National Instruments NI 177x User Manual - page 30
6-4
|
ni.com
Chapter 6
Power and I/O
Output Ripple and Noise...................................240 mV Max at 20 Mhz bandwidth with
10 UF/50 V capacitance and 104/50 V
ceramic capacitor.
Efficiency
83.62% at average of 25/50/75/100% loads
115 and 230 VAC input
Line Regulation.................................................2% Max
Hold Up Time ...................................................10 ms Min at 110 VAC full load
Turn On Time ...................................................2 s Max at 110 VAC full load
M12 to 25-pin DSUB Cable
The I/O connector is a 17-pin male M12 connector that provides power to the smart camera and
transmits digital I/O signals. This cable is included with the Power & I/O Accessory for NI 177x
Smart Cameras.
Figure 6-4.
M12 to DSUB Cable