Ni vision ni pci-1410 user manual high-quality monochrome image acquisition device ni pci-1410 user manual february 2007 373793c-01.
Support worldwide technical support and product information ni.Com national instruments corporate headquarters 11500 north mopac expressway austin, texas 78759-3504 usa tel: 512 683 0100 worldwide offices australia 1800 300 800, austria 43 662 457990-0, belgium 32 (0) 2 757 0020, brazil 55 11 3262 3...
Important information warranty the ni pci-1410 is warranted against defects in materials and workmanship for a period of one year from the date of shipment, as evidenced by receipts or other documentation. National instruments will, at its option, repair or replace equipment that proves to be defect...
Compliance compliance with fcc/canada radio frequency interference regulations determining fcc class the federal communications commission (fcc) has rules to protect wireless communications from interference. The fcc places digital electronics into two classes. These classes are known as class a (fo...
Conventions the following conventions are used in this manual: angle brackets that contain numbers separated by an ellipsis represent a range of values associated with a bit or signal name—for example, ao . » the » symbol leads you through nested menu items and dialog box options to a final action. ...
© national instruments corporation vii ni pci-1410 user manual contents chapter 1 introduction about the ni 1410 device .............................................................................................1-1 software overview ....................................................................
Contents ni pci-1410 user manual viii ni.Com appendix a custom cables appendix b technical support and professional services glossary index.
© national instruments corporation 1-1 ni pci-1410 user manual 1 introduction this chapter describes the ni pci-1410 (ni 1410) device and its software programming options. About the ni 1410 device the ni 1410 is a high-accuracy, monochrome image acquisition device for pci that supports rs-170, ccir,...
Chapter 1 introduction ni pci-1410 user manual 1-2 ni.Com refer to figure 1-1 for the location of the ni 1410 w1 jumper and the connectors discussed in this manual. Figure 1-1. Ni pci-1410 parts locator diagram software overview programming the ni 1410 requires the ni-imaq driver software for contro...
Chapter 1 introduction © national instruments corporation 1-3 ni pci-1410 user manual ni-imaq driver software the ni 1410 ships with ni vision acquisition software, which includes the ni-imaq driver software. Ni-imaq has an extensive library of functions—such as routines for video configuration, con...
Chapter 1 introduction ni pci-1410 user manual 1-4 ni.Com individual tasks. You also can migrate the configured inspection to labview, extending the capabilities of the applications if necessary. Vision development module the vision development module is an image acquisition, processing, and analysi...
Chapter 1 introduction © national instruments corporation 1-5 ni pci-1410 user manual integration with daq and motion control platforms that support ni-imaq also support ni-daq and a variety of national instruments daq devices. This allows integration between image acquisition devices and national i...
© national instruments corporation 2-1 ni pci-1410 user manual 2 hardware overview this chapter describes the features of the ni pci-1410 device and includes information about acquisition modes, analog front-end considerations, and clamping. Functional overview the ni 1410 features a flexible, high-...
Chapter 2 hardware overview ni pci-1410 user manual 2-2 ni.Com the block diagram in figure 2-1 illustrates the key functional units of the ni 1410. Figure 2-1. Ni 1410 block diagram video multiplexer the video multiplexer routes one of the four ac-coupled video inputs to the 10-bit adc circuitry. Th...
Chapter 2 hardware overview © national instruments corporation 2-3 ni pci-1410 user manual digital filter and lut the digital filter removes chrominance from a composite color video signal that conforms to either pal or ntsc. The output of the digital filter passes through the 1,024 × 10-bit lookup ...
Chapter 2 hardware overview ni pci-1410 user manual 2-4 ni.Com acquisition and region-of-interest control the acquisition and region-of-interest (roi) control circuitry routes the active pixels from the 10-bit adc to the onboard memory. The ni 1410 can perform roi and scaling on all video lines. Pix...
Chapter 2 hardware overview © national instruments corporation 2-5 ni pci-1410 user manual • external hsync/vsync (hlock only) mode —in external hsync/vsync (hlock only) mode, the ni 1410 receives the external hsync and vsync signals and internally generates the pclk signal. In this mode, the ni 141...
Chapter 2 hardware overview ni pci-1410 user manual 2-6 ni.Com to prevent this problem, open measurement & automation explorer (max) and navigate to the advanced tab of the camera file property page. Use the following guidelines to adjust the clamp start and clamp stop values until the image is corr...
© national instruments corporation 3-1 ni pci-1410 user manual 3 signal connections this chapter describes cable connections for the ni pci-1410 device. Video input channels the video input channels for the ni 1410 support two input modes—referenced single-ended (rse) and differential (diff). A chan...
Chapter 3 signal connections ni pci-1410 user manual 3-2 ni.Com figure 3-1. Ni pci-1410 parts locator diagram figure 3-2 shows the bnc connector pin assignments. Figure 3-2. Bnc connector pin assignment digital i/o connector the 68-pin vhdci connector connects to all video signals (video0, video1, v...
Chapter 3 signal connections © national instruments corporation 3-3 ni pci-1410 user manual figure 3-3 shows the pinout of the 68-pin vhdci connector. Figure 3-3. I/o connector pin assignments 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 68 67 66 65 64...
Chapter 3 signal connections ni pci-1410 user manual 3-4 ni.Com digital i/o connector signal connection descriptions table 3-1 describes each signal connection on the 68-pin vhdci connector. Table 3-1. I/o connector signals signal name description video0 ± video0 ± allows for a diff or rse connectio...
Chapter 3 signal connections © national instruments corporation 3-5 ni pci-1410 user manual trig triggers are ttl i/o lines used to start or stop an acquisition or output an acquisition status. You can program the triggers to be rising- or falling-edge sensitive. You also can program the triggers to...
© national instruments corporation a-1 ni pci-1410 user manual a custom cables this appendix lists specifications for building custom cables to use with the ni pci-1410 device. Cable specification national instruments offers cables and accessories for you to connect to video sources, trigger sources...
© national instruments corporation b-1 ni pci-1410 user manual b technical support and professional services visit the following sections of the national instruments web site at ni.Com for technical support and professional services: • support —online technical support resources at ni.Com/support in...
Appendix b technical support and professional services ni pci-1410 user manual b-2 ni.Com • calibration certificate —if your product supports calibration, you can obtain the calibration certificate for your product at ni.Com/calibration . If you searched ni.Com and could not find the answers you nee...
© national instruments corporation g-1 ni pci-1410 user manual glossary a a/d analog-to-digital. Adc analog-to-digital converter. An electronic device, often an integrated circuit, that converts an analog voltage to a digital value. Address value that identifies a specific location (or series of loc...
Glossary ni pci-1410 user manual g-2 ni.Com d daq data acquisition. (1) collecting and measuring electrical signals from sensors, transducers, and test probes or fixtures and inputting them to a computer for processing. (2) collecting and measuring the same kinds of electrical signals with a/d or di...
Glossary © national instruments corporation g-3 ni pci-1410 user manual h hsync horizontal synchronization signal. The synchronization pulse signal produced at the beginning of each video scan line that keeps a video monitor’s horizontal scan rate in step with the transmission of each new line. I in...
Glossary ni pci-1410 user manual g-4 ni.Com n ni-imaq driver software for national instruments image acquisition hardware. Ntsc national television standards committee. The committee that developed the color video standard used primarily in north america, which uses 525 lines per frame. See also pal...
Glossary © national instruments corporation g-5 ni pci-1410 user manual rse referenced single-ended. All measurements are made with respect to a common reference measurement system or a ground. Also called a grounded measurement system. Rtsi bus real-time system integration bus. The national instrum...
© national instruments corporation i-1 ni pci-1410 user manual index numerics 10-bit adc, 2-2 10-bit lut, 2-3 a acquisition and region-of-interest control, 2-4 adc, 10-bit, 2-2 analog bandwidth control circuitry, 2-2 analog front end considerations, 2-5 antichrominance filter, 2-3 application softwa...
Index ni pci-1410 user manual i-2 ni.Com functional overview, 2-1 genlock and synchronization circuitry, 2-3 pci interface, 2-3 pclk, hsync, vsync mux, 2-3 programmable gain and offset, 2-2 rtsi bus, 2-4 scatter-gather dma controllers, 2-3 video mux, 2-2 help, technical support, b-1 hsync genlock an...
Index © national instruments corporation i-3 ni pci-1410 user manual s scatter-gather dma controllers, 2-3 signal connections bnc connector, 3-1 i/o connector, 3-2 pin assignments (figure), 3-3 signal descriptions (table), 3-4 software ni resources, b-1 vision development module, 1-4 software progra...