National Instruments SCXI-1102 Application Note - page 5
Other manuals for SCXI-1102:
User Manual
Manual is about: 32-Channel Thermocouple Amplifier Modules
of
10
5
The Windows system settings are shown below:
1. Configure your
plug-in DAQ board
(if used) as device
number 1.
2. Click on the SCXI
menu to open the
SCXI Configuration
window.
1. Select your chassis type.
4. Click here to
configure Module 1.
These settings will be set auto-
matically for you.
2. Select chassis slot 1.
3. Select the SCXI-1102 module.
1. Select your DAQ board
(Dev #1).
3. Set channel to 0.
2. Select your terminal block.
4. Set gain to 100.0.
5. Save your settings.