Navico 2kW Installation Manual - page 40
38 | Connect Simrad NX40 / NX45, Northstar M84 / M121
6.1 Parts needed NX40/45 and M84/M121
Qnt.
Item
Description
Part No.
1
Scanner unit with
interconnection cable
2 kW or 4 kW
For scanner part
numbers (see
"Check the radar
parts" page 10)
Radar Processor
Qnt. Item
Description
Part
No.
1
2 kw Radar Processor
4 kw Radar Processor
AA010012
AA010013
If you're connecting the radar to a Simrad NX40/NX45 or a Northstar M841 or M121, you need
the AA010112 connection kit or serial connection cable AA010114 (NX40/45 with heading via
SimNet). These are not supplied as standard and must be ordered separately.
Radar connection kit AA010112
Qnt.
Item
Description
Part No.
Radar connection kit
AA010112
1
HD Radar serial comms
cable 3 m (9.75 ft)
Radar processor heading
sensor/display Y cable
Radar processor NMEA in
cable 250 mm (9.75")
AA010114
AA010113
AA010116
6 Connect Simrad NX40 / NX45, Northstar M84 / M121