Navigon 14 series User Manual - 11 Troubleshooting
User’s manual NAVIGON 14xx | 24xx
- 80 -
Troubleshooting
11 Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the NAVIGON 14xx | 24xx.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON AG website. (Refer to
"Questions about the product" on page 7)
I have connected a charger to the NAVIGON 14xx | 24xx. A connection to a
computer is shown on the display.
- or -
I have connected the NAVIGON 14xx | 24xx to a computer but it is not
detected as a removable disc.
The USB connector of the charger is not fully inserted in the case.
- or -
The USB connector is not connected correctly.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Without delay, insert the USB connector from the charger into the
corresponding socket of the NAVIGON 14xx | 24xx as far as it will
go. (Refer to "Description of the NAVIGON 14xx | 24xx" on page 8)
My NAVIGON 14xx | 24xx makes no response any longer, the screen is
frozen.
Perform a reset.
1. Use a thin object to press the Reset key. (Refer to "Description of
the NAVIGON 14xx | 24xx" on page 8)
2. Press
the (On/Off) key and keep it pressed until the device
switches on again.
The software will be restarted. Your settings and your saved
destinations and routes will be retained.
It seems to me that the battery of my NAVIGON 14xx | 24xx becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In
the
N
AVIGATION
window tap on Options > Settings > General.
2. Set the values for Brightness Day and Brightness Night as low as
possible.
3. Tap
on
OK.