Navigon MobileNavigator 5 User Manual - page 123

User's manual MobileNavigator | 5 

Appendix 

- 121 -  

9.1.2  Bluetooth module 

Equipping the GPS 

receiver with the 

Bluetooth module… 

1.  Disconnect any cable from the GPS receiver. 

2.  Insert the Bluetooth module. 

3.  Reconnect the cables. 

4.  Turn the GPS receiver on. 

The blue diode is blinking (in intervals of 1 second). 

5.  Start MobileNavigator on your Pocket PC in order to 

establish the Bluetooth-connection in your navigation 

software. 

Note: For detailed information on Bluetooth connections 

between your Pocket PC and other Bluetooth-devices, please 

refer to the manual of your Pocket PC.  

6.  On the main screen, tap the Configuration button. 

The C

ONFIGURATION

 screen opens. 

7.  Via the arrow buttons, select GPS. 

Automatic detection 

8.  Tap Automatic detection when you have reconnected or 

changed your GPS-receiver. Follow the instructions on the 

screen.