1. DL manuals
  2. National Instruments
  3. Network Card
  4. FP-2000
  5. User Manual

National Instruments FP-2000 User Manual - Mounting The Fp-20

Summary of FP-2000

  • Page 1

    Fieldpoint tm fp-2000/2010/2015 user manual fp-2000/2010/2015 user manual april 2003 edition part number 370705a-01 note to users the contents of this document that refer to fieldpoint software are not intended for use with fieldpoint software 4.0 or labview 7.0. Refer to the measurement & automatio...

  • Page 2

    Support worldwide technical support and product information ni.Com national instruments corporate headquarters 11500 north mopac expressway austin, texas 78759-3504 usa tel: 512 683 0100 worldwide offices australia 02 612 9672 8846, austria 43 0 662 45 79 90 0, belgium 32 0 2 757 00 20, brazil 55 11...

  • Page 3: Important Information

    Important information warranty the fieldpoint hardware is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National instruments will, at its option, repair or replace equipment that proves to b...

  • Page 4: Conventions

    Conventions the following conventions appear in this manual: » the » symbol leads you through nested menu items and dialog box options to a final action. The sequence file»page setup»options directs you to pull down the file menu, select the page setup item, and select options from the last dialog b...

  • Page 5: Contents

    © national instruments corporation v fp-2000/2010/2015 user manual contents chapter 1 overview of the fp-20 xx network module fp-20 xx hardware overview.........................................................................................1-1 fieldpoint software overview..............................

  • Page 6

    Contents fp-2000/2010/2015 user manual vi ni.Com using the fp-20 xx from host applications................................................................... 3-16 lookout and the fp-20 xx ................................................................................ 3-16 labview vis and the fp-20 ...

  • Page 7

    Contents © national instruments corporation vii fp-2000/2010/2015 user manual embedding applications on the fp-20 xx ......................................................................5-7 command line arguments .............................................................................5-7 using...

  • Page 8: Overview Of The Fp-20

    © national instruments corporation 1-1 fp-2000/2010/2015 user manual 1 overview of the fp-20 xx network module this chapter provides an overview of the fieldpoint fp-20 xx network module and fieldpoint software. Fp-20 xx hardware overview using the fp-20 xx module with labview rt provides an easy-to...

  • Page 9

    Chapter 1 overview of the fp-20xx network module fp-2000/2010/2015 user manual 1-2 ni.Com figure 1-1. Fp-20 xx parts locator diagram a fieldpoint bank consists of one network module, one or more terminal bases, and one or more i/o modules. Each fp-20 xx can support up to nine i/o modules. Each bank ...

  • Page 10

    Chapter 1 overview of the fp-20xx network module © national instruments corporation 1-3 fp-2000/2010/2015 user manual figure 1-2. Fp-20 xx connected to an ethernet network fieldpoint software overview your fieldpoint software includes a configuration utility as well as server and driver software for...

  • Page 11: Fp-20

    Chapter 1 overview of the fp-20xx network module fp-2000/2010/2015 user manual 1-4 ni.Com select download software»drivers and updates»current software versions»fieldpoint explorer , and follow the instructions on that page. Fp-20 xx setup overview the following list is an overview of the steps requ...

  • Page 12: Installing The Hardware

    © national instruments corporation 2-1 fp-2000/2010/2015 user manual 2 installing the hardware and software this chapter explains how to install the fieldpoint hardware and software. What you need to get started to set up and use labview rt with the fp-20 xx , you need the following: ❑ fp-20 xx netw...

  • Page 13

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-2 ni.Com do not substitute parts or modify the fieldpoint product. Use the product only with the modules, accessories, and cables specified in the installation instructions. Always operate the fieldpoint product in a suit...

  • Page 14

    Chapter 2 installing the hardware and software © national instruments corporation 2-3 fp-2000/2010/2015 user manual voltages on a printed wiring board (pwb) on the secondary of an isolation transformer. Examples of installation category i are measurements on circuits not derived from mains and speci...

  • Page 15: Mounting The Fp-20

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-4 ni.Com mounting the fp-20 xx and terminal bases you can mount the fieldpoint system either to a din rail or directly on a panel. Panel mounting is generally the more secure option, but din rail mounting might be more co...

  • Page 16

    Chapter 2 installing the hardware and software © national instruments corporation 2-5 fp-2000/2010/2015 user manual 4. Slide the fp-20 xx to the desired position along the din rail. After it is in position, lock it to the din rail by pushing the rail clip to the locked position, as shown in the foll...

  • Page 17

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-6 ni.Com connecting terminal bases with din rail mounting follow these steps to connect a terminal base to an fp-20 xx network module using din rail mounting. Caution to avoid damaging the fp-20 xx and the terminal bases,...

  • Page 18

    Chapter 2 installing the hardware and software © national instruments corporation 2-7 fp-2000/2010/2015 user manual mounting the fp-20 xx to a panel follow these steps if you choose to install the optional fieldpoint network panel-mount accessory and mount the fp-20 xx network module to a panel. You...

  • Page 19

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-8 ni.Com 5. Mount the fp-20 xx to your panel with the panel-mount accessory, as shown in the following figure. The installation guide that came with the panel-mount accessory includes a template that you can use to drill ...

  • Page 20

    Chapter 2 installing the hardware and software © national instruments corporation 2-9 fp-2000/2010/2015 user manual 4. To add more terminal bases, repeat steps 1 through 3, mating the local bus connectors of each new terminal base to the connector of the last installed base. In most cases a single f...

  • Page 21

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-10 ni.Com 5. Place the protective cover onto the local bus connector of the last terminal base on the bank, as shown in the following figure. Removing the fp-20 xx and terminal bases from the panel to remove an fp-20 xx n...

  • Page 22: Connecting The Fp-20

    Chapter 2 installing the hardware and software © national instruments corporation 2-11 fp-2000/2010/2015 user manual refer to the following figure and follow these steps to connect an i/o module to a terminal base: 1. Position the first module with its alignment slots aligned with the guide rails on...

  • Page 23

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-12 ni.Com the following figure shows the fp-20 xx connected to an ethernet hub. The following figure shows the fp-20 xx connected directly using a crossover cable. The host pc communicates to the fp-20 xx over a standard ...

  • Page 24

    Chapter 2 installing the hardware and software © national instruments corporation 2-13 fp-2000/2010/2015 user manual wiring power to the fieldpoint system each fp-20 xx on your network requires an 11–30 vdc power supply. The fp-20 xx filters and regulates the supplied power and provides power for al...

  • Page 25

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-14 ni.Com for power requirement details. You can power a module by connecting the v and c inputs on its terminal base to a separate power supply, connecting the v and c outputs of a neighboring terminal base or network mo...

  • Page 26: Powering Up The Fp-20

    Chapter 2 installing the hardware and software © national instruments corporation 2-15 fp-2000/2010/2015 user manual the fp-20 xx supplies 9 w of power to the i/o modules. Using certain i/o modules that consume more than 1 w may reduce the total number of i/o modules allowed in the bank to less than...

  • Page 27

    Chapter 2 installing the hardware and software fp-2000/2010/2015 user manual 2-16 ni.Com 3. Insert the fieldpoint software cd into the cd-rom drive on your computer. 4. Follow the onscreen instructions to complete the installation. Note if the setup does not launch automatically, select start»run fr...

  • Page 28: Hardware And Software

    © national instruments corporation 3-1 fp-2000/2010/2015 user manual 3 hardware and software configuration this chapter describes the details of configuring fieldpoint hardware and software, verifying the configuration, and accessing the channels on the fp-20 xx from other software running on the ho...

  • Page 29

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-2 ni.Com resource to this server . The comm resource configuration dialog box appears. 4. To use the fp-20 xx , set the type to ethernet , as shown in the following figure. Each ethernet comm resource represents a single b...

  • Page 30

    Chapter 3 hardware and software configuration © national instruments corporation 3-3 fp-2000/2010/2015 user manual remote system explorer searches for any fp-20 xx or other national instruments ethernet devices on the subnet. The serial number shown corresponds to the serial number of your fp-20 xx ...

  • Page 31

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-4 ni.Com • gateway —the ip address of a device that acts as a gateway server, which is a connection between two networks. • dns address —the ip address of a network device that stores host names and translates them into ip...

  • Page 32

    Chapter 3 hardware and software configuration © national instruments corporation 3-5 fp-2000/2010/2015 user manual 9. Enter an ip address for the time server on the servers tab of the system configuration dialog box, shown in the following figure. The time server is a networked computer that runs th...

  • Page 33

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-6 ni.Com 11. Highlight the module and click select . When the new host name or ip address appears in the comm resource configuration dialog box of fieldpoint explorer, you can proceed to configuring your devices and channe...

  • Page 34

    Chapter 3 hardware and software configuration © national instruments corporation 3-7 fp-2000/2010/2015 user manual 2. After the fieldpoint modules are found, click the + sign next to fp res in the left pane to expand the device hierarchy and display the modules found on the network, as shown in the ...

  • Page 35

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-8 ni.Com 3. To configure the hardware settings of a particular i/o module, right-click the device name and select edit this device . The device configuration dialog box appears, as shown in the following figure. For output...

  • Page 36

    Chapter 3 hardware and software configuration © national instruments corporation 3-9 fp-2000/2010/2015 user manual 4. Click channel configuration to access the channel configuration dialog box. In the following figure, an fp-tc-120 thermocouple module is selected. Note configuration options are modu...

  • Page 37

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-10 ni.Com d. Set attributes for selected channel(s) by selecting the attribute and entering the desired value. E. Send commands to the selected channel(s) by choosing a command and value and clicking send . F. Repeat this ...

  • Page 38: In Remote System Explorer

    Chapter 3 hardware and software configuration © national instruments corporation 3-11 fp-2000/2010/2015 user manual using other features and options in remote system explorer you can access remote system explorer by right-clicking the comm resource in fieldpoint explorer, selecting edit this comm re...

  • Page 39

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-12 ni.Com setting up security for the fp-20 xx you can set network security options to limit host access, and you can lock the settings made in remote system explorer. Configuring network security you can limit host access...

  • Page 40

    Chapter 3 hardware and software configuration © national instruments corporation 3-13 fp-2000/2010/2015 user manual • to add a host machine to the list, enter its ip address in the ip pattern edit box, select the desired access type ( read/write , read only , or deny access ) from the access type li...

  • Page 41

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-14 ni.Com 3. In the locking system configuration dialog box, enter a password to lock or unlock the device. 4. Click ok . If you need to unlock the device configuration and you do not know the password, you must reset the ...

  • Page 42

    Chapter 3 hardware and software configuration © national instruments corporation 3-15 fp-2000/2010/2015 user manual figure 3-1. Using fieldpoint explorer to monitor i/o channels writing to an output channel you can write to output channels of i/o items that you have configured. 1. In the left pane o...

  • Page 43: Using The Fp-20

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-16 ni.Com 4. Enter the value you want to write in the value field and click write to write the value out. The value must be in the range of the channel that you configured in the finding and configuring devices and channel...

  • Page 44

    Chapter 3 hardware and software configuration © national instruments corporation 3-17 fp-2000/2010/2015 user manual modules. Click the ip address or host name of the network module and browse to the desired data. An alternative method is to use the fpoint.Cbx to access the channel data. Labview vis ...

  • Page 45

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-18 ni.Com loop execute only once each time a loop runs, and fp advise vis only complete at their advise rate. If you had more than one fp advise vi in the loop, the loop (and therefore all of the fp advise vis in the loop)...

  • Page 46

    Chapter 3 hardware and software configuration © national instruments corporation 3-19 fp-2000/2010/2015 user manual note fieldpoint cvi interface compatibility modes—the fieldpoint software ships with object ( .Obj ) files to support the different compiler compatibility modes that labwindows/cvi sup...

  • Page 47

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-20 ni.Com item ids is comm resource name\device name\i/o item name where the comm resource name, device name, and i/o item name are the names given in fieldpoint explorer. For example, an item id associated with one of the...

  • Page 48

    Chapter 3 hardware and software configuration © national instruments corporation 3-21 fp-2000/2010/2015 user manual datasocket servers, lookout or labview dsc module applications, and data published by the data publishing vis. Datasocket uses uniform resource locators (urls) to specify absolute path...

  • Page 49

    Chapter 3 hardware and software configuration fp-2000/2010/2015 user manual 3-22 ni.Com datasocket urls for fieldpoint i/o modules the following is an example of a datasocket url that points to a specific channel of a fieldpoint i/o module: lookout:\\130.164.44.8\fp\1ai\01 in this url, lookout is th...

  • Page 50

    Chapter 3 hardware and software configuration © national instruments corporation 3-23 fp-2000/2010/2015 user manual the locator is read as channel 0 (00) of the analog input module in position one (the first position to the right of the network module) on the bank. Note if you are making only one co...

  • Page 51: Feature Set Description

    © national instruments corporation 4-1 fp-2000/2010/2015 user manual 4 feature set description this chapter describes the feature set for the fp-20 xx network module. Guarding against network failures (network watchdog) the network watchdog feature of the fp-20 xx enables you to guard your system ag...

  • Page 52

    Chapter 4 feature set description fp-2000/2010/2015 user manual 4-2 ni.Com 5. In the left pane of fieldpoint explorer, right-click the fp-20 xx , select edit this device , and configure these settings: • clear the factory configuration checkbox. • enable network watchdog for the bank. • enter a netw...

  • Page 53: I/o Modules (Hotpnp)

    Chapter 4 feature set description © national instruments corporation 4-3 fp-2000/2010/2015 user manual configurable power-up method with the configurable power-up state feature, you can define the power-up configuration on a module-by-module basis. You do not need to set any of the channels to the d...

  • Page 54: Led Indicators

    Chapter 4 feature set description fp-2000/2010/2015 user manual 4-4 ni.Com commands sent to a missing module return an error response, but the fp-20 xx stores the commands and applies the effects of these commands if a suitable replacement module is inserted. When a new i/o module is connected in pl...

  • Page 55

    Chapter 4 feature set description © national instruments corporation 4-5 fp-2000/2010/2015 user manual appendix c, troubleshooting , for more information about status led error indications. Link led the green link led is lit when the fp-20 xx is connected to a functioning ethernet segment. Active le...

  • Page 56: Dip Switches

    Chapter 4 feature set description fp-2000/2010/2015 user manual 4-6 ni.Com error indications section of appendix c, troubleshooting , for information about possible reasons. Dip switches the following figure shows the dip switches on the front of the fp-20 xx . Switches 1, 2, 3, 4, and 5 are user-co...

  • Page 57: Serial Port

    Chapter 4 feature set description © national instruments corporation 4-7 fp-2000/2010/2015 user manual safe mode switch the position of the safe mode switch determines whether the fp-20 xx network module starts up in safe mode. If the software or configuration information on the module becomes corru...

  • Page 58

    Chapter 4 feature set description fp-2000/2010/2015 user manual 4-8 ni.Com isolated power connector (channel 9) the fp-20 xx power connector is a 6-pin screw-terminal connector that accommodates both primary and backup power supplies. The fp-20 xx uses the power supply with the higher voltage level,...

  • Page 59: Labview Rt Programming

    © national instruments corporation 5-1 fp-2000/2010/2015 user manual 5 labview rt programming this chapter contains specific information about targeting labview real-time (rt) to the fp-20 xx module, network options for restricting access to your module, embedding labview rt applications on your mod...

  • Page 60

    Chapter 5 labview rt programming fp-2000/2010/2015 user manual 5-2 ni.Com labview rt applications that have any of the unsupported functionality listed above may or may not work as expected on the fp-20 xx . Complete the following steps on the host pc to target labview rt to your fp-20 xx : 1. Start...

  • Page 61: Network Options

    Chapter 5 labview rt programming © national instruments corporation 5-3 fp-2000/2010/2015 user manual targeting labview rt to the host pc when you target labview rt to the host pc, you can use labview rt like labview for windows. Perform the following steps to target labview rt to the host pc: 1. Pe...

  • Page 62

    Chapter 5 labview rt programming fp-2000/2010/2015 user manual 5-4 ni.Com rt target: access use rt target: access options to limit which host pcs can target the rt engine on the fp-20 xx . Complete the following steps to open the rt target: access dialog box: 1. Target labview rt to your fp-20 xx . ...

  • Page 63

    Chapter 5 labview rt programming © national instruments corporation 5-5 fp-2000/2010/2015 user manual permitted access even though the list indicates by the * wildcard that all addresses ending in .Test.Site.Com are denied access. A checkmark next to a list entry denotes that access is permitted, wh...

  • Page 64

    Chapter 5 labview rt programming fp-2000/2010/2015 user manual 5-6 ni.Com or an ip address fail and slow down the system. Place frequently matched entries toward the bottom of the rt target access list to improve system performance. Rt target: miscellaneous use rt target: miscellaneous options to la...

  • Page 65

    Chapter 5 labview rt programming © national instruments corporation 5-7 fp-2000/2010/2015 user manual select launch application at boot-up to launch the application specified in application path when you start up the fp-20 xx . You must first create the application using the application builder befo...

  • Page 66

    Chapter 5 labview rt programming fp-2000/2010/2015 user manual 5-8 ni.Com rt engine applications and/or host pc applications when you start up your host pc. For example, create a shortcut with the following shortcut target: c:\mybuiltapp.Exe -target 127.127.44.108 –quithost to disable the select tar...

  • Page 67

    Chapter 5 labview rt programming © national instruments corporation 5-9 fp-2000/2010/2015 user manual 3. Select tools»build application or shared library (dll) to open the build application or shared library (dll) dialog box, shown in the following figure. 4. Select application (exe) from the build ...

  • Page 68

    Chapter 5 labview rt programming fp-2000/2010/2015 user manual 5-10 ni.Com if you select small target with external file for subvis in the build options pane, you cannot change the llb for other files path because this path is determined from the application path setting in network options . Refer t...

  • Page 69: File Transfer Capability

    Chapter 5 labview rt programming © national instruments corporation 5-11 fp-2000/2010/2015 user manual file transfer capability when running on an fp-20 xx , the rt engine has a file transfer protocol (ftp) server. The ftp server gives you the ability to use any standard ftp utility for transferring...

  • Page 70: Choosing Network Settings

    © national instruments corporation a-1 fp-2000/2010/2015 user manual a choosing network settings this appendix describes how to choose appropriate network settings. Choosing an ip address the way you choose an ip address for your fp-20 xx may depend on whether your network has a system administrator...

  • Page 71

    Appendix a choosing network settings fp-2000/2010/2015 user manual a-2 ni.Com • to determine whether an ip address is already used by another device on the network, select start»run , type ping x.X.X.X where x.X.X.X is the ip address you want to test, and click ok . If ping returns a timeout, the ip...

  • Page 72: Giving Your Fp-20

    Appendix a choosing network settings © national instruments corporation a-3 fp-2000/2010/2015 user manual giving your fp-20 xx a host name follow these steps to give your fp-20 xx a hostname: 1. Right-click the comm resource in fieldpoint explorer, and choose edit this comm resource . 2. Click brows...

  • Page 73: Tcp/ip Settings

    Appendix a choosing network settings fp-2000/2010/2015 user manual a-4 ni.Com viewing and editing the fp-20 xx tcp/ip settings follow these steps to view the tcp/ip settings: 1. In fieldpoint explorer, right-click the comm resource and select edit this comm resource . 2. Click browse to launch remot...

  • Page 74: Resetting The Fp-20

    © national instruments corporation b-1 fp-2000/2010/2015 user manual b resetting the fp-20 xx if the fp-20 xx is not able to communicate with the network, you can manually reset the unit to its factory settings. In this state, you should always be able to browse for the fp-20 xx using remote system ...

  • Page 75: Troubleshooting

    © national instruments corporation c-1 fp-2000/2010/2015 user manual c troubleshooting this appendix gives troubleshooting instructions for the fp-20 xx and fieldpoint software. Software configuration problems error when browsing in comm resource configuration dialog box possible causes and solution...

  • Page 76

    Appendix c troubleshooting fp-2000/2010/2015 user manual c-2 ni.Com • certain network devices, such as switches and routers, may filter out the directed udp broadcast packets which fieldpoint explorer uses to communicate with unconfigured fp-20 xx modules, even if they are on the same subnet as the ...

  • Page 77

    Appendix c troubleshooting © national instruments corporation c-3 fp-2000/2010/2015 user manual • verify that national instruments time service was installed on the computer you have specified as the time server. If time service is installed but is not running, restart it either using the service ma...

  • Page 78

    Appendix c troubleshooting fp-2000/2010/2015 user manual c-4 ni.Com runaway start-up application if a runaway startup application causes the fp-20 xx to become unresponsive, you must power down the fp-20 xx , then reboot it with either the disable vi switch or safe mode switch in the on position. Re...

  • Page 79

    © national instruments corporation d-1 fp-2000/2010/2015 user manual d installing labview rt software viewing information about installed software to view the software installed on your fp-20 xx , right-click the fp-20 xx in remote system explorer and select view installed software . If your fp-20 x...

  • Page 80

    Appendix d installing labview rt software fp-2000/2010/2015 user manual d-2 ni.Com 2. Right-click the fp-20 xx and select install/upgrade software . The install/upgrade software dialog box appears, shown in the following figure. 3. Click install to begin installation of labview rt files. A list of s...

  • Page 81: Specifications

    © national instruments corporation e-1 fp-2000/2010/2015 user manual e specifications network network interface................................... 10baset and 100basetx ethernet compatibility ......................................... Ieee802.3 communication rates ............................. 10 mbp...

  • Page 82

    Appendix e specifications fp-2000/2010/2015 user manual e-2 ni.Com physical characteristics screw-terminal wiring ............................16–26 awg copper conductor wire with 7 mm (0.28 in.) of insulation stripped from the end torque for screw terminals.....................0.5–0.6 n ⋅ m (4.4–5.3...

  • Page 83

    Appendix e specifications © national instruments corporation e-3 fp-2000/2010/2015 user manual (doc) for this product for any additional regulatory compliance information. To obtain the doc for this product, click declaration of conformity at ni.Com/hardref.Nsf/ . Cabling table e-1 shows the standar...

  • Page 84: Technical Support And

    © national instruments corporation f-1 fp-2000/2010/2015 user manual f technical support and professional services visit the following sections of the national instruments web site at ni.Com for technical support and professional services: • support —online technical support resources include the fo...

  • Page 85

    Appendix f technical support and professional services fp-2000/2010/2015 user manual f-2 ni.Com can obtain the doc for your product by visiting ni.Com/hardref.Nsf . • calibration certificate —if your product supports calibration, you can obtain the calibration certificate for your product at ni.Com/...

  • Page 86: Glossary

    © national instruments corporation g-1 fp-2000/2010/2015 user manual glossary symbol prefix value m milli 10 –3 k kilo 10 3 m mega 10 6 % percent. ° degrees. 0x precedes a hexadecimal number. Ω ohms. B bits. B bytes. Bank the combination of one fieldpoint network module and one or more terminal base...

  • Page 87

    Glossary fp-2000/2010/2015 user manual g-2 ni.Com pwm pulse-width modulation. Generation of a pulse waveform with fixed frequency and variable pulse width (duty cycle). Pwm is used to control discrete devices such as dc motors and heaters by varying the pulse width (the ration of on time to off time...

  • Page 88: Index

    © national instruments corporation i-1 fp-2000/2010/2015 user manual index numerics 100 mbps led, 4-5 a a led, 4-5 access permissions, 3-12 active led, 4-5 application builder application settings tab, 5-10 embedding labview vis on the fp-20 xx , 5-8 installer settings tab, 5-10 source files tab, 5-...

  • Page 89

    Index fp-2000/2010/2015 user manual i-2 ni.Com declaration of conformity, f-1 diagnostic resources, f-1 din rail mount. See installation, mounting hardware on din rail dip switches, 4-6 disable vi switch, 4-6 dns address choosing values, a-1 configuring, 3-4 resetting with reset switch, b-1 document...

  • Page 90

    Index © national instruments corporation i-3 fp-2000/2010/2015 user manual downloading configuration, 3-14 embedded applications. See embedded applications on fp-20 xx feature set, 4-1 hardware watchdog, 5-11 host names, a-3 hotpnp (hot plug and play), 4-3 installation connecting to network, 2-11 mo...

  • Page 91

    Index fp-2000/2010/2015 user manual i-4 ni.Com monitoring channels, 3-14 mounting on terminal bases, 2-10 no modules found error, c-3 powering, 2-13, 2-14 removing, 2-11, 4-3 replacing, 4-3 resetting, b-1 saving configuration as power-up state, 3-10 writing to an output channel, 3-15 iak file, 3-14 ...

  • Page 92

    Index © national instruments corporation i-5 fp-2000/2010/2015 user manual launching vis at system startup, 5-6, 5-10 publish data vi, 3-23 runaway startup applications, c-4 serial vis, 3-23 specifying download path, 5-6 specifying target with command line arguments, 5-7 tcp, 3-23 udp vis, 3-23 labw...

  • Page 93

    Index fp-2000/2010/2015 user manual i-6 ni.Com professional services, f-1 programming examples, f-1 r rail clip, 2-4, 2-7 registering computers with lookout, 3-16 with opc, 3-19 remote system explorer features and options, 3-11 locking/unlocking configuration, 3-13 troubleshooting browse errors, c-1...

  • Page 94

    Index © national instruments corporation i-7 fp-2000/2010/2015 user manual time server choosing ip address, a-1 configuring ip address, 3-5 resetting with reset switch, b-1 setting fp-20 xx internal clock, 3-5 timestamp shown in fieldpoint explorer, 3-14 troubleshooting invalid values, c-2 training ...