Summary of NA-TG3
Page 1
0
Page 2
1 thank you for your purchase of a nauticam camera housing. At nauticam, we pride ourselves on the ability to recognise the requirements of professional as well as amateur underwater photographers and fulfill them through the innovative designs of our products. We strive to achieve a high level of u...
Page 3
2 1. All nauticam products are warranted against any material and manufacturing defects for one year from the date of purchase for consumer use. Please fill in the warranty cards shipped with our housings and viewfinders at the time of sale and return them to your point of purchase within a month. I...
Page 4
3 1. Na-tg3 housing 2. Instruction manual 3. Spare silicone rubber housing o-ring 4. O-ring remover 5. Lubricant 6. Set of allen keys 7. Diffuser spare silicone rubber o-ring o-ring remover lubricant set of allen keys diffuser.
Page 5
4 1. A water-tight test without the camera inside the housing is highly recommended when using the system for the first time and after the changing of port and o-ring(s). 2. Do not use lubricants from other brands with the silicone rubber o- ring on this housing, only use the lubricant provided by n...
Page 6
5 specifications 6 identification of parts 7 preparation of the housing 9 opening and locking the housing 10 installing the camera 11 care and maintenance 12 optional accessories 13.
Page 7
6 construction housing body: aluminium alloy surface treatment: hard anodised display window: abrasion resistant polycarbonate dimensions width: 160mm height: 98mm depth: 65mm weight approx. 0.60kg (without camera) buoyancy slightly negative depth rating 100 metres features ttl capability: optical f...
Page 8
7 1 on/off button 6 m10 strobe mounting base 2 zoom lever 7 accessory coldshoe 3 shutter release lever 8 optical fibre mount 4 housing lock safety button 9 port with 52mm thread 5 housing lock 1 2 3 4 6 5 9 8 7.
Page 9
8 10 mounting holes for lcd magnifier attachment rails 16 ok button 11 info button 17 flash/ right selection button 12 movie button 18 left selection button 13 playback button 19 sequential shooting/ self-timer/ down selection button 14 mode dial 20 menu button 15 exposure compensation/ up selection...
Page 10
9 1. After verifying that the housing o-ring is in good condition, lightly coat it with the lubricant provided. 2. Make sure the o-ring groove located in the rear part of the housing is free from any foreign material; the groove can be cleaned with the aid of a microfiber cloth. 3. Place the o-ring ...
Page 11
10 to open the housing: to lock the housing: 2. Turn the housing lock anti- clockwise for 270 ° , until the lock reaches the “open” position as shown. 3. Close the housing while the housing lock is in the “open” position. 4. Turn the housing lock clockwise for 270 ° , until the lock reaches the “loc...
Page 12
11 1. Place the camera inside the housing as shown. 2. Confirm that all the controls of the housing are correctly engaged..
Page 13
12 1. Soak the housing system in fresh water after each salt water use, during which all control buttons/knobs should be operated a few times to avoid the accumulation of salt residue; wipe the housing with a towel before opening. 2. After each day of diving, it is advisable to have the main o-ring ...
Page 14
13 p.N. 25123 lcd magnifier attachment rails for na-s110/s120/tg3 p.N. 25106 lcd magnifier with dioptric adjustment.
Page 15
14.