Navigon 2200T Series Quick Start Manual - page 90
68
NAVIGON 2000S | 2200T Series User’s Guide
September 2008
NAVIGON, INC.
Routes
Accessing the Route Planning Window
2. Select:
•
Enter an Address
to search for a location address.
•
Search for a POI
to search for a POI.
•
My Destinations
to select a location from the
F
AVORITES
or
L
AST
D
ESTINATIONS
lists.
•
My Address
to select your home address. (Only available if you have already
specified a home address.)
•
Current Location
to specify your current position as the starting point.
3. Enter the starting point. (See the corresponding section of “Destination Selection”
on page 35.)
4. Tap the
Options
button.
5. Tap the
Add to Route
button.
The selected destination appears next to the
“0”
, indicating that it is the starting
point of the route.
Changing the starting point
On the R
OUTE
P
LANNING WINDOW
:
1. Tap the
Specify Starting Point
button.
The
S
TARTING
P
OINT
menu opens.
2. Select a different starting point by following the above steps.
Entering route points
Route points are destinations on the route that you want to navigate to.
The flow number for each route point can be found on a button in front of it.
On the R
OUTE
P
LANNING WINDOW
:
1. Tap the
Add Route Point
field.
The
R
OUTE
P
OINT MENU
opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of “Ways to Search for Des-
tinations” on page 38.)
4. Tap the
Options
button.
The selected route point is shown next to its flow number.
5. Tap
Add to Route
button.
6. Repeat these steps for each additional destination that you want to add to your
route.