NaturCut IDEAL Owner's Manual - page 10
Owner’s Manual — IDEAL
2.
You may check the adjustment using the small 0.05mm/0.002 inch
gauge (silver strip) supplied with the mower (or any 0.05mm/0.002
inch feeler gauge). If the gauge is touched by the cylinder blades
but the cylinder and cutting bar are not touching then the
adjustment is correct.
3.
The blades may also be tested by inserting a piece of paper
vertically into the blades while turning them by hand.
Mower
Cutting width:
40 cm (16 inches)
Weight:
9.1 kg (20 lb)
Cutting height approximate: 13-75 mm (.5 - 3 inches)
8
TECHNICAL DATA
WARNING
Blades are sharp! Be careful of injury —
handle the blades carefully to avoid
cutting yourself. Wear appropriate gloves
or hand protection.
!