Nav TV Tooki Audi User Manual - Pairing
Pairing
!
1. Press TEL on MMI Radio.
2. “Telephone - Tooki... ” and no signal strength indicates no phone
connected.
3. Start the pairing procedure on your mobile phone. Make sure the
Bluetooth feature is turned on. Consult your phoneʼs manual for
phone-specific pairing procedures.
4. Once your mobile phone discovers Tooki xxxx (last 8 digits will vary),
select and pair Tooki.
5. When prompted for a passkey, enter 6888 on your mobile phone.
6. Once pairing is complete, you should see your network providerʼs
name and signal strength indicator on the MMI Radio.
(Note that some telephones will not display a signal strength or network
provider when connected.)
7. You may pair up to 5 different mobile phones. For information on
phone selection, see the CONNECTING section.
8. Note that once a phone is paired, you should allow the Tooki to
automatically connect to it. Initiating the connection from the phone
may cause unreliable operation.
Note: the following phones require a special pairing code to be dialed from the radio
prior to pairing. Please enter the code that matches your phone, then press
.
3*330033*1 - Headset profile
3*330033*5 - Samsung A9xx
3*330033*2 - Disable Sync
3*330033*6 - Samsung D500
3*330033*3 - LG U8360
3*330033*7 - Samsung Z300, Z500
3*330033*4 - Sagem
3*330033*8 - Samsung Z310
!