National Instruments TPC-2230 User Manual - page 10
10
|
ni.com
|
TPC-2230 User Manual
CMOS Clear Jumper (CN1)
The CMOS Clear jumper is disabled by default. To enable CMOS Clear, move the jumper from
the 1-2 position to the 2-3 position. Pin 1 is the pin on CN1 closest to the front panel connectors.
Specifications
This section lists the TPC-2230 system specifications.
Physical
6.5 in.
Weight
1.5 kg (52.91 oz)
Dimensions (W × H × D)
199 mm × 152 mm × 58.9 mm
(7.83 in. × 5.98 in. × 2.32 in.)
Cutout dimensions (suggested)
189.1 mm× 142.1 mm
(7.44 in. × 5.59 in.)
12.1 in.
Weight
2.5 kg (88.18 oz)
Dimensions (W × H × D)
311.8 mm × 238 mm× 57.2 mm
(12.28 in. × 9.37 in. × 2.25 in.)
Cutout dimensions (suggested)
303 mm× 229 mm
(11.93 in. × 9.02 in.)
Table 1-7.
CN1 Jumper Functions
Position
Function
1-2
Disabled
2-3
Clear CMOS
3
1
3
1