Navico 10kW Installation Manual - page 71
Specifications | 69
Gain
Minimum 90 dB
Noise figure
NJT1969 @ 6 dB (average) at front-end input
Temperature range
+5ºF to +131ºF (-15ºC to +55ºC)
Relative humidity
93% at +104ºF (+40ºC)
Relative wind velocity
118 ft (36 m)/sec (maximum 70 knots)
6 kW Radar processor specifications
Processor dimensions
Width 5.6" (142 mm)
Height 2.2" (56 mm)
Length 7.9" (200 mm)
Processer weight
1.9 lbs (870 g)
Vibration EN60945
Waterproof No
rating
Temperature range
+5ºF to +131ºF (–15ºC to +55ºC)
Relative humidity
95% at 104ºF (+40ºC)
Power up time
Approximately 35 seconds
DC input
10.8 V to 36 V DC
Power consumption
3 W (when operating)
Leakage current <200 µA (when off, with a remote power input)
11.2 Radar system specifications: 10 kW
Radar Type
NS-004793
Scanner type
Open array
Radar Model
Simrad
Northstar
TX10s NS004793
DC input
21.6 to 41.6 V (24 V DC systems ONLY)
Scanner dimensions
1.5 ft high (448 mm) x rotation circle 6.25 ft (1910 mm)
Scanner weight
77.2 lb (35 kg) ± 10%
Vibration
Amplitude 2 x 13.2 Hz, ± 1 mm ± 10%
Amplitude 13.2 Hz to 100 Hz, gravity acceleration 0.7m/sec²
Waterproof IPX6
Plane of polarization
Horizontal
Preheating time
Minimum 90 seconds
Power consumption
250 W (maximum) at maximum wind velocity
Emission type
P0N. Passed JRC FCC/IC/R&TTE Type Certification:
FCC ID: CKENKE2102
IC ID: 768C-NKE2102
R&TTE: QQ-RTTE-17/03-01R
Peak power output
10 kW ± 50% under any pulse condition
Transmitter frequency
9410 MHz ± 30 MHz
Transmitter tube
Magnetron NJRC Model MSF1425B
Horizontal beam width
1.2º ± 10% (-3 dB width)
Vertical beam width
20º ± 20% (-3 dB width)
Side lobe level
Below -26 dB maximum (within ± 10º)
Below -30 dB maximum (outside ± 10º)
Rotation rate
27 rpm (minimum 20 rpm at 100 knot wind maximum)