- DL manuals
- National Instruments
- Network Card
- NI 9403
- Operating Instructions Manual
National Instruments NI 9403 Operating Instructions Manual - page 23
© 2007–2008 National Instruments Corp. All rights reserved.
374069E-01
Jun08
National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation. Refer to the
Terms of Use
section on
ni.com/legal
for more information about National Instruments trademarks. Other
product and company names mentioned herein are trademarks or trade names of their respective companies.
For patents covering National Instruments products, refer to the appropriate location:
Help»Patents
in your software,
the
patent
s
.txt
file on your media, or
ni.com/patent
s
.
Summary of NI 9403
Page 1
Operating instructions and specifications ni 9403 32-channel, ttl digital input/output module ni.Com/manuals deutsch français.
Page 2
Ni 9403 operating instructions and specifications 2 ni.Com this doc u ment describes how to u se the national instr u ments 9403 and incl u des specifications and pin assignments for the ni 9403. Visit ni.Com/info and enter rd s oftwarever s ion to determine which software yo u need for the mod u le...
Page 3
© national instruments corp. 3 ni 9403 operating instructions and specifications safety guidelines operate the ni 9403 only as described in these operating instr u ctions. Hot surface this icon denotes that the component may be hot. To u ching this component may res u lt in bodily inj u ry. Safety g...
Page 4
Ni 9403 operating instructions and specifications 4 ni.Com caution s u bstit u tion of components may impair s u itability for class i, division 2. Caution for zone 2 applications, install the system in an enclos u re rated to at least ip 54 as defined by iec 60529 and en 60529. Caution for zone 2 a...
Page 5
© national instruments corp. 5 ni 9403 operating instructions and specifications special conditions for marine applications some mod u les are lloyd’s register (lr) type approved for marine applications. To verify lloyd’s register certification, visit ni.Com/certification and search for the lr certi...
Page 6
Ni 9403 operating instructions and specifications 6 ni.Com connecting the ni 9403 the ni 9403 has a 37-pin dsub connector that provides connections for the 32 digital inp u t/o u tp u t channels. Figure 1. Ni 9403 pin assignments dio16 dio17 dio18 dio19 dio20 dio21 dio22 dio23 com com dio24 dio25 di...
Page 7
© national instruments corp. 7 ni 9403 operating instructions and specifications each channel has a dio pin to which yo u can connect a digital inp u t or o u tp u t device. The 32 dio channels are internally referenced to com, so yo u can u se any of the fo u r com lines as a reference for the exte...
Page 8
Ni 9403 operating instructions and specifications 8 ni.Com refer to fig u re 2 for an ill u stration of several types of digital devices connected to the ni 9403. Figure 2. Connecting digital devices to the ni 9403 ttl signal +5 v +5 v led dio0 as input dio1 as input com dio2 as output ni 9403 dev 3...
Page 9
© national instruments corp. 9 ni 9403 operating instructions and specifications overcurrent/short-circuit protection the overc u rrent protection allows only a specified amo u nt of c u rrent thro u gh the o u tp u t channels to protect the ni 9403 from short circ u its. If the ni 9403 goes into an...
Page 10
Ni 9403 operating instructions and specifications 10 ni.Com ni.Com/info and enter c s erie s doc for information abo u t c series doc u mentation. Typically, when a system is in sleep mode, yo u cannot comm u nicate with the mod u les. In sleep mode, the system cons u mes minimal power and may dissi...
Page 11
© national instruments corp. 11 ni 9403 operating instructions and specifications digital logic levels inp u t voltage ................................. –0.25 to 5.25 v high, v ih .............................. 2.2 v min low, v il ............................... 0.8 v max hysteresis, v h ..............
Page 12
Ni 9403 operating instructions and specifications 12 ni.Com timing inp u t set u p time 1 ........................... 10 ns min hold time 2 ............................ 60 ns min o u tp u t propagation delay 3 ............... 330 ns max channel-to-channel skew 4 ... 265 ns max 1 setup time is the am...
Page 13
© national instruments corp. 13 ni 9403 operating instructions and specifications update/transfer time 1 crio-9151 r series expansion chassis ................ 8 μ s max all other chassis................... 7 μ s max direction change time 1 ............... 18 μ s max overvoltage protection channel-to...
Page 14
Ni 9403 operating instructions and specifications 14 ni.Com mtbf ............................................... 763,325 ho u rs at 25 °c; bellcore iss u e 2, method 1, case 3, limited part stress method note contact ni for bellcore mtbf specifications at other temperat u res or for mil-hdbk-217f sp...
Page 15
© national instruments corp. 15 ni 9403 operating instructions and specifications safety safety voltages connect only voltages that are within the following limits. Channel-to-com .............................. ±30 v max on u p to 8 channels at a time, meas u rement category i isolation channel-to-c...
Page 16
Ni 9403 operating instructions and specifications 16 ni.Com eq u ipment, limited-energy parts of eq u ipment, circ u its powered by reg u lated low-voltage so u rces, and electronics. Caution do not connect the ni 9403 to signals or u se for meas u rements within meas u rement categories ii, iii, or...
Page 17
© national instruments corp. 17 ni 9403 operating instructions and specifications hazardous locations u.S. (ul) .......................................... Class i, division 2, gro u ps a, b, c, d, t4; class i, zone 2, aex na iic t4 canada (c-ul) ................................. Class i, division 2,...
Page 18
Ni 9403 operating instructions and specifications 18 ni.Com operating h u midity (iec 60068-2-56).............................. 10 to 90% rh, noncondensing storage h u midity (iec 60068-2-56).............................. 5 to 95% rh, noncondensing maxim u m altit u de............................. 2...
Page 19
© national instruments corp. 19 ni 9403 operating instructions and specifications electromagnetic compatibility this prod u ct is designed to meet the req u irements of the following standards of emc for electrical eq u ipment for meas u rement, control, and laboratory u se: • en 61326 emc req u ire...
Page 20
Ni 9403 operating instructions and specifications 20 ni.Com ni.Com/certification , search by mod u le n u mber or prod u ct line, and click the appropriate link in the certification col u mn. Environmental management national instr u ments is committed to designing and man u fact u ring prod u cts i...
Page 21
© national instruments corp. 21 ni 9403 operating instructions and specifications where to go for support the national instr u ments web site is yo u r complete reso u rce for technical s u pport. At ni.Com/ s upport yo u have access to everything from tro u bleshooting and application development s...
Page 22
Ni 9403 operating instructions and specifications 22 ni.Com telephone s u pport o u tside the united states, contact yo u r local branch office: a u stralia 1800 300 800, a u stria 43 662 457990-0, belgi u m 32 (0) 2 757 0020, brazil 55 11 3262 3599, canada 800 433 3488, china 86 21 5050 9800, czech...
Page 23
© 2007–2008 national instruments corp. All rights reserved. 374069e-01 jun08 national instruments, ni, ni.Com, and labview are trademarks of national instruments corporation. Refer to the terms of use section on ni.Com/legal for more information about national instruments trademarks. Other product a...