Navig8r GPS-P43B User Manual

Summary of GPS-P43B

  • Page 1

    1 www.Navig8r.Com.Au table of contents contents important notices and warnings ................................................................... 5 this documentation ............................................................................................................................ 5 globa...

  • Page 2

    2 www.Navig8r.Com.Au table of contents 2.3.6 checking the details of the current position (where am i?) ................................................... 26 3. Navigation ................................................................................................ 28 3.1 selecting the destinati...

  • Page 3

    3 www.Navig8r.Com.Au table of contents 3.4.8 changing the road types used in route planning ..................................................................... 60 3.5 saving a location as a favourite destination ............................................................................... 61 3.6...

  • Page 4

    4 www.Navig8r.Com.Au table of contents 5.3 city centre ................................................................................................................................... 85 5.4 colour theme ................................................................................................

  • Page 5

    5 www.Navig8r.Com.Au impotant notices and warnings important notices and warnings this documentation thank you for choosing our product as your navigator. Read the quick start guide first and start using your device right away. This document is the detailed description of the navigation software and...

  • Page 6

    6 www.Navig8r.Com.Au what’s in the box what’s in the box unpack the box and identify the contents. You should have the following items: item description item description 1 the navig8r gps unit 2 gps device holder 3 bracket/windscreen mount 4 car charger (12v dc) 5 usb data cable 1 getting to know yo...

  • Page 7

    7 www.Navig8r.Com.Au warning 1.1 warning this navig8r gps should not be used in conditions of high temperature, high humidity or dusty conditions. We recommend that the navig8r is not left in direct sunlight for extended periods or left fitted to the windscreen, dashboard or glove box. Prolonged exp...

  • Page 8

    8 www.Navig8r.Com.Au connecting the car charger 1.3 mounting the gps unit in your vehicle fit the windscreen mount to the holder which you have attached to the rear of the gps unit and test mount the gps on the windscreen of the car. Choose a position that will not obstruct your vision whilst drivin...

  • Page 9: Navigation

    9 www.Navig8r.Com.Au navigation navigation.

  • Page 10

    10 www.Navig8r.Com.Au table of contents before using the navig8r please read the following personal navigation devices are designed to be an aid to navigation only. They are to be used in conjunction with all local road rules, laws and regulations. It is the responsibility of the driver to ensure th...

  • Page 11

    11 www.Navig8r.Com.Au getting started with your navig8r gps system 2 getting started with your navig8r gps system mount and connect the navig8r as described in this manual. Press the power button on the top of the navig8r. The navigation software will run automatically. The software is optimised for...

  • Page 12

    12 www.Navig8r.Com.Au getting started with your navig8r gps system 4. Select the language that you would like to hear the voice commands in. Button. Tap the , or the button to scroll through the selection. Tap the button to confirm the selection. For spoken street name, please select a voice marked ...

  • Page 13

    13 www.Navig8r.Com.Au getting started with your navig8r gps system 7. At the end of the instillation wizard you have the option to run the tutorial. Tap the “run tutorial” button to launch. Follow the prompts to learn about each feature. Tap the to complete the wizard an continue to the navigation s...

  • Page 14

    14 www.Navig8r.Com.Au getting started with your navig8r gps system 2.2 buttons and other controls on the screen when you are using the software, you usually tap buttons on the touch screen. You only need to confirm selections or changes if the application needs to restart, it needs to perform a majo...

  • Page 15

    15 www.Navig8r.Com.Au getting started with your navig8r gps system virtual keyboard alphabetic and alphanumeric keyboards to enter text and numbers. Each key is a touch screen button. Only available letters or numbers will be available to touch 2.2.1 using keyboards you only need to enter letters or...

  • Page 16

    16 www.Navig8r.Com.Au getting started with your navig8r gps system 2.2.2 beyond single screen taps. You usually need to tap the screen only once. However, some useful features can be accessed with combined touch screen tapping. Those are the following: action details tapping and holding the screen t...

  • Page 17

    17 www.Navig8r.Com.Au map screen 2.3 map screen 2.3.1 navigating on the map the map screen is the most frequently used screen of the software. A small live map is displayed on the start- up screen, the navigation menu, as a part of the button. Tap anywhere in this area to show the main map screen. T...

  • Page 18

    18 www.Navig8r.Com.Au map screen default data fields when cruising without a destination (tap and hold any of the fields to change its value): field description shows your current speed given by the gps receiver. Shows the speed limit of the current road if the map contains it. Shows the current tim...

  • Page 19

    19 www.Navig8r.Com.Au map screen 2.3.2 position markers 2.3.2.1 vehimarker and lock-on-road when your gps position is available, the software marks your current position with the vehimarker. By default, this marker is a blue arrow, but you can change this icon in settings. The exact location of the ...

  • Page 20

    Www.Navig8r.Com.Au 2.3.3 objects on the map 2.3.3.1 streets and roads the software shows the streets in a way that is similar to how the paper road maps show them. Their width and colours correspond to their importance: you can easily tell a street. 2.3.3.2 turn preview and ne when navigating a rout...

  • Page 21

    21 www.Navig8r.Com.Au map screen 2.3.3.3 elements of active route your navig8r shows the route in the following way: symbol name description current gps position and start point your current position displayed on the map. In pedestrian mode it is the exact gps position. If a vehicle is selected for ...

  • Page 22

    22 www.Navig8r.Com.Au map screen 2.3.4 manipulating the map tap the map anywhere to browse it during navigation. The map stops following the current position (the vehimarker, a red arrow by default, is not locked in a fix position on the screen any more) and control buttons appear to help you modify...

  • Page 23

    23 www.Navig8r.Com.Au map screen 2d or 3d view , tap this button to switch between the 3d perspective and 2d top-down map view modes. Compass in 2d map view mode , the direction of the compass shows north. Tap the button to switch to north-up view, and then tap again to rotate the map in the previou...

  • Page 24

    24 www.Navig8r.Com.Au map screen the buttons and their functions on this screen are the following: button description shortcut for tap this button to return to the map screen. N/a master volume slider adjusts the sound volume of the device. All sounds of the application are affected. The loudness of...

  • Page 25

    25 www.Navig8r.Com.Au map screen in settings, you can replace the buttons of the quick menu to other functions. The following options are available: button description shortcut for this function opens a 2d map scaled and positioned to show the entire route. My route / overview this function opens th...

  • Page 26

    26 www.Navig8r.Com.Au map screen 2.3.6 checking the details of the current position (where am i?) opened from the quick menu, this screen contains information about the current position (or about the last known position if gps reception is not available) and a button to search for useful places near...

  • Page 27

    27 www.Navig8r.Com.Au map screen the following services can be searched around the current position or the last known position: tap to display the nearest car repair centres tap to display the nearest medical and emergency services tap to display the nearest police stations tap to display the neares...

  • Page 28

    28 www.Navig8r.Com.Au navigation 3. Navigation you can set up your route in different ways: • if you need a route for immediate navigation, you can select the destination and start navigating to it right away (normal navigation). • you can also plan a route independently of your current gps position...

  • Page 29

    29 www.Navig8r.Com.Au navigation 3.1.1 entering an address or a part of the address if you know at least a part of the address, it is the quickest way to select the destination of the route. Using the same screen, you can find an address by entering: • the exact address, including house number • the...

  • Page 30

    30 www.Navig8r.Com.Au navigation tap the , or the button to scroll through the selection. Tap on the required county or state tap at any time to return to the previous screen. 4. Select the town or suburb a. Tap the town/suburb button to enter the town or suburb of your destination. Your current loc...

  • Page 31

    31 www.Navig8r.Com.Au navigation 5. Enter the street name. A. Tap street b. Start entering the street name on the keyboard. Use the keyboard to enter the name of the suburb or town. As above only the available letters are active on the keyboard. The available key will change after each letter is sel...

  • Page 32

    32 www.Navig8r.Com.Au navigation 7. A full screen map appears with the selected point in the middle. If necessary, tap the map somewhere else to modify the destination. The cursor ( ) will appear at the new location. Tap to confirm the destination or tap to select a new destination. 8. After a short...

  • Page 33

    33 www.Navig8r.Com.Au navigation 3.1.1.2 entering the midpoint of a street as the destination you can navigate to the midpoint of a street if the house number is not available: 1. Follow steps laid out in 3.1.1.1 and enter the suburb and the street address. 2. Instead of entering a house number tap ...

  • Page 34

    34 www.Navig8r.Com.Au navigation 3.1.1.4 selecting a city/town centre as the destination the centre of a town or suburb can also be selected: 1. Follow steps laid out in 3.1.1.1 and enter the suburb. 2. Enter name of the town or suburb to be used as the destination and tap . 3. Instead of selecting ...

  • Page 35

    35 www.Navig8r.Com.Au navigation 4. A full screen map showing the centre of the street will be displayed. If necessary, tap the map somewhere else to modify the destination. The cursor ( ) appears at the new location. Tap to confirm the destination or tap to select a new destination. 5. After a shor...

  • Page 36

    36 www.Navig8r.Com.Au navigation 3.1.2 selecting the destination from the places of interest you can select your destination from the places of interest included with your software. Using the same screen, you can find a place in different ways: • with the quick search feature, you can quickly find a...

  • Page 37

    37 www.Navig8r.Com.Au navigation 4. The places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). To reorder the list tap the button. 5. Tap the , or the button to scroll through the s...

  • Page 38

    38 www.Navig8r.Com.Au navigation 3. Preset search categories are displayed. Please select form the following. • if an active route exists • if there is no active route (destination is not selected), they are searched around the current position • if the current position is not available either (no g...

  • Page 39

    39 www.Navig8r.Com.Au navigation 4. The places in the list are ordered by the length of the necessary detour (when navigating a route) or by their distance from the current position (when no destination is given). To reorder the list tap the button. 5. Tap the , or the button to scroll through the s...

  • Page 40

    40 www.Navig8r.Com.Au navigation tap the options as required. Tap at any time to return to the previous screen to search around the current position or if it is not available, around the last know position. (the result list will be ordered by the distance from this position.) to search for a place w...

  • Page 41

    41 www.Navig8r.Com.Au navigation 6. Select one of the place subcategories (e.G. Hotel or motel) or tap “list all places” to list all places in the selected main category around the selected location or along the route . 7. Sometimes the list of brands in the selected place subcategory appears. Selec...

  • Page 42

    42 www.Navig8r.Com.Au navigation 12. If necessary, tap the map somewhere else to modify the destination. The cursor ( ) appears at the new location. Tap to confirm the destination or tap to select a new destination. 13. After a short summary of the route parameters, the map appears showing the entir...

  • Page 43

    43 www.Navig8r.Com.Au navigation to search around the current position or if it is not available, around the last know position. (the result list will be ordered by the distance from this position.) to search for a place within a selected town/suburb. (the result list will be ordered by the distance...

  • Page 44

    44 www.Navig8r.Com.Au navigation 6. Tap the button to search in the selected place category or select one of the place subcategories (e.G. Hotel or motel) to search in. 7. Tap if you have not done it before 8. Using the keyboard, start entering the name of the place. 9. After entering a few letters,...

  • Page 45

    45 www.Navig8r.Com.Au navigation 10. The places in the list are ordered by their distance from the current or last known position, from the selected city/town, from the destination or by the length of the necessary detour. To reorder the list, tap the button. 11. Browse the list if necessary and tap...

  • Page 46

    46 www.Navig8r.Com.Au navigation 3. Preset search categories appear, all for searching around the current position (or around the last known position if the current position is not available): tap to display the nearest car repair centres tap to display the nearest medical and emergency services tap...

  • Page 47

    47 www.Navig8r.Com.Au navigation 9. After a short summary of the route parameters, the map appears showing the entire route. The route is automatically calculated. 10. Tap to modify the route parameters or tap to start your journey. 3.1.3 selecting a map location as the destination 1. If you are on ...

  • Page 48

    48 www.Navig8r.Com.Au navigation 3.1.4 selecting the destination from your favourites you can select a location that you have already saved as a favourite to be your destination . Adding a location to the list of favourite destinations is described later in this manual. 1. Access the list of favouri...

  • Page 49

    49 www.Navig8r.Com.Au navigation 3.1.5 selecting one of the most likely destinations (smart history) the destinations that you have set earlier appear in the history list. Two of those recent destinations are shown in the destination menu for easy access. Smart history offers these locations based o...

  • Page 50

    50 www.Navig8r.Com.Au navigation 3.1.6 selecting a recent destination from the history the destinations that you have set earlier appear in the history . 1. Access the history: • if you are in the map screen, tap and then tap . • if you are in the navigation menu tap and then tap . 2. The list of re...

  • Page 51

    51 www.Navig8r.Com.Au navigation 3.1.7 building a route from the list of destinations (create route) you can also build your route destination by destination from the my route menu. 1. If you are on the map screen, tap to return to the navigation menu. 2. In the navigation menu, tap . 3. Tap . 4. Th...

  • Page 52

    52 www.Navig8r.Com.Au navigation 3.2 viewing the entire route on the map an overview of eth active route can be displayed: 1. If you are on the map screen, tap to return to the navigation menu. 2. In the navigation menu, tap . 3. Tap , the active route is displayed in its full length on the map toge...

  • Page 53

    53 www.Navig8r.Com.Au navigation 4. You have the following options on this screen (for detailed instructions on how to use them, see the next chapter): edit route: tap to edit the route: to add or remove destinations or change their sequence. You can also set a route start point other than your curr...

  • Page 54

    54 www.Navig8r.Com.Au navigation new route: tap to plan a new route to the newly selected location. The previous destination and waypoint(s) are deleted. Waypoint: tap to add the newly selected location as an intermediate destination to your route. The other destinations of the route remain intact. ...

  • Page 55

    55 www.Navig8r.Com.Au navigation 4. The first line is the start of the route, normally the current gps position. Tap and confirm your action at the warning message. 5. The destination menu appears and you can select the start point of the route the same way you select a destination. 6. When the new ...

  • Page 56

    56 www.Navig8r.Com.Au navigation 3.4.3 editing the list of destinations (edit route) you can edit the route by modifying the list of destinations. You can add or remove destinations, modify the start position or reorder the list. 1. If you are on the map screen, tap to return to the navigation menu....

  • Page 57

    57 www.Navig8r.Com.Au navigation 3.4.5 cancelling the active route to cancel the navigated route, do one of the following: • if you are on the map screen, tap and then . • if you have a route with waypoints you will need to tap • in the navigation menu, tap and then . The active route is cancelled w...

  • Page 58

    58 www.Navig8r.Com.Au navigation 3. Tap 4. Tap and then tap the different methods to see the affect on the route.* * calculating the alternative routes may take a few seconds to several minutes depending the length and complexity of the current route. Gives a quick route if you can travel at or near...

  • Page 59

    59 www.Navig8r.Com.Au navigation 3.4.7 changing the vehicle used in route planning to recalculate the active route for a different vehicle, do as follows. These changes can also be made in settings as described later in this manual. 1. If you are on the map screen, tap and then . 2. Tap and then sel...

  • Page 60

    60 www.Navig8r.Com.Au navigation 3.4.8 changing the road types used in route planning to recalculate the active route with different road type preferences, do as follows. These changes can also be made in settings as described later in this manual 1. If you are on the map screen, tap and then . 2. T...

  • Page 61

    61 www.Navig8r.Com.Au navigation 3.5 saving a location as a favourite destination you can add any location to favourites, the list of frequently used destinations. Planning a route to one of the favourite destinations is described earlier in this manual. 1. Select a destination as described before. ...

  • Page 62

    62 www.Navig8r.Com.Au navigation 3.6 watching the simulation of the route you can run a simulated navigation that demonstrates the active route. Do as follows : 1. If you are on the map screen, tap to return to the navigation menu. 2. In the navigation menu tap . 3. Tap 4. Scroll down the list and t...

  • Page 63

    63 www.Navig8r.Com.Au reference guide 4 reference guide on the following pages you will find the description of the different concepts and menu screens used in this software. 4.1 concepts 4.1.1 smart zoom smart zoom provides much more than just a usual automatic zoom feature: • while following a rou...

  • Page 64

    64 www.Navig8r.Com.Au reference guide 4.1.4 route calculation and recalculation your software calculates the route based on your preferences: • route planning methods: gives a quick route if you can travel at or near the speed limit on all roads. Usually the best selection for fast and normal cars. ...

  • Page 65

    65 www.Navig8r.Com.Au reference guide • manoeuvre restrictions and directional constraints (if they are applied to bicycles in the map data) are taken into account when planning a route. • roads are used only if access for bicycles or pedestrians is allowed. • controlled-access roads are excluded fr...

  • Page 66

    66 www.Navig8r.Com.Au reference guide • road types used or avoided in route calculation: you might need to avoid motorways when you are driving a slow car or you are towing another vehicle. Charge roads are pay roads where you can purchase a pass or vignette to use the road for a longer period of ti...

  • Page 67

    67 www.Navig8r.Com.Au reference guide for some of the alert points, the enforced or expected speed limit is available. For these points, the audio alert can be different if you are below or above the given speed limit. • only when speeding: the audio alert is only played when you exceed the given sp...

  • Page 68

    68 www.Navig8r.Com.Au reference guide in the top right corner, the gps reception quality icon shows the current accuracy of the position information. Icon description the software has no connection to the gps receiver: gps navigation is not possible. Devices with a built-in gps receiver such as the ...

  • Page 69

    69 www.Navig8r.Com.Au reference guide 4.2 'more' menu the 'more' menu provides you with various options and additional applications. Tap the following buttons: , . Button description you can configure the program settings, and modify the behaviour of the software. Fine-tune route planning options, c...

  • Page 70

    70 www.Navig8r.Com.Au reference guide select a country from the list and see useful driving information about the selected country. Information may include speed limits on different road types, the maximum blood alcohol level and any compulsory equipment you need to show when stopped by the police. ...

  • Page 71

    71 www.Navig8r.Com.Au reference guide the recommended route is not always the same between two points. Offline statistical traffic information (historical traffic data or traffic patterns) can be taken into account in the route calculation based on the time of day and the day of week whenever suitab...

  • Page 72

    72 www.Navig8r.Com.Au reference guide 4.3.1 sound and warnings adjust the sound volume, mute your device or change the voice guidance language. In addition, you can enable and set up different warnings and alerts. Button description tap this button to adjust the volume of the different sounds in the...

  • Page 73

    73 www.Navig8r.Com.Au reference guide turns all the proximity alerts on or off regardless of individual settings. Maps may contain driver alert information. Tap this button to turn on or off these warnings and to set the distance from the hazard to receive the warning at. These can be set individual...

  • Page 74

    74 www.Navig8r.Com.Au reference guide you can control the volume of the following sound types: button description this is the main volume control. These controls affect all below sounds. It can also be accessed from the quick menu. This control affects the volume of the guidance sounds (verbal instr...

  • Page 75

    75 www.Navig8r.Com.Au reference guide this function opens the trip monitor screen where you can manage your previously saved trip logs and track logs. More / trip monitor this function opens the list of manoeuvres (the itinerary). Tap the top of the map screen during navigation. With this function y...

  • Page 76

    76 www.Navig8r.Com.Au reference guide 4.3.4 route settings these settings determine how routes will be calculated. Button description you can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types can be excluded from the route, or some of the res...

  • Page 77

    77 www.Navig8r.Com.Au reference guide vehicle types: • manoeuvre restrictions and directional constraints are taken into account when planning a route. • roads are used only if access for cars is allowed. • private roads and resident-only roads are used only if they are inevitable to reach the desti...

  • Page 78

    78 www.Navig8r.Com.Au reference guide • manoeuvre restrictions and directional constraints are taken into account when planning a route. • roads are used only if access for buses is allowed. • private roads, resident-only roads and walkways are excluded from routes. • manoeuvre restrictions and dire...

  • Page 79

    79 www.Navig8r.Com.Au reference guide 4.3.5 green routing you can enter the vehicle information to allow the software to calculate the most environmentally friendly way to get to your destination. This information is used when calculating the route to offer an alternative to the basic route setting....

  • Page 80

    80 www.Navig8r.Com.Au reference guide 4.3.6 map settings you can fine-tune the appearance of the map screen. Adjust the map view to your needs, choose suitable colour themes from the list for both daytime and night use, change the blue arrow to a 3d car model, turn track logging on or off, and manag...

  • Page 81

    81 www.Navig8r.Com.Au reference guide this feature is not available on this model. Turn on or off track log saving, that is, saving the sequence of the locations your journeys go through. Select which places to show on the map while navigating. Too many places make the map crowded so it is a good id...

  • Page 82

    82 www.Navig8r.Com.Au reference guide 4.3.8 display settings display related settings include menu animations, separate skins for daytime and night use and the brightness of the display. When animation is turned on, buttons on menus and keyboard screens appear in an animated way. Screen transitions ...

  • Page 83

    83 www.Navig8r.Com.Au reference guide 4.3.10 trip monitor settings trip logs and track logs contain useful information about your trips. Trip logs can be saved manually when you reach your destination or you can turn on the automatic saving here. You can access these logs in the trip monitor. Trip m...

  • Page 84

    84 www.Navig8r.Com.Au reference guide 4.3.12 reset to defaults this feature should be used with great care. When exercised the software is restarted and all saved history, logs and favourites are cleared. The software will restart and all settings will be reset to default. Data erased during this pr...

  • Page 85

    85 www.Navig8r.Com.Au glossary 5 glossary 5.1 2d/3d gps reception the gps receiver uses satellite signals to calculate its (your) position and needs at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the si...

  • Page 86

    86 www.Navig8r.Com.Au glossary 5.6 map the software works with digital maps which are not simply the computerised versions of traditional paper maps. Similarly to the paper road maps, the 2d mode of digital maps show you streets, roads, and elevation is also shown by colours. In 3d mode, you can see...

  • Page 87: Hardware

    87 www.Navig8r.Com.Au hardware hardware.

  • Page 88

    88 www.Navig8r.Com.Au main system menu 6 main system menu to access the navig8r main system menu tap on the exit button in the navigation software. Item title description a main title bar displays the current location within the menu structure b photo display displays images on the navig8r or storag...

  • Page 89

    89 www.Navig8r.Com.Au main system menu 6.1: main title bar the main title bar displays the title of the screen currently on display. 6.2 photo display tap on the photo icon in the main menu. Select the folder containing the images to display. Tap the screen to display the control buttons. Return to ...

  • Page 90

    90 www.Navig8r.Com.Au main system menu 6.4 time and date the current time and date is displayed on the top menu bar. System time is set by satellite signals. Users must set time zone in the settings menu to ensure correct time and daylight savings zones. If travelling interstate please ensure that t...

  • Page 91

    91 www.Navig8r.Com.Au main system menu 6.7 video play pause stop previous file next file random play repeat play tap the screen to toggle control buttons return folder view exit.

  • Page 92

    92 www.Navig8r.Com.Au system settings 7 system settings item title description a volume adjust the volume level b language sets the language in the main menu* c backlight adjusts the backlight level for the lcd screen d time & date sets the time, date and time zone e battery status displays the curr...

  • Page 93

    93 www.Navig8r.Com.Au system settings 7.1 volume tap to increase the volume or to decrease the volume level. Check the tap sound box to enable sounds for screen taps. Tap to return to the previous screen with out accepting the changes. Tap to accept the changes. 7.2 language tap the language to be d...

  • Page 94

    94 www.Navig8r.Com.Au system settings 7.4 time & date date set the system date time set the system time zone set your current location time zone tap to return to the previous screen without accepting the changes. Tap to accept the changes. System time and date is updated automatically when the navig...

  • Page 95

    95 www.Navig8r.Com.Au system settings 7.6 system information the system information screen provides information about the hardware and software versions used in the navig8r. Tap or to return to the previous screen displays information about the gps signal satellite locations and numbers, latitude, l...

  • Page 96

    96 www.Navig8r.Com.Au specifications specifications ○ weight: 170g ○ product size: 122.5mmx79.5mmx12.5mm ○ 4.3 inch touch panel (113mm), tft screen ○ display colour: 65k colours ○ display resolution: 480 x 272 pixels ○ cpu chipset: samsung s3c2451 processor 400mhz ○ operating system: microsoft wince...

  • Page 97

    97 www.Navig8r.Com.Au frequently asked questions frequently asked questions q: what is gps? A: gps stands for global positioning system. Officially named navstar gps, it is a satellite-based radio navigation system developed and operated by the u.S. Dept of defence. Gps is operated and controlled by...

  • Page 98

    98 www.Navig8r.Com.Au frequently asked questions gps navigation systems require a clear line of sight to work effectively and will not work indoors. Function may also be impeded in heavily wooded areas and city streets between high rise buildings that may impede line of sight to satellites. In conju...

  • Page 99

    99 www.Navig8r.Com.Au frequently asked questions q: what other factors will affect the accuracy of my navig8r? A: while gps receivers can be quite accurate, there are several factors that can impede the performance and accuracy of the system. Gps receivers require a clear line of sight to the satell...

  • Page 100

    100 www.Navig8r.Com.Au frequently asked questions q: i have finger prints over the screen of my navig8r, how do i clean it? A: the navig8r can be cleaned by using a soft damp to dry cloth. Lightly wipe the screen and the case as required. Use another dry soft cloth to make sure that there is no mois...

  • Page 101

    101 www.Navig8r.Com.Au frequently asked questions q: i am having issues syncing with the satellite a: ensure that you have clear access to the sky. Turn the unit off and back on again. If the unit has been turned off for a period of time it can take a few minute to sync with the satellites again. Q:...

  • Page 102

    102 www.Navig8r.Com.Au end user licence agreement end user licence agreement 1 the contracting parties 1.1 this agreement has been entered into by and between nav n go kft. (registered seat: 23 bérc utca, h-1016 budapest, hungary; company reg.No.: 01-09-891838) as licensor (hereinafter: licensor) an...

  • Page 103

    103 www.Navig8r.Com.Au end user licence agreement 5 rights under copyright 5.1 unless otherwise provided by law or contractual provisions, the licensor is the sole and exclusive owner of all material copyrights vested in the software product. 5.2 copyrights extend to the whole software product and t...

  • Page 104

    104 www.Navig8r.Com.Au end user licence agreement 7.1.5 to evade the protection of the software product or to modify, circumvent or obviate such protection through technological or by any other means; 7.1.6 to modify, extend, transform the software product (in whole or in part), to separate it into ...

  • Page 105

    105 www.Navig8r.Com.Au end user licence agreement 8.5 the licensor also draws the attention of the user to the fact that, when using the software product in any form of vehicle, observing the traffic regulations and rules (e.G. Use of obligatory and/or reasonable and suitable security measures, prop...

  • Page 106

    106 www.Navig8r.Com.Au end user licence agreement the relevant information and data in connection with the contents and services provided by third parties are available at www.Navngo.Com. The user hereby acknowledges that the contents and services provided by third parties may only be used at the ri...

  • Page 107

    107 www.Navig8r.Com.Au copyright note copyright note the product and the information contained herein is subject to change without prior notification. This manual may not, in whole or in part, be reproduced or transmitted in any form either electronically or mechanically, including photocopying and ...