1. DL manuals
  2. National Instruments
  3. Network Hardware
  4. FBUS-HSE/H1
  5. User Manual

National Instruments FBUS-HSE/H1 User Manual

Manual is about: Linking Device (LD)

Summary of FBUS-HSE/H1

  • Page 1

    Fieldbus fbus-hse/h1 linking device (ld) user manual fbus-hse/h1 ld user manual may 2003 edition part number 370728a-01.

  • Page 2

    Support worldwide technical support and product information ni.Com national instruments corporate headquarters 11500 north mopac expressway austin, texas 78759-3504 usa tel: 512 683 0100 worldwide offices australia 1800 300 800, austria 43 0 662 45 79 90 0, belgium 32 0 2 757 00 20, brazil 55 11 326...

  • Page 3: Important Information

    Important information warranty the fbus-hse/h1 linking device (ld) is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National instruments will, at its option, repair or replace equipment that...

  • Page 4: Compliance

    Compliance fcc/canada radio frequency interference compliance determining fcc class the federal communications commission (fcc) has rules to protect wireless communications from interference. The fcc places digital electronics into two classes. These classes are known as class a (for use in industri...

  • Page 5: Contents

    © national instruments corporation v fbus-hse/h1 ld user manual contents about this manual how to use the manual set..........................................................................................Vii conventions .................................................................................

  • Page 6

    Contents fbus-hse/h1 ld user manual vi ni.Com appendix d technical support and professional services glossary index.

  • Page 7: About This Manual

    © national instruments corporation vii fbus-hse/h1 ld user manual about this manual this manual describes the mechanical and electrical aspects of the fbus-hse/h1 linking device (ld) and contains information concerning its installation and operation. The fbus-hse/h1 ld product is a high speed ethern...

  • Page 8: Related Documentation

    About this manual fbus-hse/h1 ld user manual viii ni.Com programs, subprograms, subroutines, device names, functions, operations, variables, filenames and extensions, and code excerpts. Related documentation the following documents contain information you might find helpful as you read this manual: ...

  • Page 9: Overview of Fbus-Hse/h1

    © national instruments corporation 1-1 fbus-hse/h1 ld user manual 1 overview of fbus-hse/h1 linking device (ld) hardware this chapter provides an overview of the fbus-hse/h1 linking device (ld) hardware. Product overview high speed ethernet (hse) is an extension to the foundation fieldbus specificat...

  • Page 10

    Chapter 1 overview of fbus-hse/h1 linking device (ld) hardware fbus-hse/h1 ld user manual 1-2 ni.Com figure 1-1 shows an fbus-hse/h1 ld connected to an ethernet network. Figure 1-1. Typical ethernet network setup in a distributed application, many fieldbus h1 segments are networked together using hs...

  • Page 11

    Chapter 1 overview of fbus-hse/h1 linking device (ld) hardware © national instruments corporation 1-3 fbus-hse/h1 ld user manual once configured, the linking device permits hmi software on any pc connected to an fbus-hse/h1 ld to access and monitor fieldbus devices as if the hmi were directly connec...

  • Page 12: Hardware Installation and

    © national instruments corporation 2-1 fbus-hse/h1 ld user manual 2 hardware installation and configuration installing the fbus-hse/h1 ld the fbus-hse/h1 ld has a simple rail clip for reliable mounting onto a standard 35 mm din rail. Complete the following steps to mount the fbus-hse/h1 ld on a din ...

  • Page 13

    Chapter 2 hardware installation and configuration fbus-hse/h1 ld user manual 2-2 ni.Com figure 2-2. Mounting the fbus-hse/h1 ld on a din rail 3. Slide the fbus-hse/h1 ld to the desired position along the din rail. After the fbus-hse/h1 ld is in position, lock it to the din rail by pushing the rail c...

  • Page 14

    Chapter 2 hardware installation and configuration © national instruments corporation 2-3 fbus-hse/h1 ld user manual mounting the fbus-hse/h1 ld to a panel complete the following steps to install the optional fieldbus network panel mount accessory and mount the fbus-hse/h1 ld network module to a pane...

  • Page 15

    Chapter 2 hardware installation and configuration fbus-hse/h1 ld user manual 2-4 ni.Com connect your fbus-hse/h1 ld to the network connect the rj-45 ethernet port of the fbus-hse/h1 ld to an ethernet hub using a standard category 5 ethernet cable. You also can connect an fbus-hse/h1 ld directly to a...

  • Page 16: Cabling

    Chapter 2 hardware installation and configuration © national instruments corporation 2-5 fbus-hse/h1 ld user manual cabling if you build your own cables, the following table shows the standard ethernet cable wiring connections for both normal and crossover cables. Figure 2-5 shows the connector pino...

  • Page 17

    Chapter 2 hardware installation and configuration fbus-hse/h1 ld user manual 2-6 ni.Com connect the fbus-hse/h1 ld to the fieldbus network the fbus-hse/h1 ld can be one of up to 32 devices connected to a fieldbus h1 network. The connection is made through one of the two 9-pin male d-sub fieldbus h1 ...

  • Page 18: Power On The Fbus-Hse/h1 Ld

    Chapter 2 hardware installation and configuration © national instruments corporation 2-7 fbus-hse/h1 ld user manual connect power to the fbus-hse/h1 ld each fbus-hse/h1 ld on your network requires an 11-30 vdc power supply. The power connector is a 6-pin screw terminal power connector whose pinout i...

  • Page 19: Resetting The Fbus-Hse/h1 Ld

    © national instruments corporation a-1 fbus-hse/h1 ld user manual a resetting the fbus-hse/h1 ld if the fbus-hse/h1 ld cannot communicate with the network, you can configure the ethernet settings through ni-fbus software. When you configure the device, it attempts to confirm that the new settings ar...

  • Page 20

    Appendix a resetting the fbus-hse/h1 ld fbus-hse/h1 ld user manual a-2 ni.Com figure a-1. Fbus-hse/h1 ld reset switch 3. Looking at the fbus-hse/h1 ld so that the label is upright, as shown in figure a-1, use a pen or a small screwdriver to move the reset switch to the right. 4. Power up the fbus-hs...

  • Page 21: Troubleshooting

    © national instruments corporation b-1 fbus-hse/h1 ld user manual b troubleshooting led indicators hardware the fbus-hse/h1 ld has seven led indicators on the top panel and three leds on the front panel, as shown in figure b-1..

  • Page 22

    Appendix b troubleshooting fbus-hse/h1 ld user manual b-2 ni.Com figure b-1. Leds on the fbus-hse/h1 ld ethernet leds the six ethernet leds are located on the top panel. The green power led is lit while the fbus-hse/h1 ld is powered up. This led indicates that the power supply connected to the fbus-...

  • Page 23

    Appendix b troubleshooting © national instruments corporation b-3 fbus-hse/h1 ld user manual caution do not power down the fbus-hse/h1 ld while the process led is lit. The green process led is lit when you update the nonvolatile flash memory of the fbus-hse/h1 ld. If you want to change network setti...

  • Page 24

    Appendix b troubleshooting fbus-hse/h1 ld user manual b-4 ni.Com module status led the module status led is located on the front of the linking device, between the two fieldbus (h1 network) connectors, as shown in figure b-1. It indicates whether the linking device is powered, configured, and operat...

  • Page 25

    Appendix b troubleshooting © national instruments corporation b-5 fbus-hse/h1 ld user manual standby state indicates the linking device has passed all self tests and is ready to operate. However, it is not functioning because no active ethernet segment is configured. Operational state indicates the ...

  • Page 26: Specifications

    © national instruments corporation c-1 fbus-hse/h1 ld user manual c specifications this appendix describes the specifications of the fbus-hse/h1 ld. Network network interface................................... 10baset and 100basetx ethernet device interface ..................................... Foun...

  • Page 27

    Appendix c specifications fbus-hse/h1 ld user manual c-2 ni.Com safety this product is designed to meet the requirements of the following standards for safety and electrical equipment for measurement, control, and laboratory use: • iec 60950, en 60950 • ul 1950, ul 60950 • can/csa c22.2 no. 60950 no...

  • Page 28: Technical Support and

    © national instruments corporation d-1 fbus-hse/h1 ld user manual d technical support and professional services visit the following sections of the national instruments web site at ni.Com for technical support and professional services: • support—online technical support resources include the follow...

  • Page 29

    Appendix d technical support and professional services fbus-hse/h1 ld user manual d-2 ni.Com • calibration certificate—if your product supports calibration, you can obtain the calibration certificate for your product at ni.Com/calibration . If you searched ni.Com and could not find the answers you n...

  • Page 30: Glossary

    © national instruments corporation g-1 fbus-hse/h1 ld user manual glossary symbol prefix value m milli 10 –3 k kilo 10 3 m mega 10 6 a a amperes. A/d analog-to-digital converter alarm. A notification the ni-fbus communications manager software sends when it detects that a block leaves or returns to ...

  • Page 31

    Glossary fbus-hse/h1 ld user manual g-2 ni.Com boolean logical relational system having two values, each the opposite of the other, such as true and false or zero and one. Bps bits per second. Buffer temporary storage for acquired or generated data. Bus the group of conductors that interconnect indi...

  • Page 32

    Glossary © national instruments corporation g-3 fbus-hse/h1 ld user manual device tag a name you assign to a fieldbus device. Di discrete input. Digital pertaining to data (signals) in the form of discrete (separate/pulse form) integral values. Directory a structure for organizing files into conveni...

  • Page 33

    Glossary fbus-hse/h1 ld user manual g-4 ni.Com fieldbus network address location of a board or device on the fieldbus; thefieldbus node address. Foundation fieldbus specification communications network specification created by the fieldbus foundation. G ground an intentional or accidental conducting...

  • Page 34

    Glossary © national instruments corporation g-5 fbus-hse/h1 ld user manual l las see link active scheduler. Ld linking device. Led light-emitting diode. Link a foundation fieldbus network is made up of devices connected by a serial bus. This serial bus is called a link. Also known as a segment. Link...

  • Page 35

    Glossary fbus-hse/h1 ld user manual g-6 ni.Com node junction or branch point in a circuit. Non-volatile memory memory that does not require electricity to hold data. O object an element of an object dictionary. P parameter one of a set of network-visible values that makes up a function block. Pc per...

  • Page 36

    Glossary © national instruments corporation g-7 fbus-hse/h1 ld user manual sensor a device that responds to a physical stimulus (heat, light, sound, pressure, motion, flow, and so on), and produces a corresponding electrical signal. Server device that receives a message request. Service a service al...

  • Page 37

    Glossary fbus-hse/h1 ld user manual g-8 ni.Com w waveform multiple voltage readings taken at a specific sampling rate..

  • Page 38: Index

    © national instruments corporation i-1 fbus-hse/h1 ld user manual index c cables, 2-5 calibration certificate, d-2 ce compliance, c-2 compatibility information, 1-3 configuration and monitoring, 1-2 connecting to the fieldbus network, 2-6 connector pinout (figure), 2-6 contacting national instrument...

  • Page 39

    Index fbus-hse/h1 ld user manual i-2 ni.Com leds ethernet leds, b-5 ethernet status led flashes and corresponding errors (table), b-4 figure, b-2 h1 network status leds (table), b-5 module status led (table), b-4 troubleshooting, b-1 mounting on a din rail (figure), 2-2 mounting to a panel, 2-3 over...

  • Page 40

    Index © national instruments corporation i-3 fbus-hse/h1 ld user manual l leds ethernet leds, b-2 figure, b-2 h1 network status leds (table), b-5 module status led (table), b-4 on top panel (figure), b-1 power, 2-7 troubleshooting, b-1 m mechanical dimensions, c-1 module status led, b-4 n national i...

  • Page 41

    Index fbus-hse/h1 ld user manual i-4 ni.Com w web professional services, d-1 technical support, d-1 worldwide technical support, d-2.