Navigon MobileNavigator 5 User Manual - page 99
User's manual MobileNavigator | 5
Configuring MobileNavigator
- 97 -
8.1.4
Signpost information
Signpost information On the S
IGNPOST INFORMATION
screen, you may effect the
following modifications:
The Show traffic signs command indicates whether signposts
indicating exits from motorways or highways are currently being
displayed or not.
Tap the Show traffic signs command to toggle between On and
Off mode.
The new mode is now indicated on the button.
Note: This information can only be displayed when it is contained
in the cartographic material.
8.1.5
Speed limit
Speed control
On the S
PEED LIMIT
screen, you may effect the following
modifications:
Setting
Significance
Show traffic signs
This command indicates whether signposts
indicating speed limits are currently being
displayed or not.
Tap the Show traffic signs command and
select whether speed limits should be
displayed
Always
On speeding only or
Never.
Warning in built-up
areas
This command indicates from how much
speeding on you want to be warned when
driving within built-up areas.
Tap the Warning in built-up areas
command to select another value or to set
it to Never.
Warning outside
built-up areas
This command indicates from how much
speeding on you want to be warned when
driving outside built-up areas.
Tap the Warning outside built-up areas
command to select another value or to set
it to Never.
Warning
This command indicates whether you want
to be warned on speed limits that are valid
on rain, on snow, or at certain hours.
Tap the Warning command to set the
value to Yes or to No.
Note: This information can only be displayed when it is contained
in the cartographic material.