Nav TV NTV-KIT625 Installation Instructions Manual - Options
Toyota 6 Navigation System Installation
10 |
P a g e
Options
Video Input harness
Camera Input harness
The Toyota 6 system is designed to accept multiple video and camera inputs, these
harnesses are sold separately and require different system settings. Please contact us
if you are interested in these optional features.
FAQ
Please follow all the steps in this installation manual, failure to do so might
void the product warranty and/or damage the factory radio!
Power
GPS Module has (2) led lights as indicators when system is powered
on. Both led lights should be lit when installed properly (if on). If
any of the light is dimmed, you should check for B+ and ACC power
sources at the main connector.
Display
No Display
1. There are two led lights at the GPS module to indicate data
and power. If led lights are OFF and radio is ON, check the
power fuse inside the black box from the main harness
2. Check all wiring connectors for any loose connection
3. Check all wiring shielding for any damage during the
installation process
4. Check all wiring for any type of damage
5. Check PCB ribbon cables for loose, misalignment, or
damage