National Instruments NI 1712 User Manual - page 66
© National Instruments
|
A-1
A
Specifications
The following specifications apply to the NI 1712/1732/1752/1754 Smart Camera.
These specifications are typical at 25 °C, unless otherwise stated.
Power Requirements
Power consumption
NI 1712/1732............................................ 24 VDC, +20%/-15% (IEC 1311); 450 mA
NI 1752/1754
Direct Drive disabled........................ 24 VDC, +20%/-15% (IEC 1311); 450 mA
Direct Drive enabled......................... 24 VDC, +20%/-15% (IEC 1311); 800 mA
Reverse polarity protection............................... Yes
Memory
SDRAM ............................................................ 256 MB
Nonvolatile program/data memory................... 512 MB
Image/data storage............................................ Unlimited using FTP or an Ethernet hard drive
Processor
NI 1712/1732.................................................... Freescale PowerQUICC II Pro 400 MHz
NI 1752/1754.................................................... Freescale PowerQUICC II Pro 600 MHz
VGA Sensor (NI 1712/1732/1752 Only)
Sensor ............................................................... Sony CCD ICX424AL
Active pixels (VGA)
Full scan.................................................... 640 × 480
1/2 scan ..................................................... 640 × 240
1/4 scan ..................................................... 640 × 120
Binning (1 × 2) ......................................... 640 × 240
Pixel size........................................................... 7.4
μ
m × 7.4
μ
m
Pixel pitch for field of view calculation
Full scan, 1/2 scan, 1/4 scan ..................... 7.4
μ
m horizontal,
7.4
μ
m vertical
Binning (1 × 2) ......................................... 7.4
μ
m horizontal,
14.8
μ
m vertical