Nauticam NA-NEX6 Instruction Manual - page 15
Manual is about: Underwater Camera Housing
of
19
14
Please refer to the NAUTICAM system port chart for a range of compatible
ports.
1. Remove the O-ring from the
port, inspect for any damage
and lightly coat it with the
provided lubricant before
placing it back into its groove.
2. Verify that the port opening of
the housing is clean and free
from foreign material.
3. Lift the Port lock/release latch.
4. Press and hold the port release
safety button, turn the port
lock/release latch clockwise for
60 until the circle mark on the
latch aligns with the “RELEASE”
index on the rear housing.
Press
5. Lift housing cap.