Nature's Comfort SunMor SM-V30 Installation Manual

Other manuals for SunMor SM-V30: Installation Manual

Summary of SunMor SM-V30

  • Page 1

    Sunmor sm-v30 solar water heater installation manual by congratulations on the purchase of your new sunmor sm-v30 from nature’s comfort llc! You must read this entire instruction manual before beginning installation to completely understand system requirements. Aquastats, heat exchangers, mixing val...

  • Page 2

    How it works • the sunmor sm-v30 by nature’s comfort llc is a solar water heater that uses the sun’s radiant energy to heat water through the use of 30 double wall vacuum insulated glass tubes. Each tri-element glass tube has a coating on the outside of the inner layer of glass made up of nitrogen a...

  • Page 3

    Assembly - wear gloves and safety glasses! • assemble the frame (and mount securely if on a roof), mount the storage tank, auto-fill valve and vent tube. Snap the black plastic tube-end holders in place on the bottom of the frame. • note! When installing fittings in the storage tank ports, do not ov...

  • Page 4

    • off the extra port from the auto-fill valve, run a line to drain water that overflows from heat expansion to a desired area. • run a line from the left copper coil heat exchanger port to the cold water input of your domestic water heater. • all water lines must be super insulated using closed-cell...