Nautilus INSPIRATION Strength Owner's Manual - page 11
Page 8
! WARNING: Replace all worn cables immediately. The following conditions indicate some types of wear.
Torn or Cracked Cable Sheath that exposes cable
Stretched Cable Sheath
Kink in the Cable
Lubrication
Proper cleaning lubrication of guide rods will insure that each machine operates at its highest potential and that your
clients continue to enjoy a smooth efficient motion while exercising. Often lubrication is either neglected or in many cases
facilities over lubricate without cleaning the old dirty lubricant off prior to applying the new. This results in a build up of
dirty contaminants that will cause premature wear and poor operational function.
•
Use a general purpose lubricant that does not contain Teflon or solvent (such as 3-IN-ONE® oil.) Apply the
lubricant to a cotton cloth, and then run the cotton cloth up and down the guide rods as needed to apply a thin
coat.
•
Also apply oil to the incremental weight guide tracks.
•
In some environments that are extremely dry or dusty more frequent cleaning and lubrication may be required.