Nature Power Elite 15 Owner's Manual
V1.1
1
Power Bank Elite Series
Owner’s Manual
Product Description
Congratulations on purchasing your Nature Power Power Bank Elite. You can now charge all you digital devices
easier than ever and also power your AC appliances too!
For safe and optimum performance, the unit must be used in accordance to the guidelines in this manual.
Carefully read all instructions and cautionary markings on the unit and follow all instructions and guidelines in
this manual. Please pay special attention to the WARNING statements. Please keep this manual for future
reference. The Power Bank Elite contains a Lithium Battery which requires it to be fully charged upon
purchasing. Please immediately charge the unit for 10 hours with the AC charge included
to optimize performance and lifespan of the Power Bank Elite. It is recommended to charge the unit after each
use and once every 90 days. Disclaimer: While every precaution has been taken to ensure the accuracy of the
contents of this guide, Nature Power assumes no responsibility for errors or omissions. Nature Power reserves
the right to make changes to the product, specifications and this manual without notice. Therefore, check the
website for manual updates as necessary.
www.naturepowerproducts.com
Item Number:
•
50026 -‐ Power Bank Elite 25
•
50014 -‐ Power Bank Elite 15
Features and Accessories
Product Accessory
•
AC Charger with charging cable
Features
•
Internal microprocessor control
•
Low static power consumption
•
Intelligent capacity indication by LEDs with the press of a button
•
Separate LED indicators to show USB and AC Output
•
Dual 2.1A and single 1A USB with high conversion efficiency.
•
Intelligent tri-‐color indicator to represent AC Output (Green -‐ normal, Amber – warning for battery
capacity low, high internal temperature, Red -‐ shutdown for overload, over-‐temperature, battery is
empty)
•
Thermally activated internal fan control
Battery Charge Level Indicator
•
All LEDs on: 75-‐100% capacity
•
3 LEDs on: 50-‐75% capacity
•
2 LEDs on: 25-‐50% capacity
•
1 LED on: 5-‐25% capacity
•
All LEDs out: less than 5% capacity