1. DL manuals
  2. National Instruments
  3. Monitor
  4. FPT-1015
  5. User Manual

National Instruments FPT-1015 User Manual

Manual is about: 15 in. color TFT LCD flat panel monitor for industrial applications

Summary of FPT-1015

  • Page 1

    Fpt-1015 user manual fpt-1015 user manual december 2006 372051a-01.

  • Page 2

    Support worldwide technical support and product information ni.Com national instruments corporate headquarters 11500 north mopac expressway austin, texas 78759-3504 usa tel: 512 683 0100 worldwide offices australia 1800 300 800, austria 43 0 662 45 79 90 0, belgium 32 0 2 757 00 20, brazil 55 11 326...

  • Page 3: Important Information

    Important information warranty the fpt-1015 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National instruments will, at its option, repair or replace equipment that proves to be defective...

  • Page 4: Compliance

    Compliance compliance with fcc/canada radio frequency interference regulations determining fcc class the federal communications commission (fcc) has rules to protect wireless communications from interference. The fcc places digital electronics into two classes. These classes are known as class a (fo...

  • Page 5: Conventions

    Conventions the following conventions are used in this manual: » the » symbol leads you through nested menu items and dialog box options to a final action. The sequence file»page setup»options directs you to pull down the file menu, select the page setup item, and select options from the last dialog...

  • Page 6: Contents

    © national instruments corporation vii fpt-1015 user manual contents chapter 1 general information introduction....................................................................................................................1-1 connectors .............................................................

  • Page 7: General Information

    © national instruments corporation 1-1 fpt-1015 user manual 1 general information this chapter includes an overview of the fpt-1015 human machine interface (hmi). Introduction the fpt-1015 is a 15 in. Color tft lcd flat panel monitor for industrial applications. With the optional touchscreen, this m...

  • Page 8

    Chapter 1 general information fpt-1015 user manual 1-2 ni.Com usb type b touchscreen connector the fpt-1015 includes this connector and a touchscreen cable if a touchscreen is installed. You must connect it to the pc usb port. Dc 12 v power in this connector connects to the dc 12 v switching power s...

  • Page 9: Mounting

    © national instruments corporation 2-1 fpt-1015 user manual 2 mounting this chapter explains how to mount the fpt-1015. Important safety information before setting up the fpt-1015, read these safety instructions carefully. Disconnect this equipment from any ac outlet before cleaning. Use a damp clot...

  • Page 10

    Chapter 2 mounting fpt-1015 user manual 2-2 ni.Com if one of the following situations arises, have service personnel check the equipment: • the power cord or plug is damaged. • liquid has penetrated into the equipment. • the equipment has been exposed to moisture. • the equipment does not work well,...

  • Page 11: Wall Mounting

    Chapter 2 mounting © national instruments corporation 2-3 fpt-1015 user manual wall mounting the fpt-1015 wall mounting kit is optional. As shown in figure 2-1, screw the hook and wall-mounted brackets to the wall and attach the fpt-1015 to the bracket. Figure 2-1. Wall mounting hook bracket wall-mo...

  • Page 12: Panel Mounting

    Chapter 2 mounting fpt-1015 user manual 2-4 ni.Com panel mounting refer to figure 2-2 and follow these steps to install the fpt-1015 in a panel: 1. Place the panel-mounting brackets on the fpt-1015. 2. Fasten the panel-mounting brackets with the screws. 3. Insert the fpt-1015 in the panel. 4. Tighte...

  • Page 13: Rack Mounting

    Chapter 2 mounting © national instruments corporation 2-5 fpt-1015 user manual rack mounting the rack mounting kit is optional. As shown in figure 2-3, you can directly mount the fpt-1015 in a standard 19 in. Rack and secure it with four screws. Figure 2-3. Rack mounting.

  • Page 14: Desktop Stand Mounting

    Chapter 2 mounting fpt-1015 user manual 2-6 ni.Com desktop stand mounting the desktop stand kit is optional. As shown in figure 2-4, attach the desktop stand bracket to the rear of the monitor with two screws. Figure 2-4. Desktop stand mounting power adapter mounting attach the power adapter bracket...

  • Page 15: Specifications

    © national instruments corporation a-1 fpt-1015 user manual a specifications physical construction ........................................... Heavy-duty steel chassis front panel ............................................. Al-mg, nema4/ip65 compliant control .........................................

  • Page 16

    Appendix a specifications fpt-1015 user manual a-2 ni.Com dimensions 383 [15.07] 307 [12.08] 372.6 [14.66] 308.26 [12.13] 270.59 [10.65] 296.6 [11.67] 214.1 [8.42] 15 [0.59] 4.5 [0.17] 18.5 [0.72] 48.13 [1.89] 100 [3.93] 75 [2.95] 100 [3.93] 75 [2.95].

  • Page 17

    Appendix a specifications © national instruments corporation a-3 fpt-1015 user manual touchscreen type ....................................................... 8 wire, analog resistive resolution .............................................. 1024 × 1024 light transmission...............................

  • Page 18

    Appendix a specifications fpt-1015 user manual a-4 ni.Com sensor board ...........................................Chemical strengthened glass with 4 h hardness standard (test condition: astm d3363-92a) ball drop test...........................................Able to bear a 225 g steel ball dropped f...

  • Page 19

    Appendix a specifications © national instruments corporation a-5 fpt-1015 user manual environmental maximum altitude .................................. 2,000 m pollution degree .................................... 2 indoor use only touchscreen operating temperature range.................. –20 to 50 ...

  • Page 20

    Appendix a specifications fpt-1015 user manual a-6 ni.Com electromagnetic compatibility this product is designed to meet the requirements of the following standards of emc for electrical equipment for measurement, control, and laboratory use: • en 55024, cispr 24 emc requirements • en 55022, cispr 2...

  • Page 21: Display Timing Mode and Osd

    © national instruments corporation b-1 fpt-1015 user manual b display timing mode and osd supported input timing modes the fpt-1015 supports and automatically recognizes the frequencies listed in table b-1. Note even if you use the preset timing, you may need to adjust functions such as horizontal p...

  • Page 22: Keypad Interface

    Appendix b display timing mode and osd fpt-1015 user manual b-2 ni.Com keypad interface table b-2 lists key functions. Power indicator led status the keypad interface includes a dual-color led driver to indicate status as follows: • green—the board detects an input signal and sends an output signal ...

  • Page 23: Osd Function

    Appendix b display timing mode and osd © national instruments corporation b-3 fpt-1015 user manual osd function each selected osd function value is stored into lcd memory after an sel signal input or timeout. The stored values are not affected if the power is off. However, the selected value is not ...

  • Page 24: Touchscreen

    © national instruments corporation c-1 fpt-1015 user manual c touchscreen this appendix explains how to install and configure the fpt-1015 touchscreen. Introduction the fpt-1015 touchscreen uses advanced 8-wire resistive technology, providing more accurate sensing capacity than other technologies. T...

  • Page 25

    Appendix c touchscreen fpt-1015 user manual c-2 ni.Com standard calibration when you click this button, arrows appear pointing to red squares. Use your finger or stylus to touch the red squares in sequence. After you touch the fifth red square, calibration is complete. To skip, press . Note to acces...

  • Page 26

    Appendix c touchscreen © national instruments corporation c-3 fpt-1015 user manual follow these steps to enable multiple displays: 1. In the multiple monitors tab, check the multiple monitor support box. 2. Click map touch screens to assign touch controllers to the displays. 3. When the mapping scre...

  • Page 27

    Appendix c touchscreen fpt-1015 user manual c-4 ni.Com click on touch—this option allows the mouse to have only a click function, and dragging is disabled. Beep sound mode enable beep sound—this option turns the beep function on and off. Beep on pen down—in this mode, the beep occurs when the pen go...

  • Page 28

    Appendix c touchscreen © national instruments corporation c-5 fpt-1015 user manual configuring the rotate function follow these steps to configure the rotate function: 1. Install the rotation software package. 2. Choose the rotate function in the software. The calibration screen appears automaticall...

  • Page 29

    Appendix c touchscreen fpt-1015 user manual c-6 ni.Com penmount monitor menu icon the penmount monitor icon ( pm ) appears in the windows menu bar when you turn on penmount monitor in penmount usb utilities. Penmount monitor has the following functions: control panel brings up the penmount control p...

  • Page 30: Technical Support and

    © national instruments corporation d-1 fpt-1015 user manual d technical support and professional services visit the following sections of the national instruments web site at ni.Com for technical support and professional services: • support —online technical support resources at ni.Com/support inclu...

  • Page 31: Index

    © national instruments corporation i-1 fpt-1015 user manual index a about function, c-5 advanced calibration, c-2 c calibrate function, c-1 calibration advanced, c-2 plot calibration data, c-2 standard, c-2 ce compliance specifications, a-6 cleaning, a-6 connectors, 1-1 dc 12 v power in, 1-2 usb typ...

  • Page 32

    Index fpt-1015 user manual i-2 ni.Com mounting, 2-1 desktop stand mounting, 2-6 panel mounting, 2-4 power adapter mounting, 2-6 rack mounting, 2-5 wall mounting, 2-3 osd function, b-3 menus (table), b-3 penmount monitor menu icon, c-6 penmount rotating functions, c-4 configuring, c-5 physical specif...

  • Page 33

    Index © national instruments corporation i-3 fpt-1015 user manual penmount monitor menu icon, c-6 penmount rotating functions, c-4 configuring, c-5 physical specifications, a-1 plot calibration data, c-2 power adapter mounting, 2-6 specifications, a-4 power indicator led status, b-2 programming exam...