeled pins 1-50 is at...

  • Page 54

    Chapter 6 sc-2054 © national instruments corporation 6-7 sc-205x series user manual figure 6-4. Pin assignments for sc-2054 i/o connectors j3 and j7 +5 v pa0 pa1 pa2 pa3 pa4 pa5 pa6 pa7 pb0 pb1 pb2 pb3 pb4 pb5 pb6 pb7 pc0 pc1 pc2 pc3 pc4 pc5 pc6 pc7 gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gnd gn...

  • Page 55

    Chapter 6 sc-2054 sc-205x series user manual 6-8 © national instruments corporation figure 6-5. Pin assignments for sc-2054 i/o connectors j4 and j8 figure 6-6. Pin assignments for sc-2054 i/o connectors j5 and j9 +5 v pc0 pc1 pc2 pc3 pc4 pc5 pc6 pc7 +5 v +5 v +5 v +5 v gnd gnd gnd gnd gnd gnd gnd g...

  • Page 56: Mounting

    Chapter 6 sc-2054 © national instruments corporation 6-9 sc-205x series user manual figure 6-7. Pin assignments for sc-2054 i/o connectors j6 and j10 mounting the sc-2054 adapter has metal standoffs so it can sit on a workbench close to the host computer. A rack-mount is also available and can be fi...

  • Page 57: Sc-2055

    © national instruments corporation 7-1 sc-205x series user manual 7 sc-2055 this chapter describes the sc-2055 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2055 converts the daqcard-7...

  • Page 58: Sc-2055 Connection

    Chapter 7 sc-2055 sc-205x series user manual 7-2 © national instruments corporation sc-2055 connection connect your sc-2055 to the daq device via a type nb1, 50-pin ribbon cable. Make this connection with the host computer powered off. Connect one end of the ribbon cable to the sc-2055 at either con...

  • Page 59

    Chapter 7 sc-2055 © national instruments corporation 7-3 sc-205x series user manual figure 7-2. Sc-2055 connections table 7-1 describes the connectors on the sc-2055. Table 7-1. Sc-2055 connectors connectors connection description j1, j2 50-pin male ribbon cable connectors; daqcard-700 or pc-lpm-16/...

  • Page 60

    Chapter 7 sc-2055 sc-205x series user manual 7-4 © national instruments corporation caution if you are using a pc-lpm-16/pnp, do not use 5b series analog output modules in the last two slots of the 5b backplane connected to the connector because the ±12 vdc supply is routed to those slots. Doing so ...

  • Page 61

    Chapter 7 sc-2055 © national instruments corporation 7-5 sc-205x series user manual figure 7-4. Pin assignments for sc-2055 analog input connector j3 figure 7-5. Pin assignments for sc-2055 analog i/o connector j4 aignd ach7 aignd ach6 ach5 aignd ach4 ach3 aignd ach2 ach1 aignd ach0 nc aignd ach15 a...

  • Page 62: Mounting

    Chapter 7 sc-2055 sc-205x series user manual 7-6 © national instruments corporation figure 7-6. Pin assignments for sc-2055 digital input connector j5 figure 7-7. Pin assignments for sc-2055 digital output connector j6 mounting the sc-2055 adapter has metal standoffs so it can sit on a workbench clo...

  • Page 63: Cabling

    Chapter 7 sc-2055 © national instruments corporation 7-7 sc-205x series user manual cabling you need a 50-pin ribbon cable to connect the sc-2055. Connections to the sc-206x series boards and 5b backplanes require a 26-pin ribbon cable. A 26-conductor ribbon cable is needed for the 8-channel ssr bac...

  • Page 64: Sc-2056

    © national instruments corporation 8-1 sc-205x series user manual 8 sc-2056 this chapter describes the sc-2056 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2056 converts 64-channel e ...

  • Page 65: Sc-2056 Connection

    Chapter 8 sc-2056 sc-205x series user manual 8-2 © national instruments corporation figure 8-1. Sc-2056 parts locator diagram sc-2056 connection connect your sc-2056 to the daq device via an sh100100, r1005050, or sh96-100 cable, available separately. Make this connection with the host computer or v...

  • Page 66

    Chapter 8 sc-2056 © national instruments corporation 8-3 sc-205x series user manual to connect your sc-2056 to the signal conditioning accessories, use a type nb7, 26-pin ribbon cable. This cable connects the sc-2056 to any of the sc-206x series boards or to the 5b series backplane. An 8-channel ssr...

  • Page 67

    Chapter 8 sc-2056 sc-205x series user manual 8-4 © national instruments corporation figure 8-2 illustrates the connections between the sc-2056 and the necessary accessories and devices. Figure 8-2. Sc-2056 connections note when using an sc-2040 or sc-2043, you must apply external power to the sc-204...

  • Page 68

    Chapter 8 sc-2056 © national instruments corporation 8-5 sc-205x series user manual table 8-1 describes the connectors on the sc-2056. Table 8-1. Sc-2056 connectors connectors connection description j1 100-pin female ribbon cable shielded connector; daq device connection attach j1 to the daq device ...

  • Page 69

    Chapter 8 sc-2056 sc-205x series user manual 8-6 © national instruments corporation j9 26-pin male ribbon cable connector; 5b series analog input connection; channels 48–63 attach j9 to the 5b series backplane. This connection takes analog input channels 48–63 on the daq device to channels 0–15 of t...

  • Page 70

    Chapter 8 sc-2056 © national instruments corporation 8-7 sc-205x series user manual figures 8-3 through 8-15 show the pin assignments for each i/o connector on the sc-2056. Figure 8-3. Pin assignments for sc-2056 i/o connector j1 50 100 49 99 48 98 47 97 46 96 45 95 44 94 43 93 42 92 41 91 40 90 39 ...

  • Page 71

    Chapter 8 sc-2056 sc-205x series user manual 8-8 © national instruments corporation figure 8-4. Pin assignments for sc-2056 i/o connector j2 gpctr0out pfi8/gpctr0source pfi6/wftrig gpctr1out pfi3/gpctr1source pfi1/trig2 exstrobe* +5 v dgnd dio3 dio2 dio1 dio0 aognd dac1out aisense ach7 ach6 ach5 ach...

  • Page 72

    Chapter 8 sc-2056 © national instruments corporation 8-9 sc-205x series user manual figure 8-5. Pin assignments for sc-2056 i/o connector j3 ach55 ach54 ach53 ach52 ach51 ach50 ach49 ach48 ach39 ach38 ach37 ach36 aisense2 ach35 ach34 ach33 ach32 ach23 ach22 ach21 ach20 ach19 ach18 ach17 ach16 ach63 ...

  • Page 73

    Chapter 8 sc-2056 sc-205x series user manual 8-10 © national instruments corporation figure 8-6. Pin assignments for sc-2056 i/o connector j4 gpctr0out pfi8/gpctr0source pfi6/wftrig gpctr1out pfi3/gpctr1source pfi1/trig2 exstrobe* +5 v diggnd dio3 dio2 dio1 dio0 aognd dac1out aisense ach7 ach6 ach5 ...

  • Page 74

    Chapter 8 sc-2056 © national instruments corporation 8-11 sc-205x series user manual figure 8-7. Pin assignments for sc-2056 i/o connector j5 gpctr0out pfi8/gpctr0source pfi6/wftrig gpctr1out pfi3/gpctr1source pfi1/trig2 exstrobe* +5 v dgnd dio3 dio2 dio1 dio0 aognd dac1out aisense ach23 ach22 ach21...

  • Page 75

    Chapter 8 sc-2056 sc-205x series user manual 8-12 © national instruments corporation figure 8-8. Pin assignments for sc-2056 i/o connector j6 gpctr0out pfi8/gpctr0source pfi6/wftrig gpctr1out pfi3/gpctr1source pfi1/trig2 exstrobe* +5 v diggnd dio3 dio2 dio1 dio0 aognd dac1out aisense ach39 ach38 ach...

  • Page 76

    Chapter 8 sc-2056 © national instruments corporation 8-13 sc-205x series user manual figure 8-9. Pin assignments for sc-2056 i/o connector j7 gpctr0out pfi8/gpctr0source pfi6/wftrig gpctr1out pfi3/gpctr1source pfi1/trig2 exstrobe* +5 v diggnd dio3 dio2 dio1 dio0 aognd dac1out aisense ach55 ach54 ach...

  • Page 77

    Chapter 8 sc-2056 sc-205x series user manual 8-14 © national instruments corporation figure 8-10. Pin assignments for sc-2056 i/o connector j8 figure 8-11. Pin assignments for sc-2056 i/o connector j9 +5 v dio0 dio1 dio2 dio3 dio4 dio5 dio6 dio7 +5 v +5 v +5 v +5 v dgnd dgnd dgnd dgnd dgnd dgnd dgnd...

  • Page 78

    Chapter 8 sc-2056 © national instruments corporation 8-15 sc-205x series user manual figure 8-12. Pin assignments for sc-2056 i/o connector j10 figure 8-13. Pin assignments for sc-2056 i/o connector j11 aisense2 ach39 aignd ach38 ach37 aignd ach36 ach35 aignd ach34 ach33 aignd ach32 nc aignd ach47 a...

  • Page 79: Mounting

    Chapter 8 sc-2056 sc-205x series user manual 8-16 © national instruments corporation figure 8-14. Pin assignments for sc-2056 i/o connector j12 figure 8-15. Pin assignments for sc-2056 i/o connector j13 mounting the sc-2056 adapter is equipped with metal standoffs so it can sit on a workbench close ...

  • Page 80: Cabling

    Chapter 8 sc-2056 © national instruments corporation 8-17 sc-205x series user manual cabling you need an r1005050 ribbon cable, sh100100 shielded cable, or sh96-100 shielded cable to connect to the sc-2056. Connections to the sc-206x series boards and 5b backplane require a 26-pin ribbon cable. A 26...

  • Page 81: Sc-2057

    © national instruments corporation 9-1 sc-205x series user manual 9 sc-2057 this chapter describes the sc-2057 adapter in detail, including function, connection, mounting, and cabling. Refer to chapter 10, installation and operation to install and use your adapter. The sc-2057 converts vxi-dio-128 i...

  • Page 82: Sc-2057 Connection

    Chapter 9 sc-2057 sc-205x series user manual 9-2 © national instruments corporation figure 9-1. Sc-2057 parts locator diagram sc-2057 connection connect the sc-2057 to the vxi-dio-128 via a sh96-96, available separately. Make this connection with the vxi-dio-128 powered off. Connect one end of the s...

  • Page 83

    Chapter 9 sc-2057 © national instruments corporation 9-3 sc-205x series user manual if the sc-2057 is connected to the vxi-dio-128 connector labeled input, the accessories connected to the sc-2057 will need to supply only digital inputs. If the sc-2057 is connected to the vxi-dio-128 connector label...

  • Page 84

    Chapter 9 sc-2057 sc-205x series user manual 9-4 © national instruments corporation if the sh96-96 is connected to the vxi-dio-128 connector labeled input, the sc-2057 will provide access to ports 0–7. If the sh96-96 cable is connected to the vxi-dio-128 connector labeled output, the sc-2057 will pr...

  • Page 85

    Chapter 9 sc-2057 © national instruments corporation 9-5 sc-205x series user manual figure 9-3. Output connections with the er-16 the vxi-dio-128 can power a maximum of 16 er channels. The vxi-dio-128 supplies +5 v to these er channels via the +5 v connectors (j5 or j6). Set the power source switch ...

  • Page 86

    Chapter 9 sc-2057 sc-205x series user manual 9-6 © national instruments corporation figure 9-5. Output connections with the sc-2061/2, er-8, or 8-channel ssr backplane * the vxi-dio-128 supplies 1 a of current. If the combination of boards or ssr modules attached to the sc-2052 adapters require more...

  • Page 87

    Chapter 9 sc-2057 © national instruments corporation 9-7 sc-205x series user manual figures 9-6 through 9-8 illustrate the input connections of the signal conditioning accessories to the vxi-dio-128 and sc-2057 and the necessary cables and accessories. Figure 9-6. Input connections with the scxi-116...

  • Page 88

    Chapter 9 sc-2057 sc-205x series user manual 9-8 © national instruments corporation figure 9-8. Input connections with sc-2060 and 8-channel ssr backplane the vxi-dio-128 can supply 1 a of current. If the combination of boards or ssr modules attached to the sc-2052 boards require more than 1 a, use ...

  • Page 89

    Chapter 9 sc-2057 © national instruments corporation 9-9 sc-205x series user manual table 9-1 describes the connectors on the sc-2057. Table 9-1. Sc-2057 connectors connectors connection description p1 96-pin male din connector; vxi-dio-128 connection attach p1 or p2 to vxi-dio-128. P2 96-pin male d...

  • Page 90

    Chapter 9 sc-2057 sc-205x series user manual 9-10 © national instruments corporation figures 9-9 through 9-11 show the pin assignments for each i/o connector on the sc-2057. Figure 9-9. Pin assignments for sc-2057 i/o connector p1 and p2 port 7/15_line5 port 7/15_line2 port 6/14_line7 port 6/14_line...

  • Page 91

    Chapter 9 sc-2057 © national instruments corporation 9-11 sc-205x series user manual figure 9-10. Pin assignments for sc-2057 i/o connector j1 port 1/9_line4 port 1/9_line0 port 1/9_line7 port 0/9_line5 port 0/8_line7 port 0/8_line1 port 0/8_line0 port 0/8_line4 nc nc nc nc gnd gnd gnd gnd gnd port ...

  • Page 92: Mounting

    Chapter 9 sc-2057 sc-205x series user manual 9-12 © national instruments corporation figure 9-11. Pin assignments for sc-2057 i/o connector j2 mounting the sc-2057 adapter is equipped with metal standoffs so it can sit on a workbench close to the host computer. A rack-mount chassis is also available...

  • Page 93: Cabling

    Chapter 9 sc-2057 © national instruments corporation 9-13 sc-205x series user manual cabling you need an sh96-96 shielded cable to connect to the sc-2057. Connections to the signal conditioning accessories require an nb1 50-pin ribbon cable. In addition to an nb1 cable, you will need an scxi-1348 ca...

  • Page 94

    Chapter 9 sc-2057 sc-205x series user manual 9-14 © national instruments corporation perform the following steps to install the scxi-1348 cable adapter: 1. Turn off the power to the vxi chassis and the scxi chassis. 2. Install your scxi module in the scxi chassis, following the instructions in your ...

  • Page 95

    Chapter 9 sc-2057 © national instruments corporation 9-15 sc-205x series user manual table 9-2 explains the way the scxi-1348 translates pins from the sc-2057 to the scxi module. Table 9-2. Scxi-1348 pin translations sc-2057 connector pin sc-2057 signal name module connector pin 1 2 3 4 5 6 7 8 9 10...

  • Page 96: Installation and Operation

    © national instruments corporation 10-1 sc-205x series user manual 10 installation and operation this chapter describes the installation and operation of your sc-205x adapter, including configuration and cable connections. Hardware installation the following are general instructions for installing y...

  • Page 97

    Chapter 10 installation and operation sc-205x series user manual 10-2 © national instruments corporation the acrylic plastic cover can be used with sc-2057 in a single-height rack-mount kit (not the double-height rack-mount kit) because it allows access through the top and bottom of the kit. Figure ...

  • Page 98

    Chapter 10 installation and operation © national instruments corporation 10-3 sc-205x series user manual shield selection the sc-2050, sc-2051, sc-2052, sc-2053, sc-2054, and sc-2055 adapters have one jumper, w1, shown in figure 10-3, for an optional connection from the board ground to the rack-moun...

  • Page 99

    Chapter 10 installation and operation sc-205x series user manual 10-4 © national instruments corporation sc-2056 the sc-2056 has one jumper, w1, shown in figure 10-5. Jumper w1 connects the shield of the sh100100 cable to the mounting rack or the digital ground of the at-mio-64e-3 to the mounting ra...

  • Page 100

    Chapter 10 installation and operation © national instruments corporation 10-5 sc-205x series user manual sc-2057 the sc-2057 has one jumper, w1, shown in figure 10-5. Jumper w1 connects the shield of the sh96-96 cable to the mounting rack or the digital ground of the vxi-dio-128 to the mounting rack...

  • Page 101: Cable Connections

    Chapter 10 installation and operation sc-205x series user manual 10-6 © national instruments corporation figure 10-8. Ground settings for sc-2057 jumper w1 signal conditioning accessory installation consult the signal conditioning accessory user manual for instructions on accessory installation. The...

  • Page 102

    Chapter 10 installation and operation © national instruments corporation 10-7 sc-205x series user manual on the sc-2056, j1 connector has the same pin assignment as the daq device. Connectors j2 and j3 are used with the r1005050 cable to connect the sc-2056 to the daq device. On the sc-2057 the pin ...

  • Page 103: Specifications

    © national instruments corporation a-1 sc-205x series user manual a specifications this appendix lists the specifications for the sc-205x series adapters. These specifications are typical at 25° cunless otherwise noted. Physical dimensions (including standoffs) sc-2050, sc-2051, sc-2052, sc-2053, sc...

  • Page 104: Customer Communication

    © national instruments corporation b-1 sc-205x series user manual b customer communication for your convenience, this appendix contains forms to help you gather the information necessary to help us solve your technical problems and a form you can use to comment on the product documentation. When you...

  • Page 105

    Sc-205x series user manual b-2 © national instruments corporation fax-on-demand support fax-on-demand is a 24-hour information retrieval system containing a library of documents on a wide range of technical information. You can access fax-on-demand from a touch-tone telephone at 512 418 1111. E-mail...

  • Page 106: Technical Support Form

    Technical support form photocopy this form and update it each time you make changes to your software or hardware, and use the completed copy of this form as a reference for your current configuration. Completing this form accurately before contacting national instruments for technical support helps ...

  • Page 107: Sc-205

    Sc-205 x series hardware and software configuration form record the settings and revisions of your hardware and software on the line to the right of each item. Complete a new copy of this form each time you revise your software or hardware configuration, and use this form as a reference for your cur...

  • Page 108: Documentation Comment Form

    Documentation comment form national instruments encourages you to comment on the documentation supplied with our products. This information helps us provide quality products to meet your needs. Title: sc-205x series user manual edition date: november 1998 part number: 371176a-01 please comment on th...

  • Page 109: Glossary

    © national instruments corporation g-1 sc-205x series user manual glossary prefix meanings value p- pico 10 –12 n- nano- 10 –9 µ- micro- 10 – 6 m- milli- 10 –3 k- kilo- 10 3 m- mega- 10 6 g- giga- 10 9 t- tera- 10 12 numbers/symbols ° degrees Ω ohms / per % percent ± plus or minus +5 v +5 v signal a...

  • Page 110

    Glossary sc-205x series user manual g-2 © national instruments corporation adc a/d converter agnd analog ground signal aignd analog input ground signal aisense analog input sense signal ao analog output aognd analog output ground signal c c celsius clk# clock signal d d data bit d/a digital-to-analo...

  • Page 111

    Glossary © national instruments corporation g-3 sc-205x series user manual e eisa extended industry standard architecture extconv external convert signal extref external reference signal extstrobe external strobe signal extupdate external update signal f fout frequency output signal g gate# gate sig...

  • Page 112

    Glossary sc-205x series user manual g-4 © national instruments corporation l led light-emitting diode m m meter mb megabytes of memory n nc not connected (signal) o out output signal p pa port a pb port b pc port c ppi programmable peripheral interface ppm parts per million r rms root mean square s ...

  • Page 113

    Glossary © national instruments corporation g-5 sc-205x series user manual scanclk scan clock signal sclk serial clock bit scxi signal conditioning extensions for instrumentation sdk software development kit source# source signal ssr solid-state relay startscan startscan signal stoptrig stop trigger...

  • Page 114: Index

    © national instruments corporation i-1 sc-205x series user manual index b bulletin board support, b-1 c cable connections, 10-6 to 10-7 cabling sc-2050 adapter, 2-7 sc-2051 adapter, 3-7 sc-2052 adapter, 4-8 sc-2053 adapter, 5-8 sc-2054 adapter, 6-9 sc-2055 adapter, 7-7 sc-2056 adapter, 8-17 sc-2057 ...

  • Page 115

    Index sc-205x series user manual i-2 © national instruments corporation m manual. See documentation. Mounting sc-2050 adapter, 2-7 sc-2051 adapter, 3-7 sc-2052 adapter, 4-7 sc-2053 adapter, 5-7 sc-2054 adapter, 6-9 sc-2055 adapter, 7-6 sc-2056 adapter, 8-16 sc-2057 adapter, 9-12 p parts locator diag...

  • Page 116

    Index © national instruments corporation i-3 sc-205x series user manual j1 through j9 connections (table), 4-4 j3 connector pin assignments (figure), 4-6 j4 connector pin assignments (figure), 4-6 j5 connector pin assignments (figure), 4-7 j6 connector pin assignments (figure), 4-7 mounting, 4-7 ove...

  • Page 117

    Index sc-205x series user manual i-4 © national instruments corporation j3 connector pin assignments (figure), 8-9 j4 connector pin assignments (figure), 8-10 j5 connector pin assignments (figure), 8-11 j6 connector pin assignments (figure), 8-12 j7 connector pin assignments (figure), 8-13 j8 connec...

  • Page 118

    Index © national instruments corporation i-5 sc-205x series user manual t technical support, b-1 to b-2 telephone and fax support numbers, b-2.