National Instruments NI H1X38 User Manual

Summary of NI H1X38

  • Page 1

    User guide digital flying lead cable accessory for single-ended ni digital waveform generator/analyzers the ni shc68-h1x38 cable is a single-ended cable that breaks out each ni digital waveform generator/analyzer signal into two 0.1 inch header receptacles, one receptacle each for the signal and gro...

  • Page 2: What You Need to Get Started

    Digital flying lead cable user guide 2 ni.Com what you need to get started to set up and use the ni shc68-h1x38 cable, you need the following items: ❑ compatible ni digital waveform generator/analyzer, installed in a pxi chassis, compactpci chassis, or pci slot ❑ the documentation included with the ...

  • Page 3: Parts Locator

    © national instruments corporation 3 digital flying lead cable user guide parts locator refer to figure 1 to locate connectors and components on the ni shc68-h1x38 cable. The lead pairs are shown in more detail in figure 2. Figure 1. Ni shc68-h1x38 cable parts locator diagram 1 lead pairs 2 removabl...

  • Page 4: Connecting Signals

    Digital flying lead cable user guide 4 ni.Com figure 2. Detailed parts locator diagram for the lead pairs connecting signals each dio, pfi, and clock channel of the ni digital waveform generator/analyzer connects to a corresponding pair of leads on the ni shc68-h1x38 cable. The ni shc68-h1x38 cable ...

  • Page 5

    © national instruments corporation 5 digital flying lead cable user guide clkout / pfi 4 for devices that have a ddc clk out channel, this signal is the exported sample clock signal. Otherwise, this is pfi 4. Bundle a pfi programmable functional interface pfi . Pfi 1: bundle a pfi : bundle b reserve...

  • Page 6: Using Your Accessory

    Digital flying lead cable user guide 6 ni.Com using your accessory the ni sch68-h1x38 cable breaks out every signal through a 50 Ω characteristic impedance microcoaxial cable, which is then split into the two leads with receptacles. This cable was designed for both acquisition and generation operati...

  • Page 7: Specifications

    © national instruments corporation 7 digital flying lead cable user guide specifications digital i/o dio channels......................................... 32, single-ended control i/o channels ............................. 6, single-ended typical propagation delay ..................... 13.5 ns typic...

  • Page 8

    National instruments, ni, ni.Com, and labview are trademarks of national instruments corporation. Refer to the terms of use section on ni.Com/legal for more information about national instruments trademarks. Other product and company names mentioned herein are trademarks or trade names of their resp...