Navigon 3100 User Manual - page 26

User’s manual NAVIGON 3100 | 3110 

- 24 - 

Routes with various stages  

The R

OUTE 

P

LANNING

 window is open. The starting point and at least 

one stage has been entered. 

1.  Tap the Show Route button. 

The map screen opens in Preview mode. 

The starting point and the route stages are marked by flags. For 

each stage, the distance and the estimated trip time is given. These 

data are also given for the entire trip. 

6.3.2 

Simulating the route 

You can also just simulate a navigation. 

Note: The reception of GPS-signals is not necessary for the simulation. 

Simulation is restricted to routes of 60 mi max. 

You have calculated and displayed a route. 

2. Tap 

Options > Simulation. 

The route will be recalculated for simulation purposes. Simulation 

starts when calculation has finished. 

End simulation 

You may stop a simulation at any moment. 

1. Tap 

the 

 (Back) button. 

A dialog box will prompt you to confirm the navigation cancel. 

Afterwards, the M

AIN WINDOW

 opens. 

6.3.3 Starting 

navigation 

You have calculated and displayed a route. 

The calculation of a route is based on so called route options. 

1.  If you want to view or change these options, click on the 

Route Profile button. 

Note: If you change the route options, these remain valid for 

subsequent navigations. 

You can get information regarding changing individual route profiles by 

tapping the corresponding 

 Help buttons. 

2.  Tap the Start Navigation button or simply start driving.