Assembly manual nb 3000 exercise bike.
Tools and hardware step 1: attaching the front stabilizer attach the front stabilizer (#8) to the frame (#1), using two washers (#13), two spring washers (#25) and two hex bolts (#12). Assembly instructions no. Description quantity 11 phillips head screw m5 (12mm) 2 12 hex bolt m8 (90mm) 4 13 flat w...
Nb 3000 exercise bike assembly instructions step 2: attaching the rear stabilizer attach the rear stabilizer (#9) to the frame (#1), using two washers (#13), two spring washers (#25) and two hex bolts (#12). Step 3: assembling handlebar & console mast attach the handlebar (#6) to the console mast (#...
Nb 3000 exercise bike assembly instructions step 4: attaching computer console plug the upper computer wire (#21) and the hand grip wire (#70) into the com- puter console (#7-1). Fasten the computer console (#7-1) to the console mast (#2) using four washers (#37) and four phillips head screws (#7-6)...
Nb 3000 exercise bike assembly instructions step 6: installing seat secure the seat (#5) onto the seat post (#3) by tightening the hex nut below the seat frame. Then loosen the pull knob (#14) and install the seat post into the frame (#1). You will want to adjust seat (#5) to desired angle after you...
Nb 3000 exercise bike final check assembly of your nautilus bike is now complete. Check again to insure that all parts are properly installed and that all nuts and bolts are completely secured. Get on the bike and check to see that the computer console and resistance system are working properly. Ple...
The nautilus group 1886 prairie way louisville, colorado 80027 1.888.471.0014 www.Nautilus.Com rev.C.
