Save these instructions 30 amp solar charge controller owner’s manual warning: read carefully and understand all assembly and operation instructions before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 60032 v1.4-m 25au...
Page 2 of 11 thank you very much for choosing a nature power product! For future reference, please complete the owner’s record below: model:__________________________________________________ purchase date: ____________________________________________ save the receipt, warranty, and this manual. It i...
Page 3 of 11 page 3/10 table of contents table of contents ................................................................................................................................ 3 intended use ....................................................................................................
Intended use this charge controller is used to regulate power from a solar panel, to a 12v battery. The controller handles up to 30 amps and also prevents overcharging, high-voltage surges, short circuit or low voltage discharges, and reverse current. Technical specifications property specification ...
Page 5 of 11 important safety information • read and understand all instructions. Failure to follow all instructions may result in serious injury or property damage. • the warnings, cautions, and instructions in this manual cannot cover all possible conditions or situations that could occur. Exercis...
Page 6 of 11 work area safety • inspect the area before each use. Keep it area clean, dry, free of clutter, and well lit. Cluttered, wet, or dark work areas can result in injury. • do not use the charge controller and solar panels where there is a risk of causing a fire or an explosion; e.G., in the...
Page 7 of 11 assembly no assembly required except the connections for operation. See operating instructions before each use check for damaged connectors or indicators on the controller before each use. Replace the controller if damaged. Operating instructions • check the ratings of the solar panel, ...
Page 8 of 11 first: battery second: panel third: other load when the system is connected correctly, the controller’s power out indicator illuminates. Note: do not connect the battery cables directly to the solar panels. Do not connect any power supply directly to the solar panels. 4. As the system c...
Page 9 of 11 troubleshooting • if the power out indicator does not illuminate soon after connected to the uncovered solar panel, check that the connections are secure. If the indicator still does not illuminate, the voltage may be too low, make corrections to the system as needed. • if the battery i...
Pleasecontactnaturepowerproductstoacquiremoreinformation: 1-800-588-0590 info@naturepowerproducts.Com www.Naturepowerproducts.Com made in china page 10/10 limited warranty naturepowerwarrantsourproductstotheoriginalpurchaserthatthisproductisfreefromdefectsin materials andworkmanshipfortheperiodof 2y...
