Navilock NL-6022MP u-blox NEO-6P Operation Manual

Manual is about: MD6/serial receiver roof mount marine version

Summary of NL-6022MP u-blox NEO-6P

  • Page 1

    Nl-6022mp u-blox neo-6p md6/serial receiver roof mount marine version operation manual (62448).

  • Page 2: 1. Introduction

    1. Introduction the nl-6022mp is a md6/serial gnss receiver with internal antenna and ublox neo-6p gps module. This module allows a positioning accuracy of under one metre through a combination of ppp (precision point positioning) and sbas technologies. The md6/serial interface enables connection to...

  • Page 3

    2. Starting operation you may connect the nl-6022mp either to the serial interface of your pc using an md6 to db9 adapter cable, or to the usb interface of your pc using an md6 to usb adapter cable. Md6 to db9: http://www.Navilock.De/produkte/g_61265/merkmale.Html?Setlanguage=en md6 to usb: http://w...

  • Page 4

    If the nmea protocol is displayed in u-center, but you cannot find a receiver in the application software, the connection problem is not with the receiver, but with the selected software setting. In this case, the software manufacturer support center may be able to help you. After starting the u-cen...

  • Page 5

    6. Egnos configuration with u-center 7.Xx nl-6022mp use egnos as default. In the configuration menu you can check these options. For detailed information please use the documentation from u-blox http://www.U-blox.Com . 7. Assist gps configuration with u-center 7.Xx the nl-6022mp supports assistnow! ...

  • Page 6

    8. Possible sources of error and their elimination 8.1 after connecting to the appropriate port you can not find the above mentioned com port and the receiver has no function. Test if the port with another device. If another device operate it, please contact support. 8.2 you will not receive satelli...

  • Page 7

    9. Specifications chip set manufacturer/type: ublox neo-6p gps channels: 50 channels sensitivity: -160 dbm gps frequency: l1, 1,575.42 mhz gps c/a code: 1.023 mhz chip rate target precisions: gps position horizontal: sbas + ppp sbas + ppp demonstrated under following conditions: 24 hours, stationary...

  • Page 8

    10. Certificate • ce • fcc 11. Warranty period your gps receiver will be repaired free of charge within the legal warranty period, unless it was damaged due to external cases, humidity dropping or other damages due to improper usage. Your dealer is always ready to help you. Please send your unit for...

  • Page 9

    15. Brands of third parties brands, trade names, product names and logos of third parties mentioned in this documentation may be trademarks or registered trademarks of the respective owners. Conformity declaration please download the declaration of conformity from http://www.Navilock.De/support/ in ...