National Vacuum Equipment 607 challenger series Replacement And Rebuild Manual - Pump Rebuilding
Other manuals for 607 challenger series:
Owner's Manual And Operating Instructions
Manual is about: Rotary Vane Vacuum Pumps
of
20
6
| 607 Challenger
Series
www.natvac.com | 800.253.5500
Pump Rebuilding
1 Clean off the exterior of the pump
2 Remove the oil line guard
Disconnect all oil lines feeding
from the oil pump
Uninstall the oil pump from the
rear bearing cover
3 Remove the four (4) bolts that
hold the rear bearing cover to
the rear endplate and note that
the wave spring seal is to be
re-used
607 Fan & Liquid